Is It Necessary to Clean the Intake System?

1 Answers
Ricardo
07/29/25 10:19pm
It is necessary to clean the car's intake system. The specific reasons are as follows: 1. Cleaning the intake system is essential. If left untreated for a long time, you may notice increased fuel consumption, unstable idling, and significantly reduced performance during rapid acceleration. It is recommended to inspect the throttle every two maintenance cycles and clean it promptly if needed. 2. To improve efficiency, non-disassembly cleaning methods are now commonly used. While the engine is running, a combustible cleaning agent is injected into the intake pipes, which can remove carbon deposits to some extent. However, due to the length of the intake pipes and varying temperatures in different sections, the form and nature of carbon deposits differ, making it difficult to thoroughly clean with a single cleaning agent. 3. Note that since these non-disassembly cleaning agents are highly flammable and hazardous, and there are many precautions to consider during operation, using incorrect or counterfeit products, or improper handling, can easily lead to accidents. Severe cases may result in engine damage or even fires. Therefore, it is crucial to use products from reputable suppliers through official channels to ensure engine safety and protect your rights.
Was this review help?
18
3
Share
More Forum Discussions

Where is the Mondeo mechanical keyhole?

The Mondeo mechanical keyhole is located on the door handle, and the small cover next to it can be pried open. Then take out the mechanical key, insert the key to hold it in place, and remove the lock cover by pressing in the direction of the arrow to reveal the keyhole. First, press the key against the hole, then grip the white cover and slide it out in the direction of the arrow. After that, you will see a lock cylinder; insert the key and turn it to unlock. Below is a detailed introduction to the Mondeo: 1. The Ford Mondeo, as Changan Ford's flagship model with the highest technological content and finest manufacturing craftsmanship, not only incorporates multiple innovative technologies but also achieves comprehensive improvements in premium quality, powertrain, and safety performance. 2. The new Mondeo adopts Ford's latest family-style exterior design, with the most striking features being the catfish-mouth grille and dual chrome crossbars. The entire lineup is equipped with LED headlights, which includes not only LED daytime running lights but also LED headlight sources. The side profile of the new-generation model is actually quite similar to the current Mondeo Zhisheng, but the new model features more sharply defined upper and lower door character lines, giving it a lower center of gravity. 3. In terms of safety features, the new car comes standard with a body stability control system, traction control system, hill-start assist, electronic differential lock, front dual airbags, side airbags, side curtain airbags, and knee airbags. Additionally, the flagship model is equipped with high-tech features such as adaptive cruise control, lane-keeping assist, and a low-speed safety system.
9
1
Share

What is the correct sequence for starting a car?

Whether it's a manual or automatic transmission car, the starting sequence involves first starting the engine, turning on the left turn signal, releasing the clutch, pressing the accelerator pedal, and smoothly starting the vehicle. Here is some relevant information about automatic transmissions: 1. Introduction: An automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as: P, R, N, D, S, L. 2. Working Principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Regardless of whether it's a manual or automatic transmission, the more gears there are, the more fuel-efficient the vehicle tends to be.
13
1
Share

Can You Change Lanes Over a Solid White Line on the Highway?

No, the function of lane dividing lines is to separate traffic flows moving in the same direction, typically marked with white dashed or solid lines, or yellow dashed or solid lines. Below is an introduction related to highways: 1. Introduction to Highways: Highways refer to high-speed roads, compared to medium-speed and low-speed roads. In environments where low-speed is the norm, low-speed is considered the standard or normal speed, whereas in environments where medium-speed is the norm, medium-speed is considered the standard or normal speed. 2. Precautions Before Entering a Highway: Pay attention to checking weather and road conditions, conduct a safety inspection of the vehicle, study the driving route in advance, carry a vehicle breakdown warning sign and a fire extinguisher, and plan the driving and rest schedule in advance.
19
1
Share

How much over the speed limit is acceptable?

Exceeding the speed limit by 10% is generally acceptable. Below are the hazards of speeding: 1. Vehicle steering becomes unstable: Speeding increases the airspeed difference between the top and bottom of the vehicle body. This differential creates an upward lift force, reducing the vehicle's stability during driving, which is one of the main reasons for unstable steering. 2. Driving habits intensify: The faster the speed, the stronger the vehicle's inertia to maintain straight-line movement, leading to poorer directional control and significantly increased risk. If an emergency occurs ahead, it becomes very difficult to control the vehicle within a short time, potentially resulting in unimaginable consequences.
7
2
Share

What does yellow indicate on highway traffic conditions?

It indicates slow traffic. Red represents congestion, yellow indicates slow traffic, and green signifies smooth flow. When using navigation, it informs drivers about real-time traffic conditions (congested, slow-moving, or unimpeded). This feature allows for advance knowledge of road conditions ahead, helping to avoid unexpected traffic accidents causing congestion, roads under construction that cannot be passed, or local traffic restrictions. Below is relevant content introduction: 1. Car navigation system: The car navigation system has GPS global satellite positioning functionality, allowing drivers to know their exact location anytime while driving. Some car navigation systems also integrate office and entertainment features for easy driving and efficient travel. 2. The car GPS navigation system consists of two parts: one part includes the GPS receiver and display device installed in the car; the other part is the computer control center, with both parts connected via positioning satellites.
1
3
Share

What to Do When the Car Starts and Then Stalls?

Solutions for a car that starts and then stalls: Press the brake pedal firmly (avoid pumping the brakes), assess the distance of vehicles behind to determine braking intensity. If a following vehicle is too close, avoid sudden braking to prevent rear-end collisions. Although the steering wheel may feel heavy, apply sufficient force to adjust the vehicle's direction. Maintain control of the vehicle's direction, press the brake pedal, and gradually pull over to the side of the road. During this process, you may attempt a second start. Reasons why a car starts and then stalls: 1. The throttle body is dirty or there is excessive carbon buildup in the intake manifold. Use diagnostic tools to check the throttle opening and clean the throttle body or intake manifold as needed. 2. Inspect the ignition system, particularly the ignition coils, for any malfunctions. If issues are found, proceed to a repair shop immediately. 3. Insufficient fuel in the tank leading to low fuel pump pressure. 4. Clogged fuel injectors (single or multiple).
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.