Is it necessary to fasten seat belts in the back seat of a car on the highway?

Can I renew my driver's license if it has expired for a few days?

If your driver's license has expired for a few days, you can still renew it normally as long as it hasn't exceeded one year. Renewal time regulations: If expired for less than one year, normal renewal is possible; if expired between one to three years, the license will be canceled but can be renewed by passing the subject one exam; if expired for over three years, the license becomes invalid and cannot be renewed. The renewal process for a driver's license expired for a few days is the same as the normal renewal process. The motor vehicle driver should bring the required materials to the vehicle management office at the license issuance location to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Besides applying at the vehicle management office, you can also renew through the following methods: Renewal via the "Traffic Management 12123" APP. Download the app, select Service Center -- Expired License Renewal Service -- fill in the information. The new license is generally delivered by mail. Visit the "Police-Medical-Post" service point at a postal office for renewal. The entire process from registration, medical examination to new license production takes only half an hour. Currently, only a few cities offer this service, such as Hangzhou.

2

3

Share

Are headlights the same as low beams?

Headlights are not just low beams; they include both low beams and high beams. Headlights are the main lights at the front of a vehicle, and their illumination directly affects nighttime driving operations and traffic safety. Automobile headlights generally consist of a light source (bulb), reflector, lens (diffuser), and housing. To ensure safe nighttime driving, headlights should provide bright and uniform illumination ahead, enabling the driver to identify any obstacles on the road at a distance of 100 meters (or more). Headlights should also be equipped with anti-glare devices to prevent dazzling other drivers and causing accidents during nighttime driving. Low beams are designed for close-range illumination, with the primary requirements being a wide coverage area and a short illumination distance. Low beams are typically composed of the lights on both sides of the front of the vehicle. Low beams should be used in the following situations: on roads without central barriers or centerlines; when meeting another vehicle at night, switch to low beams when the oncoming vehicle is within 150 meters; and when driving at night in conditions with no streetlights, poor lighting, or low visibility due to fog, rain, snow, dust, or hail. High beams are used to extend visibility distance or improve visual clarity. Therefore, they are typically used for extended periods only on roads without streetlights or under poor lighting conditions.

2

1

Share

Can You Turn Left at a Red Light?

Generally speaking, you can turn left at a red light. However, there are some special circumstances where left turns are not allowed. Normal circumstances: If the center line of the road is a double yellow line (one solid and one dashed), and there are no signs prohibiting left turns or U-turns, vehicles on the dashed line side can turn left or make a U-turn without regard to whether the light is red, as long as it is safe and does not impede traffic. At intersections with signs indicating 'U-turn permitted on red light,' left turns or U-turns are allowed when the light is red. Special circumstances: Without any special indications, even in a left-turn lane, you cannot turn left at a red light. Otherwise, you may be fined 200 yuan and penalized with 6 demerit points for running a red light. Running a red light requires the electronic eye to capture three photos: the vehicle crossing the stop line, the vehicle in the middle of the intersection, and the vehicle reaching the opposite side of the intersection. Only with these three photos will it be considered running a red light. Therefore, if you see a red light while turning left, do not proceed further. If the third photo is not captured, it will not be considered running a red light. However, you must not stop on the crosswalk, or you will be fined 200 yuan and penalized with 3 demerit points. If only the front of the vehicle slightly crosses the stop line, it will not be considered running a red light, and no penalty will be imposed.

10

2

Share

Is 2000 lumens sufficient for LED car lights?

LED car lights with 2000 lumens may not be sufficient. Meaning of lumens: Lumens are the unit of luminous flux. In principle, the greater the luminous flux, the better. However, increasing luminous flux is achieved by increasing current, which can lead to two negative effects: higher current can easily cause light decay, and increased flux can reduce color rendering. These two indicators are the most critical metrics for evaluating the quality of LEDs. Choosing LED car lights: The important factors for LED car lights are brightness, light pattern, color temperature, and heat dissipation. Brightness is determined by the LED chips; high-quality chips ensure good luminous efficiency and brightness with higher lumens. LED car lights use LEDs (light-emitting diodes) as the light source. Due to their high brightness, rich color variety, low power consumption, and long lifespan, LEDs are widely used in the automotive field. Common external car lights include: headlights, fog lights, license plate lights, reverse lights, brake lights, turn signals, position lights, clearance lights, parking lights, warning lights, and daytime running lights.

11

2

Share

What brand of audio system does Lexus often use?

Lexus often uses Mark Levinson audio systems. Lexus is a brand under Toyota, and it is a rear-wheel-drive B-class sedan with a wheelbase of 2800 mm, length of 4680 mm, width of 1810 mm, and height of 1430 mm. The body structure is a three-box sedan. Lexus uses a 2.0-liter turbocharged engine, model 8AR-FTS, with a maximum power of 180 kW, torque of 350 Nm, maximum power speed of 5800 rpm, and maximum torque speed ranging from 1650 to 4400 rpm.

15

3

Share

How to Connect CarPlay in Lexus?

Methods to connect CarPlay in Lexus: 1. Users connect their iPhone to the car via USB, and a handshake icon will appear on the screen; 2. Long-press the virtual Home button on the CarPlay interface to activate iOS's voice assistant Siri, then give voice commands directly. Lexus is manufactured by Toyota Motor Corporation of Japan. Taking the Lexus ES as an example: it is a mid-to-large-sized sedan with exterior dimensions of 4975mm in length, 1866mm in width, and 1447mm in height, a wheelbase of 2870mm, a fuel tank capacity of 60.6 liters, and a minimum trunk volume of 454 liters.

7

5

Share

Is it necessary to fasten seat belts in the back seat of a car on the highway?

Can I renew my driver's license if it has expired for a few days?

Are headlights the same as low beams?

Can You Turn Left at a Red Light?

Is 2000 lumens sufficient for LED car lights?

What brand of audio system does Lexus often use?

How to Connect CarPlay in Lexus?

Are 2.75-10 and 3.0-10 interchangeable?

What are the differences between Jianghuai Ruijie and Cummins engines?

What is the difference between ID.6 CROZZ and ID.6 X?

Is it normal for tire pressure to drop when the weather gets cold?