Is it necessary to install an engine guard plate?

What is the fuel consumption of the BYD Surui?

BYD Surui's fuel consumption is within 7.5, but it can exceed 10 if frequently driven in pure urban or suburban areas. Below is the relevant introduction: Power aspects of BYD Surui: The Surui is equipped with BYD's most advanced golden powertrain: a 1.5 turbocharged direct injection engine. It comes with a 6-speed dual-clutch automatic transmission (DCT), with a shift time of less than 0.2 seconds and a combined fuel consumption of 6.5 liters per 100 kilometers, aiming to provide consumers with a perfect driving experience. Methods to reduce car fuel consumption: Avoid sudden braking as much as possible, avoid prolonged engine idling, maintain an appropriate driving speed. Keep the vehicle's aerodynamic drag low, perform regular maintenance, maintain normal tire pressure levels, reduce the car's load, and choose reasonable travel routes.

10

5

Share

What is the reason for a motorcycle not starting after falling over?

The reason for not being able to start after falling over may be due to excessive fuel entering the cylinder when trying to start after picking it up, causing flooding and preventing startup. Relevant explanations are as follows: 1. Reason for not starting: When the motorcycle falls over, some fuel from the carburetor flows out through the vent hole, and some enters the cylinder. When picking it up, too much fuel enters the cylinder, causing flooding and preventing startup. Note that owners who do not plan to travel long distances should not fill the fuel tank completely to maintain fuel freshness and reduce vehicle weight. 2. Solution: Simply remove the spark plug, dry the fuel on the spark plug, press the electric start to spray out the fuel in the cylinder, then reinstall the spark plug to start the motorcycle.

18

3

Share

Does the Engine Start-Stop System Affect the Air Conditioning?

The start-stop system has minimal impact on the air conditioning compressor. The engine auto start-stop system primarily operates as a hot start, and its activation is determined based on factors such as the battery condition and the load on the vehicle's electrical system. The engine shuts off to save fuel without compromising the comfort and safety functions of the in-car electrical systems. Additional information: 1. In scenarios like waiting at traffic lights or in congested roads, the intervals between stopping and starting are limited, so the impact on electrical systems, including the air conditioning, is relatively minor. 2. How the air conditioning compressor works: During actual operation, it repeatedly starts and stops. It automatically stops when the interior temperature is low and re-engages when it gets hot, utilizing an electromagnetic clutch that is not easily damaged.

6

5

Share

Can I apply for a Class B license immediately after obtaining a Class D license?

No. You must wait for one year after obtaining a Class D license before you can apply for a Class B license. Here is relevant information: Class B: A Class B license allows driving all vehicle types below large trucks, specifically divided into B1 which permits driving medium-sized passenger vehicles (including urban buses with 10-19 passengers); B2 permits driving heavy and medium-duty trucks; and large, heavy, and medium-sized special purpose vehicles. Driver's License: The full name is Motor Vehicle Driver's License, also known as a "driver's license," which is a legally required certification for operating motor vehicles. Driving a motor vehicle requires certain skills, and without these skills, driving randomly may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.

12

1

Share

What is the difference between single-piston and dual-piston calipers?

Dual-piston calipers and single-piston calipers differ in their design approach. Below are the key distinctions: Single-piston calipers: Most single-piston calipers found on production vehicles utilize a one-way piston configuration. The brake pad on the opposite side is pushed by the reaction force of the caliper, hence they are also referred to as "floating calipers." Dual-piston calipers: With dual-piston calipers, both the inner and outer sections of the caliper remain stationary. The clamping force for the inner and outer brake pads is independently managed by pistons on opposite sides, earning them the name "fixed calipers." When comparing single-piston and multi-piston calipers, single-piston designs often leave unused space that cannot be filled. To minimize the overall caliper size while maximizing piston area, dual-piston calipers were developed.

13

2

Share

How to Access the Rear Seats of a Mustang?

To access the rear seats of a Mustang, follow these steps: There is a handle on each of the front seats. Lift the handle upwards to release the seatback, then push the seatback forward to gain access to the rear seats. Taking the 2020 Mustang as an example, its body dimensions are: length 4794mm, width 1916mm, height 1391mm, with a wheelbase of 2720mm. The fuel tank capacity is 58.9 liters, and the curb weight is 1702kg. The 2020 Mustang features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.3T turbocharged engine, delivering a maximum horsepower of 299PS, a maximum power of 220kW, and a maximum torque of 434Nm, paired with a 10-speed automatic transmission.

16

0

Share

Is it necessary to install an engine guard plate?

What is the fuel consumption of the BYD Surui?

What is the reason for a motorcycle not starting after falling over?

Does the Engine Start-Stop System Affect the Air Conditioning?

Can I apply for a Class B license immediately after obtaining a Class D license?

What is the difference between single-piston and dual-piston calipers?

How to Access the Rear Seats of a Mustang?

What is the engine of Haima Automobile?

Does Storing Engine Oil in the Trunk Have Any Impact in Summer?

What is the depreciation period for motorcycles?

What are the clearance values for the intake valve and exhaust valve?