Is it necessary to install a tire pressure monitoring system in a car?

2 Answers
DeColton
07/29/25 5:35am
Installing a tire pressure monitoring system in a car allows for real-time monitoring of the tire conditions to ensure they are normal, guaranteeing safe driving and preventing potential tire hazards. Therefore, it is necessary to install one. Below is an introduction to the tire pressure monitoring system: The car's tire pressure monitoring system can automatically and continuously monitor the tire status by recording the rotation speed of the tires or through sensors installed inside the tires, providing safe and effective protection for driving. The sensors transmit data to the tire pressure indicator, which lights up to alert the driver to check the car's tire pressure. The tire pressure monitoring system is divided into indirect and direct systems. The indirect tire pressure monitoring system is used in most cars, while the direct system is relatively cheaper.
Was this review help?
3
2
Share
JustinLee
08/12/25 9:09am
Honestly, installing a tire pressure monitoring system is really necessary. Once when I was driving on the highway, I suddenly felt the car shaking, and later found out the tire pressure was too low—it was almost a disaster. From a safety perspective, unstable tire pressure can lead to blowouts or loss of control, which is high risk. Installing TPMS allows real-time monitoring and early warnings to prevent accidents. In the long run, maintaining correct tire pressure saves fuel and reduces tire wear, making it economically practical. Personally, I feel much more at ease driving after installing it, especially when frequently traveling long distances or carrying family. The cost ranges from a few hundred to a thousand, but compared to the potential savings, it's worth it. In short, whether it's a new or old car, adding it is like a good insurance policy.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Where is Anjiesda Tire produced?

Anjiesda tires are produced in Qingdao, Shandong. Tires are circular elastic rubber products assembled on various vehicles or machinery that roll on the ground. They are usually mounted on metal rims to support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee driving performance. Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during use. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning ability. Additionally, they require high wear resistance, flex resistance, low rolling resistance, and minimal heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant rubber demand of tires.
20
2
Share

How fast can 116 horsepower run on the highway?

116 horsepower can reach a speed of 120 on the highway. Introduction to speed: Speed is a form of expression that refers to the total distance an object travels in 1 hour. The unit of speed is kilometers (km) or miles per hour (mph). Speed is commonly used in the field of transportation, but it is not the standard speed unit in the International System of Units. Misconceptions about speed: The term 'speed' already indicates that the time unit is 1 hour, so when describing speed, additional time-related words should not be added. For example, do not say 'a speed of 80 kilometers per hour' as 'a speed of 80 kilometers per hour per hour,' 'a speed of 80 km per hour per hour,' or 'a speed of 80 km/h,' as these are incorrect grammar.
2
2
Share

Is it harmful to add half a liter more engine oil?

Impact: It can easily create greater resistance to the crankshaft's rotation, thereby affecting the engine's power output and increasing fuel consumption. Reduced power output and increased fuel consumption: The crankshaft in a car engine requires lubricant for smooth rotation. However, if too much oil is added and the crankshaft is submerged in oil, it will cause excessive resistance during rotation, leading to reduced power output and higher fuel consumption. Accelerated aging of many internal components: When too much engine oil is added, the pressure between various internal parts of the car increases significantly. Frequent use under such high pressure can accelerate the aging of these components. Particularly for the crankshaft oil seal, excessive pressure and severe aging can result in oil leaks.
19
1
Share

Is Vehicle Damage Insurance Mandatory?

Vehicle damage insurance is not a mandatory coverage. It refers to a type of commercial auto insurance where the insurer compensates within reasonable limits for damages to the insured vehicle caused by accidents occurring while the vehicle is being driven by the insured or an authorized driver. Coverage scope of vehicle damage insurance: Vehicle damage insurance typically covers losses to the insured vehicle and related rescue expenses resulting from natural disasters such as lightning, storms, heavy rain, floods, as well as accidental incidents like collisions and overturns. Inclusions of vehicle damage insurance: Generally, it includes comprehensive vehicle damage insurance, which encompasses no-deductible coverage, spontaneous combustion insurance, glass breakage insurance, water ingress insurance, non-recovery of third-party insurance, and scratch insurance.
17
1
Share

How many cylinders does the new BMW 3 Series have?

BMW's new 3 Series is equipped with a four-cylinder engine. This model is a mid-sized car launched by BMW. The dimensions of the new BMW 3 Series are 4719mm in length, 1827mm in width, and 1459mm in height, with a wheelbase of 2851mm. Here are some key details about the new BMW 3 Series: 1. In terms of power, the car is powered by a 2.0T turbocharged engine with a maximum power output of 135kw and a maximum torque of 300nm. 2. For the transmission, it is paired with an 8-speed automatic transmission. 3. In terms of appearance, the front features a large kidney-shaped grille.
7
4
Share

What are the new regulations for penalty points on an A1 driver's license?

The new regulations for penalty points on an A1 driver's license are as follows: Scoring cycle: The cumulative scoring cycle for road traffic safety violations (i.e., the scoring cycle) is 12 months, with a full score of 12 points. It is calculated from the date the motor vehicle driver's license is initially issued, and so on in a continuous cycle. The clearance time for the driver's license is the issuance date on the license, and the system automatically clears the points on the issuance date each year. Accumulating 12 points: You need to go to the vehicle management office at the place where the driver's license was issued or where the violation occurred to participate in learning and take the subject one test (if you accumulate 12 points twice in a row in one scoring cycle, the subject three test will be added). Only after passing the test can the points be cleared.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.