Is it necessary to go to a 4S shop for inspection before driving on the highway?

1 Answers
StKing
07/29/25 11:26am
It is recommended to go to a 4S shop for inspection before driving on the highway. Here are some relevant introductions about driving on the highway: Introduction to the highway: The highway refers to high speed, which is compared to medium speed and low speed. In an environment where low speed is the mainstream, low speed is normal speed or regular speed, while in an environment where medium speed is the mainstream, medium speed is normal speed or regular speed. Precautions for driving on the highway: When driving on the highway, it is necessary to maintain a safe distance from the vehicle in front. When the speed is above 100km/h, keep a distance of more than 100 meters. There are distance confirmation signs on the highway, through which the distance can be confirmed.
Was this review help?
4
0
Share
More Forum Discussions

What Causes the Steering Wheel of Skoda Rapid to Stick?

Skoda Rapid steering wheel sticking may be caused by insufficient power steering fluid, loose power steering pump belt, overly tight steering column screws, or severe damage to the steering gear. Detailed reasons and solutions for Skoda Rapid steering wheel sticking are as follows: 1. For steering wheel sticking, first check if the power steering fluid is insufficient and if the power steering pump belt is loose. Then determine whether the issue lies with the steering gear or the steering wheel itself. If it's the steering wheel, inspect the universal joint beneath it. The steering column screws might be too tight—loosening them could help. Severe damage to the steering gear may require replacement instead of repair. Check for power steering fluid leaks, usually indicated by black oil streaks, and address them promptly by repairing and refilling. 2. If the steering column is sticking, lubrication may be needed, or the floor mat might be obstructing it. To diagnose, disconnect the steering gear and manually rotate the universal joint; if it sticks, replacement is necessary. 3. Steering wheel sticking can range from minor to serious, increasing the risk of accidents in emergencies. It's crucial to take any warning signs from your vehicle seriously, identify and resolve issues promptly to prevent accidents. If you're unable to accurately diagnose the problem, it's advisable to contact your local 4S dealership for inspection and repair.
1
3
Share

What is the fuel consumption of the CFMOTO 650MT?

The comprehensive fuel consumption of the CFMOTO 650MT is 3.37 liters per 100 kilometers. Here is more information about the CFMOTO 650MT: 1. Exterior: Its design was personally handled by KTM designers, featuring a full and compact body with smooth lines. The color scheme and craftsmanship are of high quality, reaching a superior standard. With a seat height of 840mm, it is just right for riders with a height of 170cm to have both feet on the ground. It adopts the latest instrument panel and includes a 12V power socket below. 2. Suspension: The CFMOTO 650MT uses inverted hydraulic front forks and a rear side-mounted independent shock absorber, paired with an aluminum alloy rear swingarm, providing excellent shock absorption. 3. Braking: The CFMOTO 650MT is equipped with wave discs, opposed four-piston calipers from West, and ABS assistance, delivering outstanding braking performance. 4. Power: The CFMOTO 650MT is powered by a 650cc twin-cylinder eight-valve engine, with a maximum power output of 70 horsepower and a maximum torque of 62 Nm. The official 0-200 meter acceleration time is 11 seconds, and the top speed is 170km/h.
15
3
Share

How to Adjust the Focus of LED Headlights on a Car?

Due to design reasons or various factors during modification, LED headlights on cars may suffer from severe light dispersion and lack of focus. Therefore, it is necessary to adjust the angle of the lights to meet the safety needs of the driver. Here is the adjustment tutorial: 1. First, park the car 7.6 meters away from a wall, then turn on the headlights. Next, adjust the light projection position based on the light's position on the wall. Some car models are equipped with a headlight height adjustment knob inside the vehicle. If this function is available, set the knob to the "0" position before adjusting the headlights. 2. Then, mark standard lines on the wall. Measure the distance from the center of the low beam to the car's central axis, the distance from the center of the high beam to the car's central axis, and the distance from the center of the low beam to the ground beforehand. 3. Finally, adjust the corresponding adjustment knobs behind the headlights to align the light position. The parts that need adjustment and the tools required vary by car model, so adjustments should be made according to the specific model. Before adjusting, project the headlights onto the wall and observe whether the light is misaligned, too high, or too low.
14
2
Share

What is the actual fuel consumption of the VS5?

The actual fuel consumption of the VS5 is 7.1 liters per 100 kilometers, which may vary depending on individual driving habits and other factors. Below are the relevant factors that affect the VS5's fuel consumption: 1. The vehicle itself: The VS5 is equipped with a 1.4T turbocharged engine, and its weight means the base fuel consumption is relatively high. The engine's powerful performance also requires higher fuel consumption to sustain. If the car is carrying heavy loads, fuel consumption will increase significantly. Regularly removing unnecessary heavy items from the car is an effective way to reduce fuel consumption. 2. Driving habits: Rapid acceleration and sudden braking in urban driving or speeding can increase fuel consumption by 5% to 30%. Prolonged idling also raises fuel consumption because the vehicle consumes energy as long as it is running. Maintaining a steady speed as much as possible can effectively reduce fuel consumption. 3. External environment: Road conditions affect fuel consumption. Generally, smooth roads are more fuel-efficient than bumpy ones, straight roads are better than winding ones, and open roads are more efficient than congested ones. Driving in suburban areas is more fuel-efficient than in urban areas. Weather and temperature are also significant factors. In summer, hot weather leads to air conditioning use, which consumes additional fuel. In winter, low temperatures prevent gasoline from reaching the optimal combustion temperature, leading to incomplete combustion and higher fuel consumption.
14
2
Share

Which department should I register for a physical examination when renewing my expired driver's license?

No registration is required for the physical examination when renewing an expired driver's license. Below is additional information regarding the physical examination for renewing an expired driver's license: 1. Process: Go directly to a medical institution that can conduct the physical examination for motor vehicle driver's licenses and complete the examination procedures. The physical examination for motor vehicle driver's licenses is free of charge. If the examination cannot be completed during the process, treatment at a hospital is required based on the reason for the failure. 2. Time for renewing the expired license: The renewal time for an expired license is six years after the issuance of the motor vehicle driver's license. After six years, a ten-year valid driver's license is issued, followed by a long-term valid motor vehicle driver's license. No further renewal is required in the subsequent period, but it is important to note that during the usage cycle, no record of 12-point deduction is allowed. 3. Required materials: The necessary documents include the driver's ID card, the motor vehicle driver's physical condition certificate, and a one-inch bareheaded photo of the driver taken within the last six months. These can be submitted to the vehicle management office or the traffic management department of the public security authority, or processed through the mobile app "Traffic Management 12123".
7
2
Share

What is the actual fuel consumption of the Chery Jetour X70 Plus?

The actual fuel consumption of the Chery Jetour X70 Plus is 9.4L/100Km, which may vary due to road conditions and driving habits. Below are the factors that affect the fuel consumption of the Chery Jetour X70 Plus: 1. External Environment: Road conditions influence fuel consumption. Generally, flat roads are more fuel-efficient than bumpy roads, straight roads are more fuel-efficient than winding roads, and smooth traffic is more fuel-efficient than traffic jams. Weather is also a factor affecting fuel consumption. In summer, hot weather leads to increased fuel consumption due to air conditioning usage. In winter, low temperatures prevent gasoline from reaching the optimal combustion temperature, resulting in incomplete combustion and additional fuel consumption. 2. Driving Habits: Sudden acceleration and braking in urban driving and speeding can increase fuel consumption by 5%-30%. Prolonged idling also raises fuel consumption since the vehicle consumes energy as long as it is running. Maintaining a steady speed can effectively reduce fuel consumption. 3. Vehicle Maintenance: Regularly check and adjust tire pressure. Low tire pressure increases the contact area between the tires and the road, raising driving resistance and fuel consumption. Additionally, dirt and grease on the engine surface can hinder heat dissipation, leading to higher fuel consumption. Proper vehicle maintenance is a crucial method for reducing fuel consumption. Regular inspections and maintenance not only lower fuel consumption but also extend the vehicle's lifespan and prevent unexpected issues.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.