Is it necessary to change to snow tires for a new car?

What are the declared dimensions of the 2020 Honda Fit?

Length × Width × Height (mm) is 4096 × 1695 × 1525, a 5-door, 5-seat hatchback. Here is the relevant introduction about the 2020 Honda Fit: 1. Safety Features: The 2020 Honda Fit (FIT) has upgraded safety features, with the addition of VSA (Vehicle Stability Assist) system, tire pressure monitoring system, HSA (Hill Start Assist) system, and ESS (Emergency Stop Signal) system as standard across all trims. 2. Stylish and Safe Upgrade: The 2020 Honda Fit (FIT) has what it takes to keep the excitement going. It always prioritizes the safety and comfort of passengers, featuring standard EPS (Electric Power Steering) system, child safety door locks, and an intelligent anti-theft engine immobilizer. These technological configurations further enhance safety, maximizing the protection of passengers and safeguarding the vibrant lifestyle of young consumers. 3. Model Design: The Honda Fit (FIT) is one of the few models that can impress even the most discerning young consumers. It adopts Honda's bold and aggressive latest family-style front grille, with a wide-mouth design and wing-shaped elements that create a stylish and dynamic appearance, exuding youthful energy. The blade-style double waistline extends to the rear, combining simplicity with a well-proportioned body, showcasing a sporty and elegant silhouette. The imposing and wide rear is complemented by an integrated rear spoiler formed by stamping, giving it a determined and progressive look. The 2020 Honda Fit (FIT) offers six exterior colors: Sky Blue, Glacier Silver, Ocean Blue, Rallye Red, Taffeta White, and Blossom Orange, fully catering to consumers' personalized needs.

14

5

Share

What are the steps to replace shock absorbers?

Replacing car shock absorbers is a relatively complex process: Generally, you first loosen the nuts, remove the wheels, and then take out the shock absorbers. When reinstalling the shock absorbers, lubricating grease should be applied. After installing the shock absorbers, reattach the wheels and tighten the nuts. The detailed steps are as follows: 1. First, loosen the wheel nuts in a diagonal sequence, but do not remove them completely. 2. Use a lift to raise the car to a moderate height, just enough for convenient operation. 3. Remove all the wheel nuts in a diagonal sequence and take off the wheels. 4. Secure the shock absorber arm with a clamp jack, open the engine hood, and loosen the upper body fixing nut of the shock absorber (do not remove it completely). Then, turn the clamp jack to lift the shock absorber arm until the lower end of the shock absorber separates from the front axle fixing point. Slowly move the shock absorber away and gradually lower the shock absorber arm until the shock absorber's elasticity is fully released. Finally, completely loosen the upper body fixing nut of the shock absorber and remove it. 5. After removing the shock absorber, use a shock absorber spring tool to secure the spring to prevent it from shifting or popping out when removing the top screw. 6. Disassemble and replace any damaged parts of the shock absorber, including the rubber cover. If the shock absorber spring is not severely rusted or broken, it does not need to be replaced. When reassembling the shock absorber, apply lubricating grease to enhance wear resistance. 7. Fix the upper end of the shock absorber to the car body to ensure it does not fall. Use a clamp jack to secure the shock absorber arm and lift it to align the lower end of the shock absorber with the front axle support. Secure the lower end of the shock absorber arm to the front axle with bolts, fasten the spring strut arm nut, and then tighten the upper body fixing nut of the shock absorber. Follow the same steps to replace the remaining three shock absorbers.

13

5

Share

Where is Exeed Produced?

Exeed vehicles are produced at the Wuhu factory. Exeed is a premium sub-brand under Chery Automobile, with the TX being the first mass-produced model of the EXEED brand. Exeed embodies Chery's over 20 years of forward automotive development experience and profound technological accumulation. Below is more information about Exeed vehicles: 1. Brand Positioning: EXEED positions itself with 'Intelligent, Premium, and Dynamic' as its core brand values, prioritizing 'Intelligent' at the forefront. It fully advances Chery's 'Lion Smart Cloud' strategy, providing comprehensive next-generation intelligent mobility services for consumers in China and globally. 2. Exterior Design: The EXEED-TX breaks away from Chery's previous elongated design style, featuring a fuller overall shape that exudes the presence of an SUV. The chrome multi-bar grille paired with honeycomb air intakes gives a very bold appearance, complemented by the EXEED logo on the upper edge of the grille, showcasing a strong sense of design. 3. Intelligent Technology: The Exeed TX is also the world's first mass-produced vehicle equipped with Baidu Apollo's Xiaodu Vehicle OS. It not only supports voice recognition and smart home connectivity but also features high-end models with 'Facial Recognition and Payment' and AR real-world navigation, further enhancing the convenience of the owner's driving experience. 4. Powertrain: The Exeed TX is powered by Chery's self-developed third-generation 1.6T engine. Performance-wise, this 1.6TGDI engine delivers a peak torque of 290 Nm and a maximum power output of 145 kW, paired with a 7-speed dual-clutch transmission.

16

0

Share

How Many Years Until a Passenger Car is Scrapped?

For domestic 5-seat passenger cars and 7-seat SUVs, non-commercial small and micro vehicles have no usage lifespan limit. When the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. In addition to the above-mentioned vehicles, small and micro non-commercial passenger vehicles, large non-commercial passenger cars, and wheeled special machinery vehicles also have no usage lifespan restrictions. Commercial vehicles have scrapping time limits, as follows: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro commercial passenger vehicles have a scrapping period of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping period of 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and stamp it with the owner's seal. The registration department will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, the vehicle inspection department will determine whether they meet the scrapping standards and issue a "Vehicle Scrapping Notice" if they do. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection department for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed according to regulations. Special Notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the registration location, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. If a commercial vehicle is converted to non-commercial use, it must be scrapped according to the original commercial vehicle's scrapping time. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of a motor vehicle's registration, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation registration; (2) The owner must have owned the original vehicle for more than three years.

2

1

Share

Should the Sagitar 1.4T use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the Sagitar 1.4T should use 95 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, you can also find it marked on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade. High compression ratio engines can also be tuned to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Sagitar 1.4T occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane value, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, and in severe cases, cylinder scoring.

1

4

Share

When can a C1 license be upgraded to a B2?

It requires more than three years. Below are the conditions for upgrading from C1 to B2: Hold a small car C1 driver's license for more than 3 years, with no full-point records in the last three consecutive scoring cycles, aged between 20 and 50 years old, no record of causing a fatal traffic accident with equal or greater responsibility; no record of drunk driving; and no revocation or cancellation of the driver's license within the past ten years. C1 is a code for a type of driver's license. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), C1 refers to a license that permits driving small and micro passenger vehicles, light and micro cargo vehicles, as well as light and micro special-purpose vehicles, and also allows driving vehicles under the C2, C3, and C4 categories. A B2 license permits driving heavy and medium-duty cargo trucks or large, heavy, and medium-sized special-purpose vehicles. Heavy and medium-duty cargo trucks are mostly trucks, such as the large dump trucks commonly seen on roads, which fall under the category of heavy trucks. Large, heavy, and medium-sized special-purpose vehicles refer to vehicles equipped with specialized equipment or devices, such as water sprinklers, concrete mixers, fire trucks, etc. Article 14 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states that for first-time applicants of a motor vehicle driver's license, the permitted vehicle types include city buses, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, small automatic transmission passenger vehicles for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. For those who already hold a motor vehicle driver's license and wish to apply for additional permitted vehicle types, the additional types include large passenger vehicles, tractor trucks, city buses, medium-sized passenger vehicles, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Article 15 states that for those who already hold a motor vehicle driver's license and wish to apply for additional permitted vehicle types, there should be no record of accumulating 12 points in the current scoring cycle and the most recent scoring cycle before the application. For applications to add medium-sized passenger vehicles, tractor trucks, or large passenger vehicles, the following additional conditions must be met: For applying to add medium-sized passenger vehicles, the applicant must have held a city bus, large truck, small car, small automatic transmission car, low-speed cargo vehicle, or three-wheeled car license for more than three years, with no full-point records in the last three consecutive scoring cycles before the application. For applying to add tractor trucks, the applicant must have held a medium-sized passenger vehicle or large truck license for more than three years, or a large passenger vehicle license for more than one year, with no full-point records in the last three consecutive scoring cycles before the application. For applying to add large passenger vehicles, the applicant must have held a city bus, medium-sized passenger vehicle, or large truck license for more than five years, or a tractor truck license for more than two years, with no full-point records in the last five consecutive scoring cycles before the application. Students currently undergoing full-time driving vocational education who have obtained a small car license while in school and have no full-point records in the current and most recent scoring cycle before the application can apply to add large passenger vehicles or tractor trucks.

4

0

Share

Is it necessary to change to snow tires for a new car?

What are the declared dimensions of the 2020 Honda Fit?

What are the steps to replace shock absorbers?

Where is Exeed Produced?

How Many Years Until a Passenger Car is Scrapped?

Should the Sagitar 1.4T use 92 or 95 octane gasoline?

When can a C1 license be upgraded to a B2?

What are the reasons for ineffective braking in a hydraulic braking system?

What is the tire model specification for the Livina?

Can a Jaguar with a hood ornament pass the annual inspection?

Where is the spark plug installed?