Is it necessary to perform glaze sealing, coating, or crystal plating treatment on a new car?

2 Answers
DiColeman
07/29/25 7:35am
New cars do not require glaze sealing, coating, or crystal plating treatments within the first six months of purchase. The need for waxing or glaze sealing can be determined based on usage conditions, age, and the oxidation level of the car paint. If waxing or glaze sealing is required, minimize the use of polishing machines on the car paint. Below is information about glaze sealing, coating, and crystal plating: 1. Glaze Sealing: A specialized vibrating polishing machine is used to press glaze into the car paint, forming a mesh-like protective film. 2. Coating: Based on traditional polishing techniques, a spray gun is used to evenly apply a coating polymer onto the car paint, forming a protective film on the surface. High-quality coating products can significantly enhance the gloss of the paint, improving its durability and anti-aging properties. 3. Crystal Plating: A layer of strong protective crystals and a UV filter is formed on the car's surface, enhancing the brightness and hardness of the paint, preventing scratches, and protecting against harmful substances such as UV rays, acid rain, salt, asphalt, overspray, insect spots, sand, and bird droppings.
Was this review help?
15
3
Share
OEdward
08/12/25 10:52am
As an average car owner who has driven for several years, I feel that new cars don't necessarily need immediate paint sealing or coating treatments. The factory-applied clear coat on new car paint acts like a protective film, and regular washing with waxing can maintain it well for quite some time. If you usually park indoors with minimal exposure to wind and rain, skipping these treatments to save money won't cause major issues. However, if your car is frequently parked outdoors under sun exposure or rain, getting a ceramic coating can indeed protect against UV oxidation and minor scratches, extending the paint's lifespan. The key is not to be rushed by sales pitches—wait a few months to observe the paint's condition, such as susceptibility to staining or water spots, before deciding. Base your decision on budget: ceramic coatings are more expensive but longer-lasting, while economical paint protection films suffice for daily protection.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What Cars Are Suitable for 0W20 Engine Oil?

0W20 engine oil is suitable for some Japanese cars equipped with naturally aspirated engines. Generally, only Japanese cars use 0W20 oil. 0W20 engine oil is suitable for engines with weak power, low RPM, and low operating temperatures. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Ford Focus is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the filler cap on the engine valve cover, typically filling about three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check if the oil level is within the standard range.
6
5
Share

What is the problem with the Audi A8 air conditioner not cooling?

Here are the reasons why the air conditioner is not cooling: 1. Insufficient or too little refrigerant: When the air conditioner is running normally, if you observe continuous and slow bubbles in the sight glass above the dryer, it indicates insufficient refrigerant. If there are obvious bubble flips, it means the refrigerant is severely insufficient. 2. Too much refrigerant: Excessive refrigerant can also cause the air conditioner to not cool. This is because the proportion of refrigerant in the air conditioning system has specific requirements. If the proportion is too high, it will affect heat dissipation. Similarly, adding too much cooling oil during maintenance can also reduce the heat dissipation of the refrigeration system. 3. Loose drive belt of the car air conditioner compressor: Car cooling relies on refrigerant, and the transmission of refrigerant depends on the air conditioner compressor. The drive belt is an important moving part that drives the compressor. If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency, decreased compressor speed, and reduced delivery of compressed refrigerant, resulting in the car air conditioner not cooling.
15
1
Share

What causes the automatic start-stop dashboard indicator light to illuminate in the Honda Vezel?

Possible faults in the electronic control components of the vehicle's electrical system may be stored as fault codes. When the computer detects these fault codes, it can cause all warning lights to illuminate. Below are relevant details: 1. Exterior design: The Honda Vezel features a winged front grille design with a mysterious and elegant black theme, integrating the grille and headlights into a unified element. The LED headlights adopt a dual-lamp design, combined with curved LED daytime running lights. 2. Powertrain: The 1.8L Vezel model is equipped with a high-efficiency 1.8L i-VTEC engine that incorporates technologies for reduced fuel consumption, lightweight construction, and low friction. This achieves a perfect balance between robust power performance under medium-to-high loads and excellent fuel economy under light loads. Paired with a new-generation CVT transmission, the minimum combined cycle fuel consumption is only 6.5L/100km.
4
1
Share

How much does the Regal weigh?

The Buick Regal has a body weight of 1430~1535 kg. Below is an introduction to the Regal: Design: The all-new Regal adopts Buick's latest sculptural aesthetic design language. The larger-sized winged chrome grille extends horizontally from the centerline, with the shield-shaped upper grille complementing the trapezoidal lower grille, combined with the air curtain design on both sides, giving the front face a wide-body, low-profile sporty presence. The chrome grille features a parametric structural aesthetic design, with chrome cells arranged in a matrix pattern, showcasing exquisite craftsmanship while highlighting the beauty of the three-dimensional structure. Interior: The all-new Buick Regal has a wheelbase of 2829mm, and with the optimized front and rear track design, it achieves dual improvements in longitudinal and lateral space. The new car also uses high-quality materials and exquisite craftsmanship to give the interior an outstanding texture. Large areas of soft materials cover the upper leg positions, combined with hand-stitched French double-stitching, making the cabin atmosphere both refined and comfortable.
10
2
Share

What is the wading depth of a Cadillac?

Cadillac's wading depth is 5m. Here are the handling methods for a water-soaked car: 1. Slow down or stop: When encountering uncertain water depth, brake immediately without hesitation while driving. Stop to observe the waterline when trucks or large vehicles pass by to determine if you can continue driving. 2. Maintain slow speed without stopping: If the vehicle has already entered a deep water section, stay calm, keep the throttle steady to control speed (avoid excessive speed), try not to shift gears or stop during this process, and exit the area as quickly as possible. 3. Post-disaster precautions: Even if the vehicle doesn't appear severely damaged, it's essential to have it inspected at a repair shop to prevent hidden hazards caused by residual moisture. After the weather clears, open the doors and place the car under sunlight with a fan blowing nearby to effectively accelerate the drying process. Airflow can also effectively inhibit mold growth.
6
5
Share

How often should the brake fluid of Wuling Hongguang be changed?

Generally, the brake fluid should be completely replaced every two years or 40,000 kilometers. Although the replacement cycle of brake fluid is relatively long, if it is not replaced in time, the brake fluid will become turbid, the boiling point will decrease, and the effect will deteriorate. Over time, it will damage the entire braking system and even lead to brake failure. The introduction of brake fluid is as follows: 1. Introduction one: Brake fluid, also called brake oil or hydraulic brake fluid, its English name is Brake Fluid, which is an indispensable part of the braking system. In the braking system, it acts as a medium for force transmission. Because the liquid cannot be compressed, the pressure output from the master cylinder will be directly transmitted to the sub-cylinder through the brake fluid. 2. Introduction two: Hydraulic brake fluid is a functional liquid used in the hydraulic braking system to transmit pressure to stop the rotation of the wheels. Its working pressure is generally 2MPa, and the high pressure can reach 4~5MPa. All liquids have the characteristic of being incompressible. In a sealed container or a pipeline filled with liquid, when the liquid is under pressure, the pressure will be quickly and uniformly transmitted to all parts of the liquid.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.