Is it necessary to install a car sunshade mat?

Does Starting with Full Throttle Damage an Automatic Transmission Car?

Starting with full throttle in an automatic transmission car can cause damage. Excessive throttle during startup can easily lead to tire slippage and spinning, resulting in tire wear. Additionally, it increases the engine load, not only raising fuel consumption but also shortening the engine's lifespan. Below are precautions for starting an automatic transmission car: Avoid Immediate Acceleration: It is best to let the engine idle for more than 30 seconds, allowing the automatic transmission fluid to fully fill all oil chambers. This ensures the automatic transmission remains in optimal working condition before engaging the gear and starting to drive. Control the Accelerator Pedal Gently When Starting: If the accelerator pedal is pressed too forcefully during startup, causing the throttle to open excessively, the extra power beyond what is needed for starting the car will result in rapid acceleration. This can quickly increase the vehicle's speed and easily lead to rear-end collisions during startup.

9

0

Share

What Are the Standards for Vehicle Water Damage Claims?

Vehicle water damage claim standards are based on whether the relevant components of the car have reached the level of failure or damage. Below is a detailed introduction regarding vehicle insurance: 1. Overview: Vehicle insurance, also known as motor vehicle insurance or auto insurance, refers to a type of commercial insurance that covers liability for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. 2. Others: Auto insurance is a type of property insurance. In the field of property insurance, auto insurance is a relatively young category. In the early stages of auto insurance, the primary coverage was third-party liability insurance, which gradually expanded to include risks such as collision damage to the vehicle body.

1

2

Share

Is 120°C Oil Temperature Normal for a BMW 5 Series?

An oil temperature of 120°C is not normal for a BMW 5 Series. Extended information: BMW engine cooling has four temperature modes: 1. Economy Mode: The maximum temperature in Economy Mode is 108-110°C, varying by engine type. For example, the N20 engine reaches 109°C, while the N52 engine reaches 112°C. 2. Normal Mode: The maximum temperature in Normal Mode is 104-106°C, varying by engine type. For example, the N20 engine reaches 106°C, while the N52 engine reaches 105°C. 3. High Power Mode: The maximum temperature in High Power Mode is 95°C. 4. High Power Mode + Thermostat Regulation via Characteristic Curve: The maximum temperature in this mode is 80°C or 90°C, depending on the engine type.

20

5

Share

What are the differences between the 350Z and 370Z?

350Z and 370Z differ in engine displacement. Below is a detailed introduction to their differences: 1. Power: The 350Z is equipped with a 3.5L V6 engine, delivering a maximum power of 206KW (280HP) and a maximum torque of 363NM. Currently, the 350Z is only available with a 6-speed manual transmission. In contrast, the 370Z features a 3.7L V6 engine, producing a maximum power of 244KW (332HP) and a maximum torque of 366NM. 2. Materials: The new 370Z utilizes more lightweight materials. These modifications result in a lighter body weight, significantly enhancing the performance of the new 370Z in various aspects (acceleration, braking, and cornering).

8

3

Share

Is a Fire Extinguisher Required for Vehicle Annual Inspection?

Vehicle annual inspection requires a fire extinguisher. Both the vehicle's fire extinguisher and warning triangle are essential items during the annual inspection. Some vehicles do not come equipped with a fire extinguisher when leaving the factory. Therefore, car owners should prepare one themselves for their own safety and to pass the annual inspection smoothly. Below is additional information: 1. Note: During the annual inspection, the vehicle management office will check the vehicle's lights. If the vehicle's lights are found to be too dim or too bright, it will be deemed unqualified and will not pass the annual inspection. Therefore, it is necessary to check the vehicle's lights in advance before the annual inspection. If the lights are too dim, check the light circuits and whether the bulbs are aged, and replace relevant parts if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the annual inspection to pass the test. 2. Vehicle braking performance: The braking performance of a vehicle is one of the most important indicators of vehicle safety and is a mandatory inspection item during the annual inspection. Therefore, it is necessary to check the brake system in advance before the annual inspection. Brake fluid and brake pads are two key areas that need attention in the brake system. Dirty brake fluid or excessive water content can lead to soft brakes, and excessive wear of brake pads can result in reduced braking force and abnormal brake noise.

5

2

Share

What is the Suitable Color Temperature for Xenon Lights?

4300K and 5000K color temperatures are more suitable. The advantages of automotive xenon lights are as follows: 1. Performance improvement: Under the stable operation of the ballast, the HID gas discharge headlight assembly only requires 35W of power to supply the xenon bulb for illumination, greatly reducing the burden on the vehicle's electrical system and correspondingly improving vehicle performance. 2. Brightness enhancement: High brightness ID lights can output up to 3200Lm, meaning the brightness of automotive xenon headlights is increased by 300%, illuminating brighter, wider, and farther, leaving no dark spots. 3. High comfort: The light emitted by ID lights with a color temperature of around 6000K is close to the color temperature of daylight, which is most acceptable and comfortable to the human eye. Such lighting used for vehicle nighttime illumination can effectively reduce driver's visual fatigue, directly and significantly improving driving safety. 4. Long service life: Xenon headlights have no tungsten filament, eliminating the problem of filament breakage, with a service life of approximately 2000-3000 hours. 5. Easy installation: Installation is convenient; simply plug the headlight power connector into the ballast input end, connect and secure the bulb (the xenon lamp base is the same as the original halogen lamp base).

12

3

Share

Is it necessary to install a car sunshade mat?

Does Starting with Full Throttle Damage an Automatic Transmission Car?

What Are the Standards for Vehicle Water Damage Claims?

Is 120°C Oil Temperature Normal for a BMW 5 Series?

What are the differences between the 350Z and 370Z?

Is a Fire Extinguisher Required for Vehicle Annual Inspection?

What is the Suitable Color Temperature for Xenon Lights?

Are the reference points the same for left and right reverse parking?

Where to Source Cars for Used Car Business?

What is the displacement of 350t?

What Causes a Car to Click Repeatedly But Not Start?