Is it necessary to install a protective box for charging piles?

2 Answers
Jonathan
07/29/25 9:16pm
When the parking space is underground and the property management is standardized, it is not necessary to install a protective box. If the parking space is on the ground or the community management is poor, installing a protective box is necessary. Function of charging piles: The function of a charging pile is similar to that of a fuel dispenser in a gas station. It can be fixed on the ground or walls and installed in public buildings (such as public buildings, shopping malls, public parking lots, etc.) and residential community parking lots or charging stations. It can charge various types of electric vehicles according to different voltage levels. Classification of parking spaces: A parking space, also known as a parking spot, refers to a place for parking, including outdoor and indoor locations. Parking spaces can be divided into two types based on charging: free parking spaces and paid parking spaces.
Was this review help?
15
4
Share
DiCaroline
08/15/25 7:45pm
I have a Husky that loves to cause mischief in the yard, so the charging station must be installed with a protective box. Without it, water accumulation in the charging port during rainy days can be dangerous, and it's more prone to malfunctions during thunderstorms. The protective box also prevents pets from chewing on the cables and keeps neighborhood kids from getting shocked while touching it. Remember to choose a waterproof and lightning-proof 304 stainless steel box with ventilation holes at the bottom. Although the installation cost 800 yuan, the charging station itself is worth seven or eight thousand, and it won’t need replacement for five years. The property management also specifically reminded that installing a protective box for outdoor charging stations can avoid complaints about safety hazards. Now, charging feels much more secure.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What is the difference between T and L in car engines?

In cars, T stands for turbocharging, while L represents naturally aspirated. Below are the differences between T and L: 1. Turbocharging is a technology that uses exhaust gases generated by internal combustion engine operation to drive an air compressor. However, after boosting, the pressure and temperature during engine operation will increase, so the engine lifespan will be shorter compared to naturally aspirated engines of the same displacement. Additionally, mechanical performance and lubrication performance will be affected, which to some extent limits the application of turbocharging technology in engines. 2. Naturally aspirated is one type of car engine that can compress air into the combustion chamber without any boosting. Naturally aspirated engines far outperform turbocharged engines in terms of smooth power output and direct responsiveness.
9
2
Share

Do I still need to practice driving if I failed the Subject 3 test?

You still need to practice driving if you failed the Subject 3 test. Here are the detailed explanations: 1. Insufficient practice: If the failure was due to inadequate practice before the test and unfamiliarity with the vehicle, you should practice more before the next test. If you are not familiar with the test route and evaluation criteria, it is recommended to participate in a mock test before the actual exam to familiarize yourself with the test route and evaluation standards. 2. Unstable mindset: Many people experience stage fright or test anxiety. Just the thought of exams can make them extremely nervous. Once nervous during the test, they may forget many operational steps. Therefore, maintaining a proper mindset before the exam is crucial. Before the test, remember to relax yourself and mentally go through the test process, which can help a lot.
17
4
Share

Can You Brake While in Half-Clutch?

You can brake while in a half-clutch state. However, braking in this state may cause the engine to stall, so it's best to fully depress the clutch pedal when braking. The semi-engaged state of the clutch causes significant wear and tear on the vehicle. Therefore, it's generally advisable to avoid keeping the clutch in a semi-engaged state. The correct methods for shifting gears in a manual transmission car are as follows: 1. Always fully depress the clutch pedal before shifting, and operate the gear lever gently, smoothly, and accurately. 2. When shifting while driving, pay attention to choosing the right time to shift. Before upshifting, always accelerate first. When the vehicle's speed reaches the appropriate speed for the next higher gear, shift to the higher gear promptly. 3. When downshifting, as the speed decreases to a certain level, shift to a lower gear.
7
3
Share

Do vehicles need to be inspected every year?

Vehicles do not need to be inspected every year, as the inspection intervals vary depending on the vehicle type. Below are the inspection schedules for different vehicle types: 1. Passenger vehicles for commercial use must be inspected once a year within the first 5 years, and once every 6 months after exceeding 5 years. 2. Motorcycles must be inspected once every 2 years within the first 4 years, and once a year after exceeding 4 years. 3. Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years, and once every 6 months after exceeding 10 years. 4. Small and mini non-commercial passenger vehicles must be inspected once every 2 years within the first 6 years, once a year after exceeding 6 years, and once every 6 months after exceeding 15 years.
19
2
Share

What is the best engine oil for the new Sagitar 1.6?

The new Sagitar 1.6 performs well with 5W30 or 5W40 engine oil, and it is recommended to use fully synthetic or semi-synthetic oil. Engine oil, also known as engine lubricant, plays multiple roles such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the "blood" of a car. In terms of dimensions, the new Sagitar measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. It is a 4-door, 5-seater sedan, equipped with a 5-speed manual transmission and powered by a 1.2T L4 turbocharged engine.
14
0
Share

Why Does the Engine Shake While Driving?

Reasons for engine shaking while driving: 1. The engine mount's function is to reduce vibration and provide cushioning during engine operation, as well as to secure the engine. Once the engine mount becomes aged or loose, engine shaking becomes noticeably abnormal. 2. Excessive carbon buildup inside the engine reduces the car's ignition energy and intake efficiency, ultimately leading to symptoms such as engine shaking and sluggish acceleration. 3. Using incompatible fuel octane ratings can result in decreased car output power and reduced performance. Alternatively, if the fuel tank cap vent is blocked, or if the fuel tank switch, fuel filter, or the fuel line between the fuel tank and carburetor are partially obstructed, the required fuel supply cannot be met, leading to an overly lean air-fuel mixture and engine shaking. 4. If the air filter is not cleaned in time after prolonged use and becomes clogged, insufficient air intake will cause an overly rich combustible mixture, reducing engine power. For vehicles equipped with a turbocharger, any malfunction in the turbocharging device can also cause the engine to shake during acceleration.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.