Is it necessary to fasten the seat belt for Subject 2?

2 Answers
OCamille
07/24/25 10:07pm
Yes, if you forget to fasten the seat belt when getting in the car, you will be directly deducted 100 points and fail the exam. Below is some information about the Subject 2 exam: Passing criteria: The full score is 100 points, with evaluation standards set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. For applicants of large buses, trailers, city buses, medium-sized buses, and large trucks, a score of 90 is required. For other vehicle types, a score of 80 is required. Score confirmation: If you fail the Subject 2 exam on the first attempt, you can retake it once. If you do not participate in the retake or still fail the retake, the exam process will be terminated, and the applicant must reschedule the exam after ten days.
Was this review help?
2
0
Share
MacMaggie
08/10/25 2:53pm
I still vividly remember my training for the driving test's Subject 2. The instructor always emphasized that the seatbelt must be fastened. If you didn't buckle up before starting, you'd immediately lose points or even fail the test. I recall one mock exam where I was so nervous that I forgot to fasten it—the moment I started the car, the instructor stopped me and made me start over. The seatbelt isn't just a test requirement; it's a core safety habit for driving. During Subject 2 exercises like reverse parking or hill starts, the car might slide or have minor bumps—wearing a seatbelt prevents injuries from hitting the steering wheel. My advice is to take a deep breath before getting in the car and remind yourself to buckle up. Over time, it'll become second nature, helping you prioritize safety in real road conditions too. Develop good habits, and the test will go smoothly.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Which district in Shanghai does Hu G belong to?

Hu G is a license plate for the urban area of Shanghai. Here is the relevant information: 1. The urban area mainly includes the following districts: Huangpu District, Xuhui District, Changning District, Jing'an District, Putuo District, Zhabei District, Hongkou District, and Yangpu District. The suburban areas mainly include: Nanhui District, Jinshan District, Fengxian District, Songjiang District, Qingpu District, Jiading District, and Chongming District. 2. Shanghai license plates range from Hu A to N, among which Hu C is special as it is a dedicated license plate for suburban counties in Shanghai. Vehicles with this plate can only drive in areas outside the outer ring road and are not allowed to enter the urban area. Other plates such as Hu A, Hu B, Hu D, Hu E, Hu F, Hu G, Hu H, Hu J, Hu K, Hu L, Hu M, and Hu N are all the same.
7
2
Share

How to Check the Manufacturing Date of Car Glass?

Car glass production date can be checked by looking at the trademark in the corner of the glass, which consists of several dots and a number. The number represents the production year of the car glass. If the dots are on the left, it indicates the first half of the year, while dots on the right indicate the second half of the year. Additional details: 1. First, the number is the production year of the glass, representing the last digit of the year. This must be determined based on the vehicle's manufacturing date. If the vehicle was manufactured in 2007 or 2008, then the glass year number '8' would correspond to 2008. The difference between the glass and vehicle production dates should not exceed 10 years. 2. The small black dots indicate the production month of the glass. If you observe other car glasses carefully, you will notice that some glasses have the black dots before the number, while others have them after the number. If the black dots are before the number, subtract the number of dots from 7. If the black dots are after the number, subtract the number of dots from 13. The result will give you the production month of the glass.
19
4
Share

Where to Turn Off the Wiper?

OFF is the stop position for the front wiper, which means the wiper is turned off when rotated to this position. Here is some relevant information: 1. Generally, there is a wiper control knob on the car's combination switch handle, with three settings: low speed, high speed, and intermittent. The top of the handle is the washer button switch; pressing it sprays washer fluid to clean the windshield in conjunction with the wiper. The washer system is a common feature in cars, consisting of a reservoir, pump, hose, and nozzles. 2. The reservoir is typically a 1.5-liter to 2-liter plastic tank, and the pump is a miniature electric centrifugal pump that delivers washer fluid from the reservoir to the nozzles. Through the action of 2 to 4 nozzles, the washer fluid is divided into fine jets directed at the windshield, working with the wiper to clean the windshield.
14
5
Share

How long does it take to repair a bumper?

Replacing a bumper takes two to four days. If you need to wait for parts, it will take longer. The repair can be completed in two days if done quickly, because painting the bumper takes up a significant amount of time. The car bumper, also known as the car's anti-collision beam, has the ability to reduce injuries to passengers during high-speed impacts. Front and rear bumpers not only serve a decorative function but, more importantly, protect the car body and ensure the safety of passengers inside the vehicle. The methods for repairing a bumper are as follows: Cracks: Assess the cracks to confirm the repair location. Use a plastic welding gun to heat and weld the backside of the crack. During the heating process, be careful to move the welding rod slowly along the crack. Deformation: Use a heating machine to repair the deformed area by directly fusing the metal in that section. Once cooled, the process is complete.
8
3
Share

What's the matter with the reversing camera not responding?

Solutions for sudden failure of the car reversing camera to display: Camera malfunction: You can purchase and install a new one. When buying, it's best to choose one with an illumination power supply so it can be seen at night. Loose power cable: This can cause power supply issues for the camera. Simply plug the power cable back in. Also, check the plug for any water marks, as power supply problems are often caused by short circuits due to water. Broken wire: You can use sealant to fix it and ensure it's securely fastened to avoid being pinched off during driving. Display screen: If there's an issue with the display screen, the reversing image will definitely not be visible. Therefore, carefully check the power supply of the display screen, whether it's broken, or if the surrounding wires are loose.
11
4
Share

How about the Pirelli P8 tires?

Here is a detailed explanation of the Pirelli P8 tires: It enhances the driving experience and hydroplaning resistance in wet conditions, especially optimizing wet braking performance, reducing the 100-0km/h braking distance by 4 meters. The innovative technology introduced by Pirelli engineers also improves acoustic comfort (thanks to lower road noise) and driving comfort. The tires can absorb more road noise: the tire lifespan is increased by 6%, allowing drivers to travel longer before needing a replacement. The new Cinturato P7 (second generation) improves fuel efficiency, reducing rolling resistance by one level—12% lower, saving 4% in fuel consumption (under the WLTP cycle for light vehicles), and reducing CO2 emissions. It incorporates Pirelli's specialized technologies: such as RunFlat and SealInside, which enable drivers to continue driving for a certain distance even after a puncture. This tire also offers an Elect version, specifically designed by Pirelli for pure electric and plug-in hybrid vehicles.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.