Is it necessary to remove a business card that has fallen into the car window?

1 Answers
StEvangeline
07/30/25 7:21am
It is not necessary to remove it as long as it does not cause any malfunctions. Here is some relevant information: 1. Noise generation: The business card may rub against the car door and produce noise, but for the vehicle, the noise generated by the card is almost negligible. 2. Jamming the window lifting mechanism: This issue is also unlikely to occur because business cards are relatively thin and usually fall directly to the bottom of the door panel, thus having minimal impact on the window lifting mechanism. 3. Inspection: Before driving, if you notice a small card on the window, be sure to remove it first. If you are not careful, the card may be pulled into the car door when the window is rolled down.
Was this review help?
4
4
Share
More Forum Discussions

How to Shift Gears in an 8-Speed High-Low Range Transmission?

8-Speed high-low range shifting method is as follows: 1. Toggle the high-low range switch upward to engage high range, and downward for low range; 2. Gears 1 through 6 are forward gears, R is reverse gear, and N is neutral. A manual transmission vehicle uses a manually operated mechanical gearbox to adjust speed, meaning shifting the gear lever changes the gear meshing positions inside the transmission, altering the gear ratio to achieve speed variation. The clutch must be depressed to move the gear lever. The method for starting a truck is: 1. Fully depress the clutch pedal; 2. Move the gear lever to engage 1st gear as the starting gear; 3. Lightly press the turn signal lever downward to activate the left turn signal, alerting vehicles ahead and behind; 4. Press the horn button to warn pedestrians in front of the vehicle of the impending start; 5. Release the vehicle's manual parking brake; 6. Gradually lift the left foot until the clutch reaches the half-engaged position, causing the vehicle to vibrate slightly; 7. As the vehicle begins to move, release the clutch and gently press the accelerator.
11
4
Share

What is the 0-100 km/h acceleration time of the Corolla Hybrid in Power mode?

Toyota Corolla Hybrid acceleration test. Taking the Corolla Hybrid 1.8L CVT flagship version as an example, the 0-100 km/h acceleration time is approximately 11.28 seconds. Speed description: At the initial moment of acceleration, the hybrid system drives the wheels with the electric motor. You can feel that the power response is not very rapid, and the acceleration experience is even inferior to that of the Corolla 1.8L model. It feels somewhat sluggish at the start, and the subsequent acceleration also doesn't feel particularly fast. Overall fuel consumption: However, the Corolla Hybrid has the significant advantage of low fuel consumption. It's unreasonable to expect it to also have very strong acceleration capabilities. Given its hybrid nature, this acceleration time is already considered quite good. For comparison, the Corolla 1.6L CVT version takes over 10 seconds for the 0-100 km/h sprint, while the 1.8L version is only slightly faster by about 0.2 seconds, with not a particularly significant difference.
15
2
Share

What is the Anis Remus Prototype?

The Anis Remus Prototype is the Nissan Silvia-S13. Specifications of the Silvia-S13: The S13 is an FR (front-engine, rear-wheel-drive) vehicle, with mechanical specifications largely similar to the 180SX. In fact, S13 is simply a general term for the chassis code of that generation of Nissan Silvia, while the 180SX is coded as RPS13. The 180SX, featuring the pop-up headlights that were very popular in the 1980s, is essentially a sister model of the S13 Silvia. Horsepower of the Silvia-S13: The S13 has only 200 horsepower, less than the previous generation's 220 horsepower, but its weight distribution is more balanced than the previous generation. Combined with Nissan's multi-link suspension system, its steering and handling capabilities are significantly improved. The 180SX (RS13), a sister car of the S13, was introduced to the U.S. market in 1989. In North America, the Silvia-S13 is also known as the 240SX.
3
3
Share

What kind of car is Chevrolet?

Chevrolet is the transliteration of the founder's name, and the Chevrolet logo features a stylized bowtie. Chevrolet offers a wide range of models, from small cars to large four-door sedans, from vans to large pickup trucks, and even from SUVs to sports cars. The Chevrolet brand was introduced to China by SAIC-GM on January 18, 2005. Below is some related information about Chevrolet: Introduction to Chevrolet: Chevrolet is an automobile brand under General Motors (GM), founded on November 3, 1911. Chevrolet is also known as Chevy and was acquired by GM in 1918. Chevrolet's Models: From small cars to large four-door sedans, from vans to large pickup trucks, and even from SUVs to sports cars. Main Products: Sedans: Monza, Malibu XL, Orlando, Onix, Cruze, Cruze Hatchback. SUVs: Equinox, Tracker, Trax. Sports Car: Camaro RS (6th generation). Pickup Trucks: Colorado, Silverado.
13
4
Share

What Causes the Abnormal Noise When the Odyssey Drives on Uneven Roads?

Odyssey driving on uneven roads abnormal noise reasons are as follows: Damaged shock-absorbing spring plate or guide plate: When the vehicle is driving on uneven roads, the noise increases, and pressing the brake pedal reduces or eliminates the noise. This is due to damage, deformation, or detachment of the disc brake's brake shoe support plate, shock-absorbing spring plate, or guide plate, which increases the gap between the brake shoe and the caliper support frame, causing them to collide and produce noise. You can go to a repair station to fix the deformed parts or replace the detached ones. Excessive clearance in the front suspension ball joint: When the vehicle is driving at low speed on bumpy roads, the front axle area produces continuous clicking sounds. The worse the road condition, the louder the noise, and the noise intensifies with increasing speed. After stopping, forcefully shaking the front of the vehicle will produce abnormal noise. This is because the gap between the ball joint and its seat becomes larger and severely loose. Since the ball joint seat is a sealed structure and cannot be disassembled, the only solution is to replace it at a repair station.
8
5
Share

What is the fuel tank capacity of the Grand Commander in liters?

The fuel tank capacity of the Grand Commander is 70 liters, which is the officially published data. Owners who have purchased the Grand Commander can also check this information on the vehicle's configuration sheet. The Grand Commander requires 95-octane fuel, with a fuel consumption of 8.4-8.8L per 100 kilometers. A full tank of fuel can provide a driving range of 795 to 833 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel filled may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel filled may exceed the calibrated tank capacity.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.