···
Log in / Register

Is it necessary to display the annual vehicle inspection sticker?

3 Answers
DelTessa
07/29/25 3:01pm
It is mandatory to display the annual vehicle inspection sticker. Currently, the annual vehicle inspection and environmental protection test have been combined into one. As long as the vehicle passes the annual inspection, there is no need to obtain a separate environmental protection sticker. Only the inspection compliance sticker and compulsory insurance sticker are required to be displayed on the vehicle. The annual inspection sticker must be displayed; otherwise, the vehicle may be inspected at any time. Annual vehicle inspection is a mandatory test for all vehicles that have obtained formal license plates and registration certificates. It is an annual physical examination of the vehicle according to the technical conditions for safe operation of motor vehicles. Vehicle annual inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. According to relevant regulations issued by the Ministry of Public Security and the General Administration of Quality Supervision, non-commercial passenger vehicles and other small and mini passenger vehicles (excluding vans and vehicles with 7 or more seats) within 6 years enjoy an exemption policy from inspection.
Was this review help?
19
3
Share
OAnderson
08/13/25 7:39am
The annual vehicle inspection decal indeed needs to be affixed to the windshield. Back when I first started driving, everyone took this matter seriously because traffic police could instantly spot the decal during random checks to confirm your vehicle had passed inspection. If not displayed, you risk a 200 yuan fine or even penalty points – a waste of both time and money. Some regions have begun adopting electronic versions, but most cities still require physical display since digital systems aren't fully implemented yet. I recommend drivers affix it immediately after inspection to avoid forgetfulness causing issues. Regular vehicle safety checks are crucial, and this decal serves as a reminder for timely inspections, ensuring smooth driving while protecting yourself and others. When applying it, choose the top-left corner of the windshield after thorough cleaning to prevent detachment or smudging that might hinder identification. In short, developing good habits prevents mistakes – safety always comes first.
Was this review help?
5
2
Share
Expand All
LaEliza
10/11/25 6:02am
Nowadays, it's mandatory to display the annual inspection sticker when driving. Personally, I always stick mine on immediately after each inspection because driving without it could easily get you pulled over by traffic police - you might receive a warning at best or face fines at worst, and who has time for that? Electronic stickers are being piloted in cities like Beijing, Shanghai, and Guangzhou, but in smaller towns, traditional paper stickers are still more reliable. There's a proper way to place it - usually on the upper right corner inside the windshield, making sure not to obstruct the driver's view by placing it too close to the edge. The key is not to wait until the police remind you; put it on as soon as you get the inspection certificate, ensuring it's clearly visible. If the sticker gets damaged or lost, you must get it reissued and reapplied immediately. This is also important for daily driving safety - having it displayed proves your vehicle meets inspection standards, making highway trips or passing checkpoints much smoother. In short, don't slack off - get it stuck on right away.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What Type of Engine Oil Should Be Used for the Great Wall Pao?

The original engine oil used for the Great Wall Pao is of the type 5W-30. In terms of suitability, the original oil is more compatible with the engine. However, depending on different needs, engine oils can offer additional benefits such as noise reduction, fuel efficiency, and enhanced performance. Therefore, you can also choose engine oils from brands like Mobil, Shell, and Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the vehicle. The latter number represents the kinematic viscosity of the oil at 100°C. The higher this number, the better the oil can maintain its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Great Wall Pao is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passages to drain out. Use a special wrench to remove the oil filter. Apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container. Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If there are leaks, they should be repaired. After stopping the engine, pull out the oil dipstick to ensure the engine oil level is within the standard range.
16
1
Share

Can the third-generation Haval H6 not insert a USB drive?

The third-generation Haval H6 can insert a USB drive. Here is the relevant introduction: 1. Haval: Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, mainly focusing on SUV models, operates in parallel with the Great Wall brand, using independent logos, and has separate product development, production, service, and other systems, mainly engaged in SUV production and sales. It includes three car series: H series, M series, and F series. 2. USB drive: A USB drive is the abbreviation for USB flash drive, also called "U disk" according to homophony. A USB drive is a type of flash memory, so it is sometimes called a flash drive. The biggest difference between a USB drive and a hard disk is that it does not require a physical drive, is plug-and-play, and its storage capacity far exceeds that of a floppy disk, making it extremely portable.
17
4
Share

How long does it take for a 4S shop to perform touch-up painting?

For minor touch-up painting at a 4S shop, it takes 3-4 hours; for severe cases, it takes 5-6 hours. Below are solutions to common touch-up painting issues: 1. Loss of gloss: Use a high-speed polishing machine with a specialized polishing compound to restore the finish, and the gloss loss will not recur. 2. Reaction (paint lifting): Chemical reactions during painting can occur due to wet spraying on an undercoat that is not dry, previous use of spray paint, or application of low-quality paint, leading to paint lifting. If paint lifting occurs, first dry the affected area with an iodine tungsten lamp, then smooth the lifted area with P1500-P2000 wet sandpaper. After drying, proceed with applying the color paint. If the reaction persists, completely remove the original paint, redo the undercoat, and then proceed with painting.
9
2
Share

What are the methods for detecting leaks in car air conditioning systems?

There are several methods for detecting leaks in car air conditioning systems, including the visual inspection method. Below is an introduction to the leak detection methods: 1. Visual Inspection Method: Since refrigerant and compressor oil are mutually soluble, oil traces will appear at the leak site. However, slight oil traces at the compressor shaft seal are normal. 2. Soap Water Leak Detection Method: During inspection, clean the suspected parts and apply soap water to potential leak areas. If there is a leak, bubbles will appear. This method can use specialized commercial bubble detection solutions or homemade soap water solutions. 3. Dye Leak Detection Method: Add refrigerant with dye to the system, and color traces will be clearly visible at the leak site. The dye solution is usually red. Introduce the dye into the air conditioning system through the filling port, then run the system for a while. If there is a leak, red dye will leave stains on joints or components.
14
3
Share

What is the 0-100 km/h acceleration time of the Kawasaki 650?

The 0-100 km/h acceleration time of the Kawasaki 650 is 4 seconds. Kawasaki is a manufacturer from Japan that not only produces motorcycles but is also involved in many other fields. Kawasaki is a company with strong technical capabilities. The Kawasaki 650 is equipped with a 649cc twin-cylinder four-stroke liquid-cooled engine. Relevant information about 0-100 km/h acceleration is as follows: 1. Introduction: 0-100 km/h acceleration refers to the time it takes to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a vehicle's power. 2. Notes: Manufacturers usually indicate the official 0-100 km/h acceleration time in the vehicle's promotional materials, but the actual test results will differ from the official figures. This is because different environmental temperatures, road conditions, vehicle wear conditions, and even the amount of remaining fuel in the tank can affect the test results. Therefore, there are no two identical acceleration test results.
4
3
Share

The Real Fuel Consumption of Lynk & Co 02 Owners?

The Lynk & Co 02's fuel consumption per 100 kilometers varies depending on the powertrain: 5.8-6.4L for the 1.5T model and 6.7-6.8L for the 2.0T model under working conditions. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The car consumes the most fuel during low-speed starts, so gently pressing the accelerator to prevent excessively high RPM can effectively lower fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel usage. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid emergency braking: Anticipating road conditions not only enhances driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.