Is It Necessary to Clean Carbon Deposits Inside the Engine Cylinder?

3 Answers
Emmy
07/28/25 8:34pm
Cleaning carbon deposits inside the engine cylinder is necessary. The following are the impacts caused by carbon deposits in the engine cylinder: Excessive carbon deposits lead to higher fuel consumption: If there is a significant buildup of carbon deposits in the engine over a short period, it can also result in higher fuel consumption. This situation usually occurs when substandard fuel is used. The solution is to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a substantial accumulation of carbon deposits in the engine. In such cases, it is best to leave it to a 4S shop or repair shop, where technicians can clean the carbon deposits inside the engine. Regular carbon deposit cleaning is required: Pay attention to fuel quality and clean carbon deposits regularly. Poor-quality gasoline can increase carbon deposits, and excessive deposits can roughen the intake pipe walls, affecting intake efficiency and mixture quality, leading to a sharp rise in fuel consumption. Therefore, fuel quality should not be overlooked, and cleaning carbon deposits every six months is essential.
Was this review help?
14
0
Share
DakotaAnn
08/12/25 12:16am
As an ordinary car owner with years of driving experience, my car has over 80,000 kilometers on the odometer. I used to feel that it lacked power, accelerated slowly, and frequently vibrated. Upon inspection, I found that carbon deposits in the engine cylinders were the culprit. Carbon buildup mainly results from incomplete fuel combustion and accumulates inside the cylinders, disrupting normal operation. After deciding to clean it, the effect was immediate—fuel consumption dropped by 10%, and the car ran smoother. If left untreated, carbon deposits can clog spark plugs, cause excessive emissions, and potentially damage the engine over time, leading to more expensive repairs. Cars frequently driven at low speeds in urban areas or those with frequent short trips are more prone to buildup. It's recommended to check every 50,000 kilometers and clean if necessary. Cleaning methods include chemical sprays or physical removal, and choosing a professional shop is safer.
Was this review help?
8
4
Share
Expand All
LolaRose
09/30/25 7:30am
From a car maintenance cost perspective, cleaning carbon deposits is truly worthwhile. A single cleaning session costs a few hundred yuan, but if carbon buildup becomes severe, an engine overhaul can easily run into thousands and cause significant inconvenience. Carbon deposits reduce fuel efficiency, and the long-term fuel savings can cover the cleaning costs. Based on my experience, new cars may skip this expense for the first five years, but older vehicles or high-mileage cars (e.g., over 100,000 km) should undergo regular cleaning. Additionally, excessive carbon buildup increases emissions, fails to meet environmental standards, and reduces resale value. Simple methods like using fuel additives can help prevent buildup, but professional cleaning is the ultimate solution. Remember, prevention is better than repair—addressing it early is more cost-effective.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What is the real reputation of the Envision 1.5T?

About the real reputation of the Envision 1.5T, the relevant introduction is as follows: 1. Advantages: The 1.5T Envision offers high cost performance, and its power can meet household needs. It comes with abundant configurations, including standard features such as 6 airbags, tire pressure monitoring, ESP, cruise control, hill start assist, panoramic sunroof, keyless system, multifunction steering wheel, active noise cancellation, automatic headlights, power-folding mirrors, and automatic air conditioning. 2. Disadvantages: The 2.0T model has relatively high fuel consumption, with an average real-world fuel consumption of around 12-13L. The 1.5T model has issues with its powertrain; it is paired with a dual-clutch transmission, which causes jerky gear shifts at low speeds and noise problems. Additionally, the maintenance costs are relatively high.
8
1
Share

Can Sinopec and Shell gasoline be mixed?

Gasoline can be mixed, and here are the relevant details: Gasoline can be mixed: For gasoline from different companies, the country has strictly standardized the main components of additives in gasoline. Even if mixed, it will not cause harm. In emergency situations, Sinopec and PetroChina gasoline can be mixed occasionally, but from a long-term perspective, it is not recommended to mix gasoline from different oil companies. Gasoline composition: The main components of gasoline are C5-C12 aliphatic hydrocarbons and cycloalkanes, as well as a certain amount of aromatic hydrocarbons. Gasoline has a high octane number (anti-knock combustion performance) and is classified into grades such as 89, 92, and 95 based on the octane number. Gasoline is produced by refining different gasoline components obtained from petroleum refining, such as straight-run gasoline components, catalytic cracking gasoline components, and catalytic reforming gasoline components, and then blending them with high-octane components. It is mainly used as fuel for spark-ignition internal combustion engines in automobiles.
6
4
Share

How to Choose SUV Tires?

Here are the detailed introductions and selection methods for SUV tires: 1. HT Tires: Highway Terrain tires, mainly used for urban SUV models driving on paved roads. Paved roads can be simply understood as cement and asphalt surfaces, while unpaved roads refer to gravel and mud roads. HT off-road tires are primarily designed for urban SUV models, ensuring comfort and stability for city SUVs. 2. AT Tires: AT (All-Terrain) tires, also known as all-terrain off-road tires, allow SUVs equipped with these tires to perform well on both paved and unpaved roads. AT tires have more prominent off-road capabilities compared to HP tires. AT tires feature larger tread blocks and deeper longitudinal and lateral grooves than HT tires, with relatively harder rubber in the tire body. 3. MT Tires: MT (Mud-Terrain) tires have a very distinct off-road style compared to HT and AT tires. Their tread patterns are very exaggerated, with large tread blocks and deep, wide longitudinal and lateral grooves. Mud-Terrain refers to muddy road conditions, and they can also be called mountain off-road tires.
12
5
Share

What is the oil from tire pyrolysis used for?

Tire pyrolysis oil has a high calorific value and can directly replace fuel oil for industrial or boiler heating purposes, such as in cement plants, steel mills, glass factories, etc. It can also be refined into diesel for use in diesel power plants, heavy machinery, and agricultural machinery. Here is some extended information about automotive tires: 1. Impact of tire size on vehicles: Tire size affects a car's acceleration, stability, and fuel consumption. The relationship between tire size and driving speed is complex. Small-displacement vehicles may struggle to move if fitted with oversized tires due to insufficient power, while large-displacement vehicles may have their power output limited by excessively small tires, affecting speed. Bigger and wider tires are not necessarily better. When driving on bumpy roads or over speed bumps, oversized tires can easily cause friction interference with the wheel arches. 2. Functions of tires: Tires transmit driving force, braking force, and steering force to enable vehicle operation; they support vehicle loads; and they mitigate and absorb vibrations and impacts during driving to prevent severe vibrations from damaging automotive components.
3
1
Share

What is the difference between shaft drive and chain drive?

The differences between shaft drive and chain drive are as follows: 1. Different transmission efficiency: The mechanical efficiency of shaft drive gears exceeds 99%, while that of chains is only 95%. In other words, when the same force is applied to the same bicycle, a shaft-driven bicycle can travel farther than a chain-driven one. 2. Different lifespan: The service life of shaft drive gears is several times longer than that of chain drives, with a mileage that can reach hundreds of thousands of kilometers, generally requiring no maintenance for 10 years. In contrast, chain-driven bicycles will inevitably experience chain elongation and breakage after a period of use. 3. Different lubrication environments: The gears of a shaft-driven bicycle are enclosed in a sturdy cast aluminum alloy shell, with the entire transmission system operating in a fully sealed environment where mud and sand cannot enter. It comes with oil rust and lubricating oil, and the oil will not leak out. On the other hand, the chain of a chain-driven bicycle is partially exposed during operation, making it easy for lubricants to leak out. Therefore, in most cases, chains without lubricating oil are prone to rust.
9
4
Share

Is it better to use 92 or 95 octane gasoline for the Geely Vision?

Geely Vision is equipped with a 1.5-liter naturally aspirated engine across the entire lineup, so this vehicle can use 92 octane gasoline. Gasoline with different octane ratings has different levels of octane; the higher the octane rating, the higher the octane value, and gasoline with higher octane values is more stable. Generally, 92 octane gasoline is sufficient for naturally aspirated engines in family cars. Here is some information about the Geely Vision: 1. The Geely Vision is a compact sedan under the Geely brand. Its 1.5-liter naturally aspirated engine delivers 109 horsepower and a maximum torque of 142 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The Geely Vision's engine is paired with either a 5-speed manual transmission or a CVT. The CVT is a common type of automatic transmission that is very suitable for family cars. The front suspension of the Geely Vision uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.