Is it necessary to install car door shock-absorbing pads?

1 Answers
SanBrayden
07/30/25 10:01am
It is necessary to install car door shock-absorbing pads. The functions and materials of shock-absorbing pads are introduced as follows: Functions of shock-absorbing pads: They prevent the shock absorber from coming into contact with the car body. When the car turns and the center of gravity shifts to one side, causing the car body to tilt and compress the springs, the pads provide support, thereby reducing the car's body roll. Materials used for shock-absorbing pads: The pads are made of paper, rubber sheets, or copper sheets, serving as sealing materials placed between two surfaces to enhance sealing. They are sealing components set between static sealing surfaces to prevent fluid leakage. They are installed on the car body by adhesion, and the adhesive materials are mostly very mild, so they will not cause damage to the car body surface.
Was this review help?
5
5
Share
More Forum Discussions

What does the SVS light on the dashboard mean?

SVS stands for the engine fault indicator light. Reasons for the engine fault light to illuminate: 1. Poor engine combustion is the primary cause of the engine fault light coming on; In automotive design, to ensure the engine operates in good condition and maintains a normal service life, an oxygen sensor is installed to monitor the engine's combustion state. Poor combustion not only pollutes the environment but also leads to fuel waste and excessive engine wear. 2. In real-life situations: Some gas stations may not fully comply with standards to provide fuel suitable for high-performance engines, resulting in frequent occurrences of the engine fault light illuminating. 3. Over time, carbon deposits inevitably accumulate inside the engine. These deposits can alter the engine's design parameters and, due to their unstable nature, retain heat. The retained heat can cause uncontrolled ignition, leading to engine knocking. In such cases, the engine fault light will also illuminate.
5
5
Share

Does the Haval H6 have 4WD?

Haval H6 has 4WD, which means the vehicle maintains a four-wheel-drive form throughout the entire driving process. Taking the 2021 Haval H6 as an example, its body dimensions are: length 4615mm, width 1860mm, height 1720mm, wheelbase 2680mm, minimum ground clearance 182mm, and body weight 1675kg. In terms of suspension, the 2021 Haval H6 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. For power, the 2021 Haval H6 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, maximum torque of 210Nm, and maximum power of 110kW, paired with a 6-speed manual transmission.
11
1
Share

What are the differences between the BMW 520 and BMW 525?

From the perspective of body dimensions: The BMW 520 has a length, width, and height of 5055mm, 1860mm, and 1491mm respectively; the BMW 525 measures 5106mm in length, 1868mm in width, and 1500mm in height. In terms of wheelbase: The BMW 520 has a wheelbase of 3108mm, while the BMW 525's wheelbase is 3105mm. Regarding tire specifications: The BMW 520 uses 225/55R17 tires for both front and rear, whereas the BMW 525 is equipped with 245/45R18 tires. BMW, whose full Chinese name is Bavarian Motor Works, is a German luxury car brand headquartered in Munich, Bavaria, Germany.
7
1
Share

What is the 2021 Levin car connectivity and screen mirroring function?

2021 Levin car connectivity and screen mirroring function refers to the car connectivity feature, which allows the smartphone screen to be projected onto the vehicle's display. Through this display, users can operate functions such as navigation, videos, music, and games from their phones. Below is an introduction to the 2021 Levin: 1. Advantages: The Levin is built based on Toyota's A-class car model from the American market. The sharp-looking American version has been a best-seller in North America for many years, consistently topping the sales charts in the A-class car market. The Levin inherits the championship genes of this model, boasting a high-quality foundation. 2. Powertrain: For the gasoline version, it continues to use the 1.2T+CVT powertrain combination, delivering a maximum power of 85kW and a peak torque of 185N·m.
19
5
Share

Can water be added if the coolant is low?

It is not advisable to add water when the car engine coolant is insufficient. Here are the reasons why water should not be added when the car engine coolant is insufficient: 1. Water has a low boiling point and is prone to boiling over, resulting in poor cooling performance. 2. Water has a high freezing point and is prone to freezing, which can affect the car's operation if the engine or radiator freezes. 3. Water contains impurities and ions, which can easily form scale and cause blockages. Here is some relevant information about coolant: 1. Coolant has functions such as antifreeze, cooling, anti-corrosion, and anti-scaling. 2. Coolant contains water, but this water is soft water, which is distilled water that has undergone deionization and softening treatment.
9
5
Share

Where to Check the Vehicle's National Emission Standard?

Places to check the vehicle's national emission standard include: 1. Look at the back of the car's environmental protection compliance label; 2. Check the page where the vehicle certification number starts; 3. Take the vehicle registration certificate to the local vehicle management office for verification. Emission standards refer to the levels of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulates, and carbon smoke emitted from vehicle exhaust. Vehicle emission standards are established to prevent environmental pollution caused by exhaust from compression-ignition and gas-fueled spark-ignition engines, protect the ecological environment, and safeguard human health. Vehicle emission standards are categorized into: 1. Vehicles with a total mass of ≤3.5t equipped with spark-ignition or compression-ignition engines; 2. Vehicles with a total mass >3.5t equipped with spark-ignition engines; 3. Vehicles with a total mass >3.5t equipped with compression-ignition engines.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.