···
Log in / Register

Is it necessary to install an underbody guard for cars?

1 Answers
VonThomas
09/03/25 6:48am

Of course it is necessary to install one. During our daily driving, road conditions are not always consistent. The road that was perfectly fine on the way to work might be under construction or difficult to see clearly at night when returning home. The underbody guard is a protective panel for the car's engine. Its primary design purpose is to prevent mud from encasing the engine, which could lead to poor heat dissipation. Additionally, it helps avoid engine damage caused by impacts from uneven road surfaces during driving, thereby preventing car breakdowns due to external factors damaging the engine. It also protects the engine from being struck by gravel and hard objects kicked up by the tires while driving. While these impacts may not affect the engine immediately, prolonged exposure can cause certain damage. The guard effectively maintains the cleanliness of the engine compartment surface, preventing water, mud, and especially ground dirt from entering the engine bay. Furthermore, it shields the engine from scratches and impacts caused by uneven roads and hard objects.

Was this review help?
14
2
Share
More Forum Discussions

How to Reset the Wrench Light on Lavida?

The method to reset the wrench light on Lavida is: 1. Turn off the engine, rotate the odometer reset handle on the dashboard counterclockwise by one notch and hold it; 2. Turn the car key to start the engine, then release the adjustment handle after starting to let it automatically reset. Taking the 2021 Lavida as an example, it belongs to the compact car category with body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. The 2021 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum torque of 250Nm, and maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
19
0
Share

Should You Shift to P Gear or Pull the Handbrake First When Parking an Automatic Transmission Car?

When parking an automatic transmission car, you should first pull the handbrake to achieve the braking effect of the braking system, and then shift to P gear to lock the transmission shaft, which is safer. The correct method for parking an automatic transmission car is: 1. Step on the brake to slow down and stop; 2. After coming to a complete stop, shift to N gear; 3. Tighten the handbrake; 4. Release the foot brake and confirm the vehicle is stationary; 5. Step on the foot brake again and shift to P gear; 6. Turn off the engine. The correct method for starting an automatic transmission car is: 1. Connect the power and then start the car; 2. After ignition, step on the brake, shift to D gear, release the handbrake, and start by slightly pressing the accelerator; 3. After starting, accelerate appropriately according to road conditions.
11
3
Share

How to Judge Distance by Looking at the Rearview Mirror in a Car?

The method to judge distance by looking at the rearview mirror in a car is: 1. Use the center of the rearview mirror as a reference line. When the car body is on the outer side of the reference line and the rear vehicle cannot be fully seen, the distance is 5m; 2. When the rear vehicle can completely appear in the rearview mirror and the car body presses on the reference line, the distance is 10m. The method to adjust the rearview mirror is: 1. Left rearview mirror: Place the horizontal line at the midline position of the rearview mirror, then adjust the edge of the car body to occupy a quarter of the mirror image; 2. Right rearview mirror: Place the horizontal line at two-thirds of the rearview mirror, then adjust the edge of the car body to occupy a quarter of the mirror image.
11
0
Share

What is the difference between 1.5L and 2.0L cars?

1.5L and 2.0L cars differ in the following aspects: 1. Different displacement: A 1.5L car refers to a naturally aspirated engine with a displacement of 1.5 liters; a 2.0L car refers to a naturally aspirated engine with a displacement of 2.0 liters. 2. Different power: The 1.5L engine has lower horsepower and power output, making it less suitable for long-distance hauling; the 2.0L car has relatively higher power and stronger performance. Both 1.5L and 2.0L cars are equipped with naturally aspirated engines, which have the following characteristics: 1. The engine is well-developed with a simple structure; 2. The car idles smoothly, delivers smooth power output, and has low noise during cold starts; 3. They have lenient requirements for oil and fuel quality.
2
3
Share

What is the 0-100 km/h acceleration time of the Qiantu K50?

Qiantu K50's 0-100 km/h acceleration time is 4.6 seconds. Additional information is as follows: Factors affecting 0-100 km/h acceleration time: There are many factors that affect a car's 0-100 km/h acceleration time, such as tires, temperature, road surface, wind direction, etc. If certain conditions are not favorable, the tested 0-100 km/h acceleration result may be relatively poor. Basic introduction of Qiantu K50: The Qiantu K50 is the first pure electric sports car launched by Qiantu Motors under CH-AUTO Technology. The Qiantu K50 has a length, width, and height of 4634mm, 2069mm, and 1253mm respectively, with a wheelbase of 2650mm. It is powered by two electric motors, one on the front axle and one on the rear axle, achieving four-wheel drive.
1
1
Share

What is the maximum displacement of the Audi Q5?

The maximum displacement of the Audi Q5 is 2.0L. The Audi Q5 is a mid-size SUV. Taking the 2020 Audi Q5 as an example, its body dimensions are: length 4753mm, width 1893mm, height 1659mm, wheelbase 2908mm, fuel tank capacity 73L, and curb weight 1855kg. The 2020 Audi Q5 features a five-link independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.