Is it necessary to install ambient lighting at a 4S shop?

1 Answers
MacKiara
07/29/25 1:28am
Ambient lighting can be installed at a 4S shop or elsewhere. Whether it's a new or used car, ambient lighting modifications are possible. Professional modifications for ambient lighting or exterior trim and lights are generally non-destructive installations that won't damage the car's original wiring, and they typically won't affect the warranty provided by the 4S shop. If the modification is non-destructive and the car develops issues requiring warranty service from the 4S shop, but the 4S shop refuses to honor the warranty, or the insurance company denies coverage, you can file a complaint. Door panel interior: When removing the door panel interior, be cautious as the clips are fragile and require gentle handling. Center console display: When installing or removing the center console display, take care not to scratch the dashboard. Mounting tools: When routing the wiring, use mounting tools to secure the ambient lighting wires to prevent rattling noises.
Was this review help?
17
3
Share
More Forum Discussions

What is the 0 point position on the steering wheel?

The 0 point on the steering wheel is located at the very top of the steering wheel. Here is some information about the steering wheel: 1. Introduction: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. 2. Function: The function of the steering wheel is to convert the force applied by the driver on the edge of the steering wheel into torque and transmit it to the steering shaft. 3. Composition: It mainly consists of a skeleton, foam, and corresponding installation clips or screw holes for the driver's airbag (DAB). 4. Fault diagnosis: Drive at a speed of 15 kilometers per hour on a relatively open road, turning the steering wheel left and right while driving to check if the steering wheel is flexible, whether there is a lack of return force, and whether the vehicle deviates when the steering wheel is released.
16
1
Share

What is the degree of wheel turn when the steering wheel is fully locked?

Generally speaking, the wheel turning angle when the steering wheel is fully locked is about 25-30 degrees for most vehicles, while rear-wheel-drive cars typically have a range of 30-35 degrees. For high-end vehicle models, the universal joint can withstand greater stress, allowing for a larger tire turning angle. Below is some information about steering wheels: 1. Introduction: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, aircraft, etc. 2. Function: The steering wheel converts the force applied by the driver on its rim into torque, which is then transmitted to the steering shaft. 3. Composition: It mainly consists of a frame, foam, and corresponding installation clips or screw holes for the driver's airbag (DAB).
11
0
Share

Does the 911 have four seats?

Porsche sports car series does not have four-seat models, but the 911 series has convertible and panoramic sunroof versions. Porsche's recently launched four-door sports sedan Panamera and SUV Cayenne are four-door, four-seat models. Cars generally come in standard, low, medium, and high configurations, which respectively refer to: 1. Low configuration: generally simplified, without leather seats or power windows, lacking many electronic and electrical control functions; 2. Standard configuration: includes normal electric controls such as power windows, power steering, and air conditioning; 3. Medium configuration: slightly more advanced than the standard, including all standard functions and possibly additional features like airbags, sunroof, leather seats, power seats, and seat heating; 4. High configuration: higher than all the above, can be considered the flagship version of the model.
20
5
Share

What are the reasons why the three power windows of the 7th-generation Accord cannot be raised?

If the power windows cannot be raised, first determine whether the issue affects some windows or all windows. If only some windows cannot be raised, the main reasons include the following: deformation or damage to the window channel; loose screws securing the window regulator; or damage to the window regulator itself. Below are specific methods to check whether the glass has been replaced: 1. Check the manufacturer: Examine the manufacturer's code on the glass to identify which company produced it. Automakers typically purchase glass in bulk and rarely use multiple brands or the same brand from different production locations. 2. Check the production date of the glass: If the production dates of the glass pieces on a car vary significantly, this may indicate that the car has been refurbished or the glass was replaced later. 3. Check the glass markings: If the glass has been replaced, the markings on the new glass will differ significantly from the original factory markings.
15
1
Share

What does an 'A' with a slash on the dashboard mean?

When the car dashboard displays an 'A' with a slash inside a circle, it indicates that the engine auto start-stop function cannot be activated at this time. Here are the specific details: 1. Auto Start-Stop Function. The auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move again. This system is implemented by equipping a traditional engine with an enhanced motor that has idle start-stop capability, allowing the engine to completely shut off when the conditions for idle stopping are met. 2. Dashboard Warning Lights. (1) Hazard Warning Light: Used to alert other vehicles and pedestrians when the car experiences a major malfunction or emergency. (2) Fuel Indicator Light: This light warns of low fuel levels. When illuminated, it means the fuel is nearly depleted. (3) Washer Fluid Indicator Light: Shows the level of windshield washer fluid. If the fluid is running low, this light will come on to remind the driver to refill it promptly.
7
3
Share

What does it mean to not follow instructions during parallel parking?

Not following instructions during parallel parking includes many factors, such as not adhering to the test requirements regarding vehicle distance, left and rear sides, reference points, and steering timing when entering the parking space, all of which can be judged as not following instructions. Below is an introduction to parallel parking: 1. Project Overview: Parallel parking is a part of the second subject in the driver's license test. Parallel parking is becoming increasingly common in urban areas, especially as parking spaces in formal parking lots become more limited. Many places have designated parking spaces along the sides of streets, creating "parallel parking spaces." 2. Assessment Points: The test evaluates the driver's ability to correctly park the vehicle on the right side of the road. 3. Operation Requirements: The driver must park the vehicle in the right-side parking space without the wheels touching the lane boundary lines or the parking space boundary lines.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.