Is it necessary to go for the first maintenance at 1000 kilometers?

2 Answers
DeEvangeline
08/30/25 7:36am
Using a new car for three months with a mileage of 1000 kilometers is probably the daily performance of most car owners. At this point, the break-in period has just been completed, and with such low mileage, it is not recommended to perform the first maintenance. Below is relevant information: Depending on the car model: The first maintenance standard for new cars varies by model, with the current minimum threshold being 6 months or 5000 kilometers. You can wait another three months before the first maintenance. However, it is advisable to contact the 4S store's after-sales service in advance, explain the situation, and negotiate the timing of the first maintenance. It is entirely acceptable to appropriately extend the first maintenance time when the mileage is low. Suggestion: If the annual mileage in the future will not exceed the maintenance mileage by much, it is recommended to start with the second maintenance and perform it once a year. For mineral oil, try to maintain maintenance every six to seven months, while semi-synthetic or full-synthetic oil can be extended to about a year. This is based on the condition of low mileage.
Was this review help?
3
0
Share
ValeriaMarie
09/12/25 4:33am
I once encountered minor issues with a new car during its break-in period, and driving 1,000 kilometers for the first maintenance was quite helpful. This is because when a new car is first driven, core components like the engine and transmission are still gradually adapting, and the first maintenance mainly checks whether they are running smoothly. For example, checking if there are metal fragments in the engine oil, inspecting the brake system for wear, and if any abnormalities are found, they can be repaired promptly to avoid costly repairs later. Don’t underestimate this mileage—identifying issues early can protect the car’s lifespan. I also recommend making an appointment with the 4S shop in advance to avoid queues, as time is money. But if you’re driving an ordinary sedan and the manual says maintenance isn’t needed this early, you can first call the shop to ask for their opinion.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

Why does the Audi EPC light come on and then disappear?

Audi EPC light coming on and then disappearing is a condition caused by a fault in the electronic throttle control system. EPC: EPC stands for Electronic-Power-Control, which translates to electronic throttle control system. This is an important controller used to manage engine air intake and engine load. When issues arise, it cannot control engine speed and load, causing the vehicle to enter an emergency state, resulting in engine shaking and, in severe cases, stalling. EPC Light On: When the car's EPC light comes on, there can be various situations, such as faults in the intake system, like leaks or blockages; dirty throttle body, excessive carbon buildup; substandard fuel usage; abnormal cylinder pressure, poor operating conditions; or occasional faults leading to false alarms.
11
0
Share

Which Generation is the 2016 Toyota Camry?

2016 Toyota Camry is the 7th generation. The 2016 Camry comes with three powertrain options: a 2.5L hybrid, a 2.0L naturally aspirated engine, and a 2.5L naturally aspirated engine. The 2.5L hybrid powertrain delivers a maximum horsepower of 160 hp, the 2.0L naturally aspirated engine produces 167 hp, and the 2.5L naturally aspirated engine generates 184 hp. The 2016 Camry 2.5 hybrid is equipped with an E-CVT continuously variable transmission, while other models feature a 6-speed automatic transmission. In terms of suspension, the 2016 Camry has a front MacPherson strut independent suspension and a rear double-wishbone independent suspension.
10
0
Share

How to Deactivate the Anti-lock Braking System?

The anti-lock braking system (ABS) in most civilian vehicles cannot be deactivated. This system is enabled by default and remains on standby at all times unless a malfunction occurs. Whenever the vehicle shows a tendency to lock up, the ABS will intervene to prevent wheel lock. Usage instructions for the anti-lock braking system: 1. Keep the brake pedal firmly pressed to allow the ABS to function effectively; 2. The minimum following distance should not be less than 50 meters. When the speed exceeds 50 km/h, the minimum following distance should match the speed value; 3. Familiarize yourself with the ABS in advance and be prepared for and adapt to the brake pedal pulsation that occurs when the ABS is active.
1
1
Share

Benefits and Functions of Throttle Cleaning

The specific introduction to the benefits and functions of throttle cleaning is as follows: 1. Remove carbon deposits. The benefit of regular throttle cleaning is to remove carbon deposits, improve the precision of air intake and fuel injection, and enhance fuel efficiency. 2. Extend the engine's service life. Not cleaning the throttle for a long time will cause throttle opening errors and allow impurities in the air to enter the engine combustion chamber. 3. Function of the throttle. The throttle is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. The throttle is connected to the air filter at the top and the engine block at the bottom, and is known as the throat of the automobile engine.
5
3
Share

How many cylinders does the Vios have?

The Vios has four cylinders, with the model number 4NR-FE, a bore of 72.5mm, and a compression ratio of 11.5. It is equipped with a 1.3-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine. The 1.3-liter naturally aspirated engine produces 99 horsepower and a maximum torque of 123 Nm, with the maximum torque achieved at 4,200 rpm and the maximum power at 6,000 rpm. This engine is paired with either a 5-speed manual transmission or a CVT transmission. The Vios has a wheelbase of 2,550mm, a length of 4,420mm, a width of 1,700mm, and a height of 1,490mm.
4
1
Share

What is the Function of a Seat Belt?

The function of a seat belt is to instantly tighten and secure the loose belt when a vehicle collision occurs or emergency braking is applied, preventing secondary collisions by firmly restraining the occupant in the seat. If the tightening force of the seat belt exceeds a certain limit, the force-limiting device will appropriately release the belt to maintain stable chest pressure. Methods for using seat belts: 1. The breaking load indicators for the belt, rope, and metal fittings; 2. The waist belt must be a single piece, with a width of 40 to 50mm and a length of 1300 to 1600mm; 3. The protective waist belt should be no less than 80mm in width and 600 to 700mm in length; 4. The safety rope diameter should be no less than 13mm.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.