Is It Necessary to Drive on the Highway After Adding Fuel Additive?

1 Answers
Ashlyn
07/25/25 10:43am
It is not necessary to drive on the highway immediately after adding fuel additive. Letting the additive sit for a few days to mix more evenly with the gasoline is sufficient, and you can drive on the highway when the opportunity arises later. For new vehicles with less than 20,000 kilometers on the odometer, adding fuel additive is unnecessary. For vehicles exceeding 20,000 kilometers, it should be added as needed, typically one small bottle per tank of fuel. The precautions for using fuel additive are as follows: Increased carbon deposits in the combustion chamber: Long-term use of fuel additive can be harmful to the engine. Excessive use can increase carbon deposits in the combustion chamber, and if overused for an extended period, it may even cause engine knocking, detonation, and worsen vehicle exhaust emissions. Driver's driving habits: Cars frequently driven at low speeds in urban areas with frequent stops and starts are prone to engine carbon buildup. If a car often drives on highways, carbon deposits are less likely to form, and even if the mileage exceeds 200,000 kilometers, fuel additive may not be necessary. Many drivers tend to accelerate and brake aggressively, which increases fuel consumption, and using fuel additive cannot compensate for these poor driving habits.
Was this review help?
10
4
Share
More Forum Discussions

Detailed Explanation of Letters on Vehicle Ignition Switch

Different letters on vehicles represent distinct meanings. Here is a detailed explanation of the letter designations on vehicles: 1. B+ or B or +: Generator positive output terminal, the positive terminal after rectification of the generator stator output. Connects to the battery positive terminal, voltage regulator, and vehicle electrical loads (no battery motor). B+ directly connects to the air conditioning system. 2. F+ or F or D: Field terminal, connected to the "field" terminal of the voltage regulator, used for generator rotor excitation. 3. B- or E: Generator negative output terminal after rectification of the stator output, connected to the battery negative terminal and regulator negative terminal, usually directly grounded. 4. N or P or W or R or L: Generator neutral point output terminal, output voltage is half of B+, connected to the tachometer, charging indicator light, relays, etc.
7
4
Share

Where is the fuse box of Wuling Sunshine located?

The fuse box of Wuling Sunshine is located under the dashboard on the driver's side and under the car's engine hood. The car fuse box is a key component in the electronic control system of automobiles, and it is also one of the parts with higher technical content and stricter process requirements in the vehicle body. The car fuse box is used to install car fuses, and it can be divided into small-size car fuse boxes, medium-size car fuse boxes, and large-size car fuse boxes according to the size of the fuses installed. The general injection molding material for fuse boxes is PBT engineering plastic, and the high-temperature resistance varies depending on the material. The dimensions of Wuling Sunshine are 3695mm in length, 1495mm in width, and 1860mm in height, with a wheelbase of 2500mm, and it adopts rear-wheel drive.
2
3
Share

What is the compass in the middle of a Porsche used for?

The compass on a Porsche is used to determine direction and survey terrain. The red triangle on the compass remains fixed, and the corresponding directional letter aligned with the red triangle indicates the current heading of the vehicle, serving as a compass function. The LCD screen in the middle of the compass displays the current interior temperature, current time, or can be set to show directional degrees. The Porsche compass is an original German imported component and requires specialized Porsche diagnostic computer programming to function. The compass features degree markings representing direction, a red triangle indicator, directional letters, and a central LCD screen. The red triangle remains fixed, and the corresponding directional letter aligned with it indicates the current vehicle heading, serving as a compass. The LCD screen in the middle of the compass displays the current interior temperature, current time, or can be set to show directional degrees. Direction indicators: E stands for East, ES for Southeast, S for South, SW for Southwest, W for West, NW for Northwest, N for North, NE for Northeast.
9
0
Share

What Causes the Car's Cooling Fan to Stop Working?

Car's cooling fan not working may be caused by a clogged air filter, lack of coolant, or a blocked heater core. First, check if the air filter is clogged. A non-functioning cooling fan can lead to an increase in the engine's water temperature. Modern cars use electronically controlled cooling fans that operate only when the water temperature reaches a certain level. If the water temperature meets the requirement but the cooling fan still doesn't work, it may indicate a faulty relay or a malfunctioning thermostat switch, which can also affect the cooling fan's operation. Therefore, regular inspections are necessary. A damaged water temperature relay is usually due to poor wiring contact or a malfunction. If there's no response, the relay should be replaced directly. A faulty thermostat switch can cause the car's water temperature to rise and prevent the cooling fan from receiving power properly.
13
0
Share

How many cylinders does the Volvo S60 have?

The Volvo S60 is equipped with a four-cylinder engine. Additional details are as follows: 1. The entire lineup of this model uses a 2.0-liter four-cylinder turbocharged engine, which delivers a maximum power of 163 horsepower and a peak torque of 265 Nm. 2. Turbocharging primarily enhances engine output by increasing air intake through the turbocharger, thereby boosting power and torque. 3. The Volvo S60 offers three variants of engines: a low-power 2.0-liter turbocharged engine, a medium-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. 4. All three engines are paired with an 8-speed automatic transmission from Aisin. The Volvo S60 features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
15
2
Share

What is the difference between Veyron and Weiron?

There is no difference between Veyron and Weiron. Veyron and Weiron are the same car model. When this car was introduced to the domestic market for sale, the name Weiron had already been registered by another company, so Bugatti had to rename it as Veyron. Therefore, Veyron is called Weiron in the domestic market. Veyron is a hypercar under Bugatti, with a wheelbase of 2710 mm, and its length, width, and height are 4470 mm, 1990 mm, and 1210 mm respectively. Veyron is a two-door, two-seater sports car, equipped with an 8.0-liter quad-turbocharged W16 engine. This engine delivers 1001 horsepower and a maximum torque of 1250 Nm, with the maximum torque available between 2200 to 5500 rpm and the maximum power at 6000 rpm.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.