Is it necessary to go to a 4S shop for new car maintenance?

1 Answers
LaAlice
07/29/25 6:03pm
New car maintenance does not necessarily require going to a 4S shop; you can opt for regular maintenance at a reputable repair shop based on your needs. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. Its purposes are: 1. To keep the car clean and tidy; 2. To ensure good technical condition, eliminate hidden dangers, and prevent faults; 3. To slow down the deterioration process of parts and extend their service life. The items for car maintenance include: 1. Replacing the cabin air filter, air filter, oil filter, and engine oil; 2. Cleaning the throttle body, fuel injectors, and fuel lines; 3. Checking the brake pads and tire wear.
Was this review help?
8
4
Share
More Forum Discussions

What type of gasoline should the new Sylphy use?

The new Sylphy uses 92-octane gasoline. The grade of gasoline is classified by octane rating, with 92-octane gasoline referring to a fuel that has anti-knock performance equivalent to a mixture of 92% isooctane and 8% n-heptane. The higher the octane number, the better the anti-knock performance. The appropriate gasoline grade should be selected based on the engine's compression ratio, which is specified in the vehicle's manual. The Sylphy is a compact sedan under Nissan, with dimensions of 4641 mm in length, 1815 mm in width, and 1450 mm in height, and a wheelbase of 2712 mm. In terms of power, this car is equipped with a 1.6-liter naturally aspirated engine that features EVTC technology and multi-point fuel injection, with an aluminum alloy cylinder head and block.
14
2
Share

What is the safe parking distance to prevent 'dooring' accidents?

When parking, drivers should maintain a distance of 20-30 cm from the curb. Except for the driver, passengers should try to exit from the right side. After parking, the driver should remind passengers in advance, especially those in the back seat, to check for vehicles in all directions before opening the door. Most importantly, the driver should first open the door slightly or check the surroundings through the rearview mirror to ensure no approaching vehicles before fully opening the door and exiting. Changing lanes: When the student hears the instruction 'Please change lanes,' they should activate the turn signal and wait for 3 seconds before turning the steering wheel. If the driver is on a single-lane road, lane changing is not permitted at this time. Straight-line driving: Once straight-line driving begins, the steering wheel should not be turned arbitrarily, and the vehicle must not cross the solid lane line. The student should focus their vision into the distance and make minor adjustments to the steering wheel to maintain straight-line driving, rather than keeping the steering wheel fixed. Slowing down: When passing through crosswalks, school zones, bus stops, or straight intersections, the student should lightly press the brake pedal to slow down.
18
2
Share

How many seconds does the Aprilia 150 take to reach 100 km/h?

Aprilia GPR150 takes 12 seconds to accelerate from 0 to 100 km/h. Positioning: Aprilia's pure sports bike is the RS4125, which is positioned as an entry-level track bike with the added benefit of short-distance daily commuting. The GPR150 is an upgraded version of the GPR125, featuring increased displacement and improved performance. In addition to the power boost, some configurations have also been upgraded. The GPR150 is still assembled and produced domestically, giving it a slight price advantage over the fully imported Yamaha R15. Appearance: The new GPR150 continues the family design, with the "a" element still present on both sides of the body, along with the addition of Italian flag elements from the front face to the side covers. The decals on the entire bike cleverly utilize the concept of "lines" to outline the elegant contours of the vehicle. The red section extending from the front to the fuel tank complements the rear seat cushion, showcasing exquisite design and extraordinary appeal. The decals on the front fairing are cleaner and sharper, highlighting the bike's sporty DNA at every turn.
16
0
Share

How to Change the Jurisdiction of a Driver's License?

Methods for changing the jurisdiction of a driver's license: 1. Bring your ID card, driver's license, and photos to the Vehicle Management Office of the Municipal Public Security Traffic Police Detachment for processing; 2. At the Vehicle Management Office, fill out the motor vehicle driver's license application form, and submit the original and photocopies of your ID card and driver's license to the handling officer at the window for review; 3. Once approved, a new license will be issued. In some places, you may be asked to come back to collect it after ten days. The full name of the driver's license is the motor vehicle driver's license, also known as a driving license, which is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle recklessly may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
13
0
Share

How to Solve Difficulty in Shifting Gears?

Difficulty in shifting gears can be resolved by: replacing the clutch, as incomplete clutch disengagement will prevent proper gear engagement. The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. During vehicle operation, the driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby interrupting or transmitting the engine's power to the transmission. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be disengaged or engaged at any time.
18
2
Share

How to Adjust Excessive Steering Wheel Play?

Steering wheel play can be adjusted by performing a wheel alignment, adjusting the steering gear, and inspecting the clearance of all connecting components. During daily driving, avoid turning the steering wheel to its full lock position, especially when stationary. As the vehicle ages, steering wheel play tends to increase due to wear on the steering gear rack and pinion mechanism as well as suspension linkage components, creating larger gaps that require greater steering input for vehicle turning. When excessive play is detected, promptly visit a repair facility for inspection and adjustment. All steering wheels have factory-set play within reasonable limits, but exceeding this range will negatively impact vehicle handling.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.