Is it necessary to install an engine underbody guard?

1 Answers
MaggieAnn
07/30/25 10:27am
It is necessary to install an engine underbody guard. During driving, vehicles can kick up mud, dust, stones, and dirty water, which may flow through various parts of the underbody. The engine guard can prevent these foreign objects from entering the engine compartment, ensuring the smooth operation of all components and maintaining cleanliness in the engine compartment to some extent. Relevant information about the engine underbody guard is as follows: 1. The engine guard is a protective device for the engine, equivalent to adding a protective layer to the car's underbody. 2. It can reduce contact and friction between the vehicle's underbody and the ground, extending the engine's service life. 3. In rainy or snowy weather, the engine guard can also effectively reduce corrosion of the engine by rain and snow.
Was this review help?
18
2
Share
More Forum Discussions

What engine is used in the Porsche Panamera?

Porsche Panamera is equipped with two types of engines: a 2.9-liter 6-cylinder twin-turbocharged engine and a 4.0-liter 8-cylinder twin-turbocharged engine. Below are the extended details about the Porsche Panamera: 1. The 2.9-liter 6-cylinder twin-turbocharged engine comes in two versions with different power outputs: the high-power version delivers a maximum horsepower of 440 HP, while the low-power version offers 330 HP. 2. The 4.0-liter 8-cylinder twin-turbocharged engine also has two versions: the high-power version produces a maximum horsepower of 550 HP, and the low-power version generates 460 HP. 3. The entire lineup features configurations such as air suspension, rear-axle steering, and an electronic 4D chassis system.
11
2
Share

Where are the engine and transmission of the Haval H7 produced?

Haval H7's engine is produced by Great Wall Motors itself. The transmission is a 6-speed dual-clutch transmission imported from Getrag, with the model number 6DCT451. Transmission Introduction: A device that changes the speed ratio and direction of motion. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Transmission Definition: The transmission is a gearbox that changes the transmission ratio and direction of motion. It is located between the clutch and the central drive. Its main functions are: changing the driving force and speed of the vehicle (shifting) without altering the engine speed and torque; enabling the vehicle to move in reverse (reversing); and allowing the engine to idle without stalling (neutral). Based on the transmission type, gear transmissions can be divided into three types: two-shaft, three-shaft, and composite.
12
2
Share

What's the situation when the Volkswagen Golf suddenly can't lock the doors?

The reasons why the Volkswagen Golf suddenly can't lock the doors are as follows: Remote lock failure: If you are using the remote key to lock the doors, it is very likely that the remote lock is malfunctioning or the antenna of the car's remote transmitter is aging, causing the remote key to not work. In this case, you can use the spare mechanical key to lock the doors. Magnetic field around the car: Another situation is that there is strong magnetic field signal interference around the car. Since the smart key uses low-intensity radio waves, it cannot function properly under magnetic interference. Door jammer: If the car frequently fails to lock remotely in a certain place, the owner needs to be wary of a door jammer. Some criminals use a radio signal blocker that can emit electromagnetic waves of the same frequency as the car's locking signal, thereby blocking the electronic code of the car's central lock and causing it to temporarily malfunction.
8
1
Share

What does adjustable headlight height mean?

Adjustable headlight height refers to the ability to adjust the height of the headlights to obtain the optimal illumination distance, thereby avoiding potential hazards. This is a safety lighting feature that typically uses an electric motor to adjust the headlight height electronically, ensuring the best illumination distance and preventing dangers while driving. Below is an explanation of how adjustable headlight height works: 1. Based on the adjustment method, it is generally divided into manual and automatic types. Manual adjustment: The driver adjusts the headlight angle by turning a dial inside the car according to road conditions, such as setting a low angle when driving uphill or a high angle when driving downhill. Automatic adjustment: Cars equipped with automatic headlight adjustment feature several sensors on the body that detect the vehicle's dynamic balance and automatically adjust the lighting angle based on pre-set programs. 2. Adjustable headlight height usually comes with a manual adjustment knob inside the car, allowing the driver to freely adjust the headlight height. However, some high-end luxury cars feature automatic leveling adjustment, where the vehicle automatically adjusts the headlight height based on sensors without the need for manual controls.
14
0
Share

Is BYD a State-Owned Enterprise or a Private Enterprise?

BYD is a private enterprise. Here is relevant information about BYD: 1. Logo Meaning: In 2007, BYD replaced its old blue-sky-and-white-cloud logo with a new one consisting of only three letters and an ellipse. BYD stands for "Build Your Dreams," meaning to achieve dreams. 2. After-Sales Service: As a rising star among independent brands, BYD has always maintained high standards in its operations. In terms of terminal services for automotive customers, BYD has leveraged its experience in the battery industry to continuously provide exceptional value to car owners and has proposed the "Core" philosophy of "putting customers first." "We focus on analyzing customers' real needs. Only by understanding what customers need can we provide appropriate and targeted services. Our services are more rational and long-term oriented," explained Xia Zhibing, General Manager of BYD Auto Sales Co., Ltd.
19
4
Share

Where is the cabin air filter located in the MG GS?

The cabin air filter in the MG GS is located inside the glove compartment in front of the front passenger seat. The MG GS uses a cabin air filter with model number EF832001. If the vehicle is operated in an area with poor environmental air quality, it is recommended to use an activated carbon cabin air filter, which requires regular replacement. Below is additional information about the MG GS cabin air filter: 1. Remove the fasteners located in the front part of the engine compartment near the front passenger side. The cabin air filter is placed deep inside, so be careful not to damage the fasteners during removal. 2. Take out the sound insulation cotton and replace the old cabin air filter with a new one. 3. There is an arrow indicator on the cabin air filter, located on the outer side. Pay attention not to install it backwards during installation, otherwise the cabin air filter will not achieve its purification function. 4. There are two types of cabin air filters: one with activated carbon and one without activated carbon.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.