Is it necessary to file for record when changing dual exhaust to quad exhaust?

Can You Continue Driving with a Tire Pressure of 1.2?

A tire pressure of 1.2 bar is not suitable for normal driving. Vehicles are usually equipped with a tire pressure monitoring system, which typically triggers an alarm when the tire pressure drops below 1.5 bar. Hazards of Low Tire Pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to drifting, posing safety risks; Increases the movement of various parts of the tire, causing excessive rolling and abnormal heat generation; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage, as well as excessive friction between the tire and the rim, damaging the bead area and causing abnormal wear; Multiplies the friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout; Increases tire deformation, making the sidewalls prone to cracking. It also induces flexing movements, leading to excessive heat, rubber aging, fatigue in the cord layers, cord breakage, and enlarges the tire's contact area with the ground, accelerating shoulder wear. Solutions for Insufficient Tire Pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire repair shop promptly for a patch and reinflation; If the tire pressure warning reappears after inflation without any visible puncture, it may be due to air leakage caused by a deformed rim. It is recommended to inspect and replace the rim if necessary.

20

0

Share

What brand of car is the two SS?

SS is the logo of Chevrolet sports cars. The Chevrolet SS adopts MacPherson front suspension and multi-link rear suspension. The high-performance braking kit produced by Brembo includes 355mm ventilated brake discs, four-piston front brake calipers, and two-piston rear brake discs, paired with a sport-tuned electric power steering system. Additional information: 1. Introduction: The Chevrolet SS is a full-size high-performance sedan, offering a increasingly rare fast car formula with a large, simple V8 combined with a manual transmission, driving the rear wheels. Additionally, the SS provides substantial investment in many areas, but the interior is not one of them. The quality of materials used and general assembly and finish do not meet modern standards. As one of Chevrolet's fastest cars, it may adopt a 6.2T supercharged V6 engine to maintain its speed advantage as always. 2. Performance: The Chevrolet SS features MacPherson front suspension and multi-link rear suspension. The high-performance braking kit from Brembo includes 355mm ventilated brake discs, four-piston front brake calipers, and two-piston rear brake discs, paired with a sport-tuned electric power steering system.

7

3

Share

What are the differences between Audi A6 and A8?

Here are the differences between Audi A6 and A8: 1. Exterior: The A8 has a more streamlined appearance, particularly in the rear design, and offers more space than the A6. 2. Interior: The A8's interior showcases high-tech features, while the A6's interior emphasizes technology less. 3. Performance: The base configuration of the A8 matches the highest configuration of the A6, but the A8 is not as comfortable or as user-friendly as the A6. Currently, the A6 in China is available with four gasoline engine options, while the A8's entry-level model only has one. 4. Body dimensions: The A8 measures 5192mm in length, 1894mm in width, and 1455mm in height, with a wheelbase of 3074mm; the A6 measures 5012mm in length, 1855mm in width, and 1485mm in height, with a wheelbase of 2945mm.

15

0

Share

How Many Types of Vehicle Lights Are There?

Vehicles have four types of lights: halogen lights, xenon headlights, LED lights, and laser headlights. The front headlights of a car alternate between low beam and high beam. The low beam is indicated by a green light on the dashboard, while the high beam is blue. Fog lights are also divided into front and rear types. The front fog light symbol points to the left, and the rear fog light symbol points to the right, with different colors for each. Halogen lights emit a yellowish light, with the advantage of strong penetration, providing drivers with good visibility in rain, snow, and fog. Xenon lights produce a pure white light, offering higher brightness, lower power consumption, longer lifespan, and more stable illumination compared to halogen lights. LED lights use cold light sources, resulting in lower energy consumption during conversion. Compared to LED lights, laser headlights are more compact, consume even less energy, and generate light intensity over 1000 times stronger, significantly expanding their illumination range.

6

5

Share

How to Check if the PCV Valve is Good or Bad?

PCV Valve inspection methods are as follows: 1. Keep the engine idling, remove the PCV valve from the cylinder head cover hose, then check if the PCV valve is clogged. Place your hand on the PCV valve interface, and you should feel a strong vacuum suction with your fingers; 2. After reinstalling the PCV valve, remove the crankcase intake pipe from the air filter, then cover the pipe opening with a thin piece of paper. As the pressure in the crankcase decreases, the paper should be noticeably sucked towards the pipe opening. After the engine stops running, remove the PCV valve and shake it by hand to check. If you hear a clicking sound, it indicates that the PCV valve is flexible and usable.

20

4

Share

What is the situation when the production dates of the glass on a new car are inconsistent?

It is normal for the production dates of the glass on a new car to be inconsistent. The glass is assembled by the car manufacturer, and the assembly time depends on when the glass is delivered by the glass factory. The glass on a single car may be delivered by the glass factory at different times. If there is a quality issue with the glass, the inconsistent production dates can serve as valid evidence of the glass quality. Methods to determine whether the car glass has been replaced: 1. Check the glass label—original factory glass labels have the car brand logo and the glass brand logo; 2. Check the production date—normally, the production dates of all the glass on the car should be close to the vehicle's production date; 3. Check the manufacturer—by reviewing the manufacturer code on the glass, you can identify which company produced the glass; 4. Inspect the appearance—determine whether the glass has been replaced by observing the glass and its surrounding appearance.

12

0

Share

Is it necessary to file for record when changing dual exhaust to quad exhaust?

Can You Continue Driving with a Tire Pressure of 1.2?

What brand of car is the two SS?

What are the differences between Audi A6 and A8?

How Many Types of Vehicle Lights Are There?

How to Check if the PCV Valve is Good or Bad?

What is the situation when the production dates of the glass on a new car are inconsistent?

What are the causes of abnormal noise in the Vios transmission?

What are the reasons for the burnout of the automotive air conditioning compressor coil?

What is the function of idle-up in Toyota?

What are the penalties for not wearing a seat belt?