Is it necessary to press the brake when starting the Levin?

[Marley]

It is necessary to press the brake when starting the engine. Below are the relevant details: Necessity of pressing the brake when starting: This is a standard safety driving practice, particularly for manual transmission vehicles. It prevents the car from lurching forward if the gear is not in neutral before starting, which could lead to an accident. Steps for starting the car: Turn the ignition key to the ON position and wait for 5 to 8 seconds before turning the key to the start position to ignite the engine. Once the engine starts successfully, immediately release the ignition key, allowing it to return automatically to the ON position. If the engine fails to start, do not continuously operate the starter for more than 5 seconds. Wait at least 15 seconds before attempting to start again to protect the battery and starter. If the engine does not start after three consecutive attempts, there may be an issue with the engine, and further attempts will likely be ineffective.

[MacMakayla]

The Leiling car indeed requires stepping on the brake when starting the engine. This is a standard safety design for modern automatic transmission vehicles, and I have personally confirmed this with several models I've driven. Its brake-start interlock system is designed to prevent the vehicle from moving unexpectedly while in gear, which could lead to accidents. If you don't step on the brake, turning the key or pressing the start button won't work, and the car may only enter ACC mode. I recommend developing this habit, especially for beginners practicing in parking lots, to familiarize themselves with the operation and ensure smooth starts every time. Additionally, if the car doesn't respond, first check if the brake pedal is firmly pressed. Safety should never be taken lightly, and Toyota's system is quite reliable. I also recommend regular maintenance checks on the brake sensors.

[DelMariana]

When I first drove the Leiling, I didn't know that I needed to press the brake to start the engine. I thought there was something wrong with the car and tried repeatedly without success. Later, a friend pointed out that this is a safety feature—pressing the brake sends a signal to the control system to allow ignition. Now that I've learned it, the operation feels completely natural. As a novice driver with one year of experience, I think this design is very intuitive and helps avoid potential risks, such as rolling back when starting on a slope. I recommend unfamiliar drivers spend some time practicing in an open area or refer to the manual to reinforce the habit. Don’t panic like I did at first—once it becomes routine, it’s much easier. Remember, you must press the brake firmly to start the engine, or you’ll just waste your effort.

[VonAdrian]

When starting the Ralink, you must press the brake. Having driven automatic transmission cars for over a decade, I fully understand this is a fundamental operation to prevent accidents. Without pressing the brake, the car won't start; at most, the electrical system will activate. Almost all new Toyota models are designed this way, prioritizing safety. If you forget to press the brake, don't panic—check if your foot is in the correct position. Developing this habit ensures peace of mind and safety. While there's little change in daily driving, it can be life-saving in critical moments.