Is it necessary to press the brake for one-button start and stop?

1 Answers
JourneyAnn
07/29/25 3:01pm
One-button start and stop require pressing the brake. The one-button start system in cars is part of the keyless entry system, replacing the traditional mechanical ignition with a button. The one-button start device is a component of smart cars, simplifying the ignition process with a single button that can also turn off the engine. This device is typically installed by modifying the original key slot or as a separate panel. It can be installed in vehicles of all configurations. Steps for one-button stop and parking: 1. Press the brake; 2. Engage the handbrake; 3. Shift the gear lever to "P" position; 4. Press the ignition button to turn off the engine. Correct steps for one-button start: 1. Fasten the seatbelt; 2. Press the brake; 3. Press the ignition button to the first position; 4. Shift to D (or R) gear; 5. Release the handbrake; 6. Release the foot brake; 7. Press the accelerator; 8. Start the engine and begin driving.
Was this review help?
12
2
Share
More Forum Discussions

How many more years can National V vehicles be driven after the implementation of National VI?

After the implementation of National VI, there are currently no regulations issued to restrict or ban National V vehicles. Below is more information about the National V emission standards: 1. Contents of the National V emission standards: The National Fifth Stage Motor Vehicle Pollutant Emission Standards, also known as the "National V Standards," have an emission control level equivalent to the European Union's fifth stage emission standards currently in effect. The EU has been enforcing these standards since 2009, which impose stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles emitted by motor vehicles. From National I to National IV, each upgrade in standards reduces vehicle pollution by 30% to 50%. 2. Purpose of the National V emission standards: Improving environmental quality is an international consensus, and we cannot focus solely on developing the automotive industry while neglecting the environment. For China to become a strong automotive nation, it must not lag behind in technology or environmental protection. The image of an "environmental ambassador" is even more important than that of a "strong automotive nation."
13
2
Share

Is it considered overloading for a sedan to carry 5 adults and 1 child?

A sedan carrying 5 adults and 1 child is considered overloading. Below is relevant information about passenger capacity in sedans: 1. Legal knowledge: According to Article 49 of the "Road Traffic Safety Law of the People's Republic of China": Motor vehicles shall not carry more passengers than the approved number, and passenger vehicles shall not carry goods in violation of regulations. Driving a passenger vehicle (excluding buses) or school bus with more passengers than the approved number but less than 20% will result in a fine and 3 penalty points, while exceeding the approved number by 20% or more will result in a fine and 6 penalty points. 2. Precautions: The traffic law stipulates that the approved passenger capacity is based on the number indicated on the vehicle's registration certificate, without specifying requirements for passengers' height, weight, age, etc. For example: A standard sedan is approved for 5 passengers, while an MPV business vehicle is approved for 7 passengers (as indicated on the registration certificate).
5
2
Share

Why can't the vehicle battery be charged?

Vehicle battery failure to charge is mainly caused by plate sulfation. Below is relevant information about vehicle battery plate sulfation: 1. Introduction: Battery sulfation refers to excessive lead sulfate deposits on the battery's internal plates, leading to increased internal resistance and reduced capacity. Symptoms include a sharp voltage drop during discharge, rapid voltage rise during charging, quick temperature increase in the battery, slow density increase, premature bubble generation, or even bubbles appearing immediately upon charging. 2. Solution: For batteries used for a long time (over three years), there is generally no repair value, and they should be directly replaced with new ones. For batteries used for a shorter period with mild sulfation due to short-term excessive discharge, desulfation charging can be used for repair, but the battery capacity can only be restored to about 80% of its rated capacity.
8
1
Share

How many tons can a 4-axle truck carry?

A 4-axle truck can carry a maximum of 36 tons of cargo. Below is relevant information about 4-axle trucks: 1. Introduction: According to Article 3 of the "Regulations on the Management of Over-Limit Transport Vehicles on Highways," an over-limit transport vehicle refers to a cargo transport vehicle that meets any of the following conditions: (1) The total height of the vehicle and cargo exceeds 4 meters from the ground. (2) The total width of the vehicle and cargo exceeds 2.55 meters. (3) The total length of the vehicle and cargo exceeds 18.1 meters. (4) For a 4-axle truck, the total mass of the vehicle and cargo exceeds 31,000 kilograms; for a 4-axle articulated vehicle, the total mass of the vehicle and cargo exceeds 36,000 kilograms. 2. Precautions: Large transport vehicles that have been approved for operation must temporarily stop on the highway. In addition to complying with relevant road traffic safety regulations, they must also set up warning signs around the vehicle and take corresponding safety precautions. If a prolonged stop is required or in case of severe weather, the vehicle should leave the highway and park in a nearby safe area.
6
2
Share

How many more years can National IV cars be driven?

Currently, there is no explicit national regulation on the mandatory scrapping time for National IV vehicles in China. As long as they can pass the annual inspection at local motor vehicle inspection stations, they can continue to be driven. Below is relevant information about National IV vehicles: 1. Introduction: According to the Ministry of Environmental Protection's plan, China will enforce the National VI emission standards for light-duty vehicles starting from July 1, 2020. Therefore, the remaining time for older National III and National IV vehicles is uncertain. Notably, Shenzhen issued a notice on March 29, announcing that it would implement the National VI emission standards on July 1, 2018, a full two years ahead of the national schedule. 2. Considerations: With the arrival of National VI standards, the usability of National IV vehicles will not be immediately threatened in the short term. Given the current volatile policy environment, if considering whether National IV vehicles are worth purchasing, it's important to note that while they won't be phased out immediately, the advent of National VI will undoubtedly impact their resale value. Therefore, cautious purchasing is advised.
11
3
Share

Can 195 tires be replaced with 205 tires on a car?

The 195 tires on a car can be replaced with 205 tires. Below is relevant information about car tires: 1. Introduction: If you decide to replace them, it is recommended to change the rims as well. Generally, 195 tires are paired with 15-inch rims, while 205 tires are paired with 16-inch rims. Although 15-inch rims can accommodate up to 205 tires, it is still advisable to use 16-inch rims. The numbers 195 and 205 represent the cross-sectional width of the tires. 195 indicates that the tire width is 195 millimeters, and 205 indicates a tire width of 205 millimeters. 2. Considerations: If the rim width reaches 6J, technically, you can switch to 205 tires. However, according to China's current traffic laws, tires must match the factory certificate; otherwise, it is considered illegal modification. Currently, it is not recommended to change tire specifications. If you insist on changing them, be prepared to face potential insurance claim rejections and keep a set of compliant tires for vehicle inspection purposes.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.