Is it necessary to install a tire pressure monitoring system for motorcycles?

2 Answers
DelJosie
07/29/25 3:30am
It is necessary for tubeless tires. Since tubeless tires lose air more slowly, detecting pressure loss in time helps ensure safe driving. For tires with inner tubes, which deflate quickly, it is less necessary. For adventure bikes, sometimes it is required to lower tire pressure according to road conditions. When returning to normal roads, reinflating to the standard pressure is needed, and a tire pressure monitoring system makes this much more convenient. Below is relevant information about tire pressure monitoring systems: Tire Pressure Monitoring System (TPMS): Abbreviated as "TPMS", short for "tire pressure monitoring system". This technology can automatically monitor various tire conditions in real time by recording tire rotation speed or through electronic sensors installed in the tires, providing effective safety assurance for driving. Related classifications: One is the indirect TPMS, which determines tire abnormalities by detecting differences in tire rotation speed; the other is the direct TPMS, which involves installing four tire pressure monitoring sensors inside the tires. These sensors automatically monitor tire pressure and temperature in real time, whether the vehicle is stationary or moving, and promptly alert for high pressure, low pressure, or high temperature to avoid traffic accidents caused by tire failures, ensuring driving safety.
Was this review help?
13
3
Share
SanGenesis
08/12/25 7:20am
As a long-time motorcycle enthusiast, I must say installing a tire pressure monitoring system is absolutely necessary, especially for safety considerations. Motorcycles are inherently more susceptible to tire pressure issues than cars. Insufficient pressure can lead to blowouts or loss of control, which is particularly dangerous at high speeds. I personally experienced a terrifying moment when my bike slid during a turn due to low tire pressure, and since then, I've relied on a monitoring system for real-time alerts. If you don't want to spend extra money, regular manual checks are an alternative, but real-time monitoring offers greater peace of mind—especially during rainy conditions or long rides, where minor changes can escalate into major problems. Additionally, motorcycle tires wear out faster, and improper pressure can shorten their lifespan and safety period. Investing in this device can protect both you and your beloved bike at critical moments, preventing potential accidents.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What does the radio in the car mean?

The radio in the car means: It refers to the radio switch button. When you want to listen to music, simply press the radio button in the car. The car radio is a sound receiving and playback device, which helps reduce boredom and refreshes the driver and passengers during the ride. Here is an introduction to other mode buttons in the car: 1. AUTO: AUTO stands for automatic control, which means it automatically adjusts the temperature and fan speed to suitable levels when the button is pressed. 2. DUAL: DUAL is the independent control button, allowing the driver to control the temperature and fan speed inside the car, while the front passenger can also control them. 3. A/C button: The A/C button on the car's central console is the air conditioning button. In summer, you can first turn the fan knob and then press the A/C button to start the air conditioning compressor for cooling, thereby lowering the temperature inside the car.
8
1
Share

What is the transmission model of the Yeti?

The transmission model of the Yeti is DTC. The 1.4L turbocharged engine is paired with a 7-speed dual-clutch transmission, the 1.8L turbocharged engine is matched with a 6-speed dual-clutch transmission, and the 1.6L naturally aspirated engine is coupled with a 5-speed manual transmission. The Yeti is equipped with an intelligent lighting system, intelligent parking system, driver fatigue reminder, and PLA intelligent parking assist system, with a top speed of 173 km/h. The dimensions of the Yeti are 4275mm in length, 1793mm in width, and 1682mm in height, with a wheelbase of 2638mm. The engine has a maximum power of 81 kW and a maximum power speed of 5800 rpm.
10
3
Share

What are the differences between domestically produced and imported Volvo XC60?

Volvo XC60 domestically produced and imported differences are: 1. Appearance: The domestically produced version features 10-spoke and dual 6-spoke wheel designs that differ from the imported version, with the addition of a 'Volvo Asia Pacific' badge on the rear. 2. Interior: Maintains a high degree of consistency with the imported model. The most significant change compared to the imported version lies in the powertrain, with the domestically produced XC60 adding a 2.0T low-power engine. 3. Powertrain: The Volvo XC60 T4 is equipped with a 2.0T low-power engine, while the T5 features a 2.0T high-power version, delivering a maximum power of 187kW (254PS)/5500rpm and a maximum torque of 350N·m/1500-4800rpm. 4. Transmission system: All models are equipped with an 8-speed automatic transmission.
11
2
Share

What are the reasons for the high-pressure oil pump of Jiangling Baodian not delivering oil?

Jiangling Baodian high-pressure oil pump not delivering oil may be caused by: the auxiliary shutdown switch being in the connected state, rail pressure being too low, or the battery voltage being too low. Below are detailed explanations of the working principles of the high-pressure oil pump: Oil suction process and oil return stroke: The downward movement of the pump piston provides the power for oil suction, simultaneously opening the intake valve, allowing fuel to be drawn into the pump chamber. In the final third of the pump piston stroke, the fuel pressure regulating valve is energized, keeping the intake valve open during the initial upward movement of the pump piston to facilitate oil return. This is the oil return process. To control the actual fuel supply, the intake valve remains open during the initial upward movement of the pump piston, with excess fuel being pushed back to the low-pressure side by the pump piston. The pressure damper's role is to absorb the pressure fluctuations generated during this process. This is the oil return stroke.
9
0
Share

How to Open the Fuel Tank Cap of the Arrizo 5?

The method to open the fuel tank cap of the Arrizo 5 is as follows: The fuel tank cap release lever is located above the engine hood opening handle. Pull this release lever to open the fuel tank cap. The fuel tank cap can be opened in several ways: using a mechanical key, an in-car switch, or by pressing it. The Arrizo 5 is a compact sedan under the Chery Automobile brand, with a maximum engine power of 85 kW and a maximum torque of 143 Nm. The dimensions of the Arrizo 5 are 4572mm in length, 1825mm in width, and 1482mm in height, with a wheelbase of 2670mm. It is equipped with a 5-speed manual transmission and has a fuel tank capacity of 48L.
1
4
Share

What are the differences between the BMW X4 and X4M?

The differences between the BMW X4 and X4M are: 1. Different maximum engine horsepower: The BMW X4 has a maximum engine horsepower of 184 hp; the BMW X4M has a maximum engine horsepower of 480 hp. 2. Different maximum engine torque: The BMW X4 has a maximum engine torque of 290 Nm; the BMW X4M has a maximum engine torque of 600 Nm. 3. Different top speed: The BMW X4 has a top speed of 210 km/h; the BMW X4M has a top speed of 250 km/h. 4. Different maximum engine power: The BMW X4 has a maximum engine power of 135 kW; the BMW X4M has a maximum engine power of 353 kW.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.