Is it necessary to install window chrome trim?

1 Answers
LaTeagan
07/30/25 6:37am
Window chrome trim is primarily decorative and offers little practical functionality. As for the potential hazards of installing window chrome trim, they can be avoided by purchasing high-quality products and ensuring proper installation. Purchase vehicle-specific products: When installing window chrome trim, it's essential to buy products specifically designed for your vehicle model and opt for high-quality items. Low-quality products may see their chrome plating peel off over time, affecting aesthetics. Additionally, high-quality adhesive must be used when applying the trim; otherwise, the trim may fall off during vehicle use. Proper installation: Correct installation procedures are crucial when adding window chrome trim. Improper installation can damage the window seals and may lead to wind noise issues. This occurs when the installation steps aren't meticulous enough, failing to secure the trim properly, or when removing the trim before the heating process is complete. The adhesive on chrome trim is quite strong, and forcibly peeling it off can easily damage the original seals.
Was this review help?
5
5
Share
More Forum Discussions

What tires does the Haval H9 use?

Haval H9 uses Cooper Discoverer HTS tires with the specification of 265/60R18, commonly found on urban SUV models. The currently available Haval H9 models are the 2020 edition, all compliant with the China VI emission standards. They are equipped with a 2.0T engine, model GW4C20B, with an actual displacement of 1967ml, featuring 4 cylinders in an L arrangement and turbocharged intake. The 2.0T engine of the Haval H9 has four valves per cylinder, a DOHC valvetrain, with maximum power at 5500 RPM and maximum torque at 3600 RPM. The engine block is made of cast iron and the cylinder head of aluminum alloy, with direct fuel injection. The dimensions of the currently available Haval H9 models are 4856mm in length, 1926mm in width, and 1900mm in height, with a wheelbase of 2800mm.
2
1
Share

What level is the Kumho Tire HS81?

Kumho Tire HS81 is a mid-to-high level tire. Kumho Tire: Kumho Tire ranks fourth in overall rankings, but when price is also taken into consideration, it undoubtedly becomes the best choice in terms of cost-effectiveness. Since its launch in August 2014, the Kumho ECSTA HS81 has gained a strong foothold in the competitive tire market with its innovative technology and precise positioning, becoming a powerful tool for Kumho Tire to capture market share. Kumho Tire Design: As a customized tire highly suitable for luxury European cars, the ECSTA HS81 features an asymmetric functional tread design with wide shoulder tread blocks and convex center tread blocks, ensuring optimal tread design for handling response performance. The high-strength bead rim rubber design of the ECSTA HS81 further enhances rim protection, optimizes the force distribution at the bead area, significantly improves high-speed stability, and perfectly showcases the vehicle's sporty performance.
11
3
Share

What type of four-wheel drive system does the Haval H9 use?

Haval H9 adopts an on-demand four-wheel drive system. The on-demand four-wheel drive only switches to four-wheel drive when necessary, while remaining a two-wheel drive system under other circumstances. The system automatically switches between two-wheel drive and four-wheel drive modes based on the vehicle's driving conditions, without requiring manual operation. The Haval H9 is a mid-to-large-sized SUV, equipped with a 2.0-liter turbocharged engine across the entire lineup. It delivers a maximum power of 165 kW and a peak torque of 385 Nm, with the maximum power achieved at 5,500 rpm and the peak torque available between 1,800 to 3,600 rpm. The engine features dual VVT technology and direct fuel injection, utilizing an aluminum cylinder head and cast iron cylinder block, paired with an 8-speed automatic transmission.
11
5
Share

Should You Use High Beam or Low Beam When Driving at Night?

Whether to use high beam or low beam when driving at night depends on the driving conditions. When to use high beam: After dark, turn on the headlights. If you need to overtake, when you are 80 meters away from the vehicle in front, turn on the turn signal and turn off the high beam. When you are 30-50 meters away from the vehicle you want to overtake, flash the high beam a few times to signal your intention to overtake. After overtaking the vehicle, turn on the high beam again. When driving at night with no vehicles traveling in the same direction ahead, turn on the high beam. Precautions for using headlights: When meeting or overtaking vehicles at night, always remember to turn off the high beam, as keeping it on can easily irritate the other driver and cause visual fatigue. Flashing the headlights when overtaking can better attract the attention of the driver being overtaken.
15
5
Share

What type of engine oil is used in the Haval H9?

Haval H9 uses 5W40 engine oil. As long as it is 5W40 oil and guaranteed to be genuine, it can be used. The key points in using engine oil are to ensure the correct specification and that it is authentic. Using counterfeit or substandard engine oil not only fails to protect the car's engine but can also damage it. There are many manufacturers selling engine oil, and the quality varies greatly, so it's important to be cautious when purchasing. Opting for well-known brands is more reliable. The specification of engine oil to use should always follow the manufacturer's recommendation. The currently available Haval H9 models are the 2020 version, with a total of 6 variants, all meeting the China 6 emission standards. In terms of power, they are equipped with a 2.0-liter inline 4-cylinder turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 165 kW and a maximum torque of 385 Nm.
1
3
Share

Should PDI Inspection Be Conducted in Front of the Customer?

There is no mandatory requirement for PDI inspection to be conducted in front of the customer. Below is relevant knowledge about PDI inspection: Scope of PDI Inspection: The PDI inspection covers a wide range of items, such as whether the battery charges and discharges normally, whether the key memory function is matched, whether the comfort system is activated, whether the instrument light functions are set to the factory requirements, etc. Consequences of Not Conducting PDI: A new car that has not undergone PDI inspection will continue to operate in transport mode. In this mode, the car can only drive simply, and many systems are not activated. Forced use may result in incomplete functions and even serious damage to the vehicle, posing significant risks to both the vehicle and the driver's safety. Under normal circumstances, all vehicles should undergo regular maintenance during use.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.