Is it necessary to personally handle the cancellation of a motorcycle license?

Press Once or Hold for One-Key Start?

One-key start is pressed once. The one-key start can be modified at the original car key lock position or installed as an independent panel. Its purpose is to allow the use of traditional mechanical starting methods in case the one-key start function fails. The one-key start intelligent system typically includes features such as automatic lock/unlock, automatic window closing, automatic anti-theft, one-key start/stop, and trunk opening. The method for one-key start is: 1. After the driver sits in the driver's seat, press the start button, at which point the ACC light will turn on. Press it again for the vehicle to perform a self-check; 2. Depress the brake and press the one-key start button to ignite and start the engine.

16

2

Share

Do I need to turn on the width indicator lights when driving at night?

When driving at night, it is necessary to turn on the width indicator lights along with the headlights. The width indicator lights are used to indicate the width of the vehicle and are considered standard lighting. The use of lights during nighttime driving should be adjusted based on the situation: 1. When driving at speeds below 30 km/h, low beams should be used. Under normal conditions, these lights can illuminate the road up to 30 meters ahead. 2. When approaching an intersection, reduce speed 50 to 100 meters before the intersection, switch from high beams to low beams, and activate the turn signal to indicate the direction of travel. 3. When an oncoming vehicle is within 150 meters, switch from high beams to low beams to avoid obstructing the other driver's vision. If the other driver does not switch to low beams, immediately reduce speed and alternately flash high and low beams to signal them. 4. Drive with low beams on well-lit roads.

11

4

Share

What is included in a 10,000-kilometer maintenance for a new car?

New car 10,000-kilometer maintenance includes: 1. Engine oil and oil filter replacement; 2. Check if the oil filter element, air filter element, fuel filter element, cabin air filter element, and transmission oil filter element need replacement; 3. Top up windshield washer fluid, coolant, and air conditioning refrigerant if insufficient; 4. Inspect drive belts for wear; 5. Clean throttle body and cylinder carbon deposits; 6. Check chassis for damage; 7. Inspect body and tires. The benefits of car maintenance are: 1. Ensures optimal vehicle performance; 2. Improves driving safety; 3. Reduces engine noise; 4. Extends vehicle lifespan.

17

5

Share

What does it mean when the ABS warning light is on?

When the ABS warning light is on, it indicates a malfunction in the vehicle's Anti-lock Braking System. The possible causes include: 1. Faulty ABS wheel speed sensor; 2. ABS wiring connection issues; 3. ABS control unit programming error; 4. ABS master cylinder failure. The working principle of ABS is: During emergency braking, the highly sensitive wheel speed sensors installed on each wheel detect wheel lock-up. The computer then controls the pressure regulator to release pressure from the wheel's brake caliper, preventing wheel lock-up. The functions of the ABS system are: 1. To prevent loss of vehicle control, increase braking distance, and improve vehicle safety; 2. To enhance the overall braking performance of the vehicle; 3. To prevent wheel lock-up during braking; 4. To ensure the driver maintains steering control during braking and prevent rear axle skidding.

12

2

Share

What car is the cross emblem?

The cross emblem represents Chevrolet, an automobile brand under General Motors in the United States. Chevrolet's vehicle lineup includes models such as the Chevrolet Equinox, Chevrolet Cavalier, Chevrolet Orlando, Chevrolet Blazer, and Chevrolet Cruze. Taking the 2021 Chevrolet Equinox as an example, it is a midsize SUV with body dimensions of 4646mm in length, 1843mm in width, 1684mm in height, and a wheelbase of 2725mm. The 2021 Chevrolet Equinox is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum torque of 250Nm, and a maximum power of 124kW, paired with a 6-speed automatic transmission.

3

1

Share

What is the correct sequence for parking a manual transmission car?

The correct sequence for parking a manual transmission car is: 1. Turn on the right or left turn signal; 2. Gently press the brake to reduce speed, observe the right rearview mirror, and drive to the right; 3. When the speed is relatively low, press the clutch pedal, and pay attention to the surrounding distance when parking; 4. After the car comes to a complete stop, shift the gear to neutral, turn off the turn signal, engage the handbrake, and turn off the engine. The steps for starting a manual transmission car are: 1. Press the clutch pedal all the way down; 2. Move the gear lever to engage the first gear; 3. Lightly press the turn signal lever downward to activate the left turn signal, indicating to the front and rear of the vehicle; 4. Press the horn button to alert pedestrians in front of the vehicle that you are about to start; 5. Release the vehicle's handbrake; 6. Lift the left foot until the clutch is in a semi-engaged state, and the vehicle begins to vibrate slightly; 7. The vehicle starts to move, release the clutch and gently press the accelerator.

18

0

Share

Is it necessary to personally handle the cancellation of a motorcycle license?

Press Once or Hold for One-Key Start?

Do I need to turn on the width indicator lights when driving at night?

What is included in a 10,000-kilometer maintenance for a new car?

What does it mean when the ABS warning light is on?

What car is the cross emblem?

What is the correct sequence for parking a manual transmission car?

Can the original halogen headlights be directly replaced with LED lights?

How far in advance should I schedule the Subject 3 driving test?

How to Handle the Issue of the Instrument Panel Not Receiving EECU Messages?

Is it mandatory to service a car every six months?