Is it necessary to display the vehicle insurance sticker?

1 Answers
McAlexandra
07/30/25 1:30am
In 2021, vehicle insurance stickers are no longer required to be displayed; only the annual inspection sticker needs to be affixed. All vehicles driven on the road should place the inspection sticker in a conspicuous position on the upper right corner of the front windshield. Failure to display the annual inspection sticker as required will result in a penalty of 1 demerit point and a fine of 50 yuan when driving on the road. Below is an introduction to vehicle insurance stickers: 1. The electronic insurance policy is a digital document issued by the insurance company to the policyholder, proving the existence of the motor vehicle insurance contract in electronic form, including commercial vehicle insurance electronic policies and compulsory traffic insurance electronic policies. The electronic compulsory traffic insurance sticker has the same legal effect as traditional paper policies. 2. All compulsory traffic insurance stickers have been replaced with electronic versions. After purchasing vehicle insurance, there is no need to go to the insurance company to collect the insurance policy certificate. For claims, only an ID is required for processing, and there is no need to display the compulsory traffic insurance sticker on the windshield. 3. The compulsory traffic insurance stickers are all marked with "Supervised by the China Insurance Regulatory Commission." The policy is brown, with main text printed using internationally advanced red fluorescent anti-counterfeit ink. The horizontal lines under the text are composed of microprinted characters, providing good anti-counterfeit performance. Except for the area reserved for printing the company logo of different operating companies, the policies have uniform specifications and formats nationwide.
Was this review help?
17
1
Share
More Forum Discussions

What is the fuel tank capacity of the 2014 Buick Regal?

2014 Buick LaCrosse has a fuel tank capacity of 70 liters, using No. 92 or above unleaded gasoline. It is a mid-size car under SAIC-GM Buick. Among similar models, the Magotan has a fuel tank capacity of 66 liters, and the Audi A4 has a fuel tank capacity of 65 liters. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, also check if the vent holes are clear. The filter screen at the fuel filler port should be kept intact to prevent impurities from entering the fuel tank during refueling and clogging the fuel lines. The sealing gasket of the fuel filler cap should also be intact to prevent fuel from overflowing during driving.
5
0
Share

What type of engine oil is used in the Great Wall Pao diesel version?

The Great Wall Pao diesel version uses engine oil with the specification 5W-40. Engine oil, also known as motor lubricant, serves multiple functions such as lubrication to reduce friction, assisting in cooling, sealing to prevent leaks, rust and corrosion prevention, and shock absorption. Usage scenarios for different engine oil specifications: High-temperature types for summer use: 20, 30, 40, 50. The larger the number, the higher the viscosity, and the higher the maximum applicable temperature. Low-temperature types for winter use: 0W, 5W, 10W, 15W, 20W, 25W. The 'W' stands for Winter, and the smaller the number before 'W,' the lower the low-temperature viscosity and the better the low-temperature fluidity, making it suitable for lower minimum temperatures. All-season types for both winter and summer use: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, 10W-50, etc. The smaller the number before 'W,' the lower the minimum applicable temperature, and the larger the number after the hyphen, the higher the maximum applicable temperature.
16
3
Share

Can Wheel Hub Bolt Patterns Be Modified If They Are Different?

Wheel hub bolt patterns cannot be modified if they are different. When replacing wheel hubs, the bolt pattern values must be identical for the modification to be feasible. If the wheel hub's bolt pattern does not match the car's specifications and there is no access to a professional machining center or specialized bolt pattern drill bits, the drilled holes may not fit properly. Additionally, drilling extra holes in the wheel hub could compromise its strength, creating potential safety hazards. Methods for maintaining wheel hubs include: 1. Choosing the right cleaning agent—household cleaners and common dishwashing detergents on the market, being either alkaline or acidic, can be highly corrosive to the wheel hub surface. Opt for neutral soapy water for cleaning to avoid exposing the wheels to strong chemicals; 2. Avoid cleaning when the wheel hub is too hot—never use cold water directly to clean a hot wheel hub. Wait for it to cool down naturally; 3. Develop good driving habits—pay attention to low obstacles on the road during daily driving and avoid parking too close to the curb.
9
1
Share

Is Annual Inspection Still Required for a Long-Term Valid Driver's License?

Even if a driver's license is long-term valid, it still requires an annual inspection, unless the vehicle has no demerit points recorded within a scoring cycle, in which case the inspection for that cycle can be waived. Additionally, holders of a C1 long-term driver's license who have not accumulated more than 12 demerit points within a scoring cycle are also exempt from the inspection for that cycle. Relevant details are as follows: 1. License Renewal: If a driver has not reached 12 demerit points in any scoring cycle during the 6-year validity period of their driver's license, they can renew it for a 10-year validity period. Similarly, if they maintain this record during the 10-year validity period, they can renew it for a long-term valid driver's license. When renewing the driver's license, the traffic management department of the public security authority must conduct an inspection. 2. Inspection: Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks must undergo an inspection at the traffic management department of the public security authority within 30 days after the end of each scoring cycle. However, if there are no demerit points recorded within a scoring cycle, the inspection for that cycle is waived.
8
4
Share

Differences Between Longitudinal and Transverse Engine Layouts?

The main differences between longitudinal and transverse engine layouts are as follows: 1. Different engine position layouts. 2. Due to the different layouts, the optimal power output direction of the engine varies. 3. Because of the above two characteristics, their best applications and matching methods differ. 4. Transverse engines have a simpler structure, lower cost, and can expand the passenger compartment space, while longitudinal engine cars offer higher driving pleasure, better handling, and superior driving feel. 5. Transverse engine cars have poorer handling and lower driving pleasure. Longitudinal engines encroach on passenger compartment space and also come with higher costs.
17
0
Share

What is the fuel tank capacity of the 2016 Geely King Kong?

The 2016 Geely King Kong has a total of 50 models, all with a fuel tank capacity of 45 liters. The vehicle is equipped with either a 1.5L or 1.8L naturally aspirated engine, paired with either a 5-speed manual transmission or a 4-speed automatic transmission. During the actual refueling process, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F'. When the needle is near 'E', it indicates low fuel, and when it is close to 'F', it means the fuel level is sufficient.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.