Is it necessary to press the accelerator in Subject 2?

Why does the car still pull to one side after wheel alignment?

After performing a four-wheel alignment, the car may still pull to one side due to the following reasons: 1. The vehicle's drivability is affected. 2. Damage to the chassis and suspension caused by an accident. 3. Abnormal tire wear. 4. Components of the axle and suspension have been removed. Additional information: 1. The installation of the steering wheels, steering knuckles, and front axle in a car has a certain relative position. This installation with a specific relative position is called steering wheel alignment, also known as front wheel alignment. 2. For the two rear wheels, there is also a relative position in their installation with the rear axle, known as rear wheel alignment. 3. Four-wheel alignment is based on the parameters of the vehicle's four wheels, adjusted to ensure good driving performance and a certain level of reliability.

12

3

Share

When will the 2020 Honda Fit be launched?

The 2020 Honda Fit is scheduled to be launched in Japan in February 2020, while its release in China is expected to be delayed by about two months. Here is some information about the 2020 Honda Fit: 1. The fourth-generation 2020 Fit features a more rounded and full-bodied design, with softer lines compared to the previous model, giving it a more approachable look. 2. This gentler design might not appeal to those who prefer aggressive styling; the hybrid version of the Fit also comes with a closed-off front grille, significantly enhancing the front-end recognition.

20

1

Share

What are the techniques for pressing the accelerator with a CVT transmission?

CVT transmission accelerator techniques mainly include three aspects: during starting, shifting, and overtaking: 1. During starting: When starting the car, press the accelerator gently, about one-quarter of the total accelerator travel, to prevent sudden jerking caused by excessive throttle, which could lead to an accident. 2. During shifting: If you want to upshift by using the accelerator, you can gently release the accelerator when the car's RPM reaches around 2000, which will prompt the car's computer system to upshift by default. 3. During overtaking: Overtaking requires the car to have relatively high torque. If the car is in a high gear with low RPM, you can first downshift using manual mode and then accelerate to overtake.

8

5

Share

What is the typical lifespan of engine mounts?

With proper driving, engine mounts can last a lifetime and generally can be used for more than five years. Additional information is as follows: 1. Engine mounts, commonly known as engine mount rubbers, are wear parts with a designed lifespan typically ranging from 60,000 to 80,000 kilometers. Their main functions include: securing the engine to the frame; the rubber on the mount serves to dampen vibrations, preventing engine vibrations from being transmitted to the vehicle interior. 2. After engine mounts are damaged, the symptoms in the car are not particularly distinctive and can easily be overlooked. The main symptoms are shaking and vibrations, but there are many reasons why a car might shake. Checking and replacing engine mount rubbers is relatively straightforward.

4

2

Share

Is a family sedan approximately 1000 kilograms in weight?

A family sedan weighing approximately 1000 kilograms is incorrect. The typical weight of an ordinary sedan is around 1400kg to 1500kg, while mid-to-high-end cars range from 1400kg to 1600kg, or even between 1800kg to 2000kg. Below are the relevant details: Curb Weight: Curb weight refers to the self-weight of a vehicle, which is the weight of the car under normal driving conditions (with 90% fuel in the tank) plus additional equipment (spare tire, tools, etc.). Curb weight is also an important factor affecting a car's fuel consumption, as there is a proportional relationship between fuel consumption and curb weight—meaning heavier cars consume more fuel. Gross Vehicle Weight: Gross vehicle weight, also known as total weight, includes the vehicle's self-weight, passengers, and cargo. If the car is used for transporting goods, the difference between the total weight and the curb weight must be considered.

7

4

Share

How Early Can You Go for a Vehicle Inspection?

Vehicle inspections can be conducted up to three months in advance, and must not be overdue. Before the annual inspection, all traffic violations associated with the vehicle must be resolved. Precautions for vehicle annual inspections: Wash the car before the inspection to ensure the exterior is clean. It is also advisable to clean the engine area under the hood so that the inspector can clearly see the engine number and chassis number. Stickers on the windshield may obstruct the driver's view, while large decorative stickers or eye-catching club logos on the body are considered unauthorized modifications to the vehicle's appearance and will result in inspection failure. Specific inspection items: Check whether the engine, chassis, body, and related equipment are clean, complete, and functional; whether the paint is uniform and aesthetically pleasing; whether major components have been replaced and match the initial inspection records. Verify the vehicle's braking performance, steering control, lighting, exhaust, and other safety features comply with the technical requirements for safe vehicle operation. Confirm whether the vehicle has been modified, altered, or transformed, and whether the current condition matches the records in the driving license, license plate, and vehicle file, including any changes or required approval procedures. Inspect the license plate, driving license, and enlarged license plate markings on the vehicle for damage, tampering, or unclear writing, and determine if replacement is necessary.

3

2

Share

Is it necessary to press the accelerator in Subject 2?

Why does the car still pull to one side after wheel alignment?

When will the 2020 Honda Fit be launched?

What are the techniques for pressing the accelerator with a CVT transmission?

What is the typical lifespan of engine mounts?

Is a family sedan approximately 1000 kilograms in weight?

How Early Can You Go for a Vehicle Inspection?

How many days does it take to check vehicle violation information?

Where can the vehicle identification number (VIN) be found on a car?

Will Manually Closing an Electric Trunk Cause Damage?

Introduction to Automotive Final Assembly Line?