Is it necessary to install a 360-degree panoramic camera?

1 Answers
John
07/30/25 1:59am
It is not necessary to install a 360-degree panoramic camera. Installing a 360-degree panoramic camera is a form of invasive modification. The specific damages are as follows: 1. Drilling holes in the rearview mirrors: Since two cameras in the 360-degree panoramic system need to be installed under the rearview mirrors, it is necessary to drill two mounting holes in the mirrors. 2. Dismantling a large number of vehicle components: Installing a 360-degree panoramic camera requires removing many vehicle parts, such as the rearview mirrors, door panels, center console panels, and in some cases, even the doors. 3. Safety hazards: If the product quality is substandard or the wiring is improperly arranged, it can easily pose safety risks, including the potential for spontaneous combustion.
Was this review help?
16
5
Share
More Forum Discussions

What is the effective range of vehicle networking?

Vehicle networking has no distance limitation as long as there is internet connectivity. Below is a related introduction to vehicle networking technology: 1. Navigation function: Through a button or voice command, you can obtain desired information such as routes to destinations, road conditions ahead, and weather updates. 2. OBD function: In Chinese, it's called 'on-board diagnostic system'. By connecting to the vehicle's OBD port, it can read vehicle data and store it in the cloud via wireless networks. Vehicle owners can then check real-time vehicle status such as fuel consumption, emissions, and fault codes through mobile or computer clients.
12
2
Share

What Causes Wiper Blade Chatter?

The causes and solutions for wiper blade chatter are as follows: 1. Wiper blade issues causing chatter: Wiper blades are rubber products that harden and degrade over time, especially noticeable in winter. If they no longer clean effectively, the simplest solution is to replace them. Generally, wiper blades should be replaced every one to two years. 2. Foreign objects between the wiper blade and windshield causing chatter: When activating the wipers, a sharp friction noise may occur. Check and clean any debris lodged under or on the wiper blades to ensure they remain clean. 3. Wiper linkage bushing wear causing chatter: Over time, the wiper linkage mechanism ages, the spring tension in the wiper arm weakens, and bushings wear out or even detach. Inspect the wiper arm and linkage bushings. 4. Wiper motor issues causing chatter: If the motor lacks sufficient power, it may indicate the end of its lifespan. A detailed inspection at a professional repair shop is recommended.
16
0
Share

Which Volkswagen model is the T-Cross?

T-Cross is the Volkswagen T-Cross. The specific details are as follows: 1. Body: The Volkswagen T-Cross has a length, width, and height of 421.8 cm, 176 cm, and 158.9 cm respectively, with a wheelbase of 265.1 cm. 2. Interior: It offers five color options: Vitality Gold, Dream Blue, Polar White, Star Gray, and Romantic Red. 3. Powertrain: The Volkswagen T-Cross provides two engine options: a 1.5L naturally aspirated engine and a 1.4T turbocharged engine. (1) The 1.4T model has a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a DSG 7-speed transmission. (2) The 1.5L model has a maximum power of 83 kW, matched with a Tiptronic 6-speed automatic transmission.
12
3
Share

Will the owner be notified when a vehicle's registration is canceled?

Will the owner be notified when a vehicle's registration is canceled? According to regulations: For a registered motor vehicle, if the owner wishes to relocate within the jurisdiction of the vehicle management office where the vehicle is registered or change the owner's name or contact information, they must file a record with the registration office of the vehicle management office. Additional information: 1. Canceling registration: A registered vehicle is one that has been officially registered. Generally, one driver can register up to three non-personally owned motor vehicles at the same time, and one motor vehicle can be registered by up to three drivers other than the owner. If this limit is exceeded, the driver must cancel the registration of one vehicle before binding another. Canceling the registration of a vehicle means removing the personal information bound to the vehicle, thereby severing the relationship with the driver. 2. Consequences of canceling registration: If the owner of a motor vehicle fails to provide or cancel the personal information bound to the vehicle as required, they will bear the adverse consequences of not being promptly notified about road traffic accidents, traffic safety violations, vehicle management, and other related information. If traffic violations are not handled in time, late fees will be charged. If they remain unresolved by the end of the scoring cycle, this will affect the processing of driver's license and vehicle license-related services, and the vehicle's annual inspection will also be affected.
16
1
Share

At what water submersion height should a vehicle not be driven?

Generally, it is recommended not to drive when the water level exceeds 20 centimeters or reaches more than half of the wheel height. Below are the recommended steps to handle a water-submerged vehicle: 1. Slow down or stop: When encountering uncertain water depths, promptly apply the brakes. Avoid hesitation while driving. Stop and observe the waterline when trucks or large vehicles pass to determine if it's safe to proceed. 2. Maintain slow and steady movement: If the vehicle is already in a deep water section, stay calm, maintain steady throttle control to avoid excessive speed, and refrain from shifting gears or stopping. Exit the area as quickly as possible. 3. Post-flood precautions: Even if the vehicle appears undamaged, it's essential to have it inspected at a repair shop to prevent potential hidden issues. After the weather clears, open the doors and place the vehicle in sunlight with a fan blowing nearby to accelerate the drying process and prevent mold growth through air circulation.
11
5
Share

What Causes the Car Gear Shift to Be Stuck?

Here are the specific reasons why the gear shift lever cannot be moved: 1. P-gear lock solenoid valve failure: To prevent accidentally shifting into other gears when starting the vehicle, there is a P-gear solenoid valve. The solenoid valve needs to receive a signal from the brake pedal to release. These two components are interrelated, and if either one fails, it will prevent the gear shift lever from being moved out of P-gear into other gears. 2. Internal failure of the gear shift lever assembly: Wear of the internal gears in the gear shift lever can cause the lever to get stuck, making it difficult to move forward or backward, resulting in the inability to shift gears or difficulty in shifting. 3. Incomplete clutch disengagement: This may be caused by failure of the clutch disc and clutch pressure plate, requiring replacement of the clutch three-piece set—friction disc, pressure plate, and release bearing.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.