Is it necessary to change the transmission fluid during the first maintenance?

How to Determine Engine Cylinder Scoring When Engine Oil Is Completely Leaked?

When engine oil is completely leaked, the symptoms of engine cylinder scoring mainly include the following: 1. Decreased cylinder compression pressure and reduced power; 2. Abnormal engine noise; 3. Oil entering the combustion chamber causing oil burning, with severe smoke from the exhaust pipe; 4. Engine malfunction or even stalling. Extended content: 1. Engine cylinder scoring refers to the damage to the cylinder caused by dry friction between the piston, piston rings, and cylinder liner surface due to the loss of oil lubrication, generating high temperatures that melt the metal and cause mutual pulling. 2. Prevention of cylinder scoring: (1) Maintain normal coolant temperature between 70~95 degrees Celsius to avoid engine overheating. Preheating measures should be taken before starting in winter; (2) Correctly select the clearance between the piston skirt and cylinder liner, as well as the opening and edge clearances of the piston rings; (3) Strengthen the maintenance of the air filter to prevent dust from being sucked into the cylinder; (4) Use high-quality engine oil products and ensure adequate oil levels.

4

1

Share

What Causes Body Shaking When Braking in an A6L?

With prolonged use of the vehicle, the flatness of the brake discs will decrease. Therefore, when braking, due to the uneven surface of the brake discs, you may feel shaking. Below are detailed explanations regarding this issue: 1. Brake Pedal Feels Softer: If the brake pedal feels softer when pressed or the braking distance becomes longer, it could primarily be due to excessive moisture in the brake fluid or too much air in the brake fluid reservoir. 2. Brake Pedal Sticking: If you feel that the brake pedal sticks when pressed, first check if there are any foreign objects obstructing the brake pedal under the floor mat. It could also be caused by debris between the brake disc and brake pads. 3. Steering Pulls to One Side When Braking: If the steering wheel pulls to one side or there is a noticeable tugging sensation in one direction when braking, this might be due to uneven force application by the left and right brake calipers on the brake pads. 4. Brake Noise: If there is a squeaking noise when braking, it is likely because most brake pads are designed with wear indicators. If you hear a 'squeaking' sound when lightly applying the brakes, it is the sound of the brake wear indicator, signaling that the brake pads are too thin and must be replaced immediately.

2

4

Share

What is the Difference Between Lubricating Oil and Engine Oil?

Here is a detailed introduction to the differences between lubricating oil and engine oil: 1. Engine oil, also known as engine lubricating oil, serves multiple functions such as lubrication and wear reduction, cooling and temperature reduction, sealing and leakage prevention, rust and corrosion protection, cleaning, and shock absorption. Engine oil is a type of lubricating oil, but not all lubricating oils are engine oils. Lubricating oil is a type of liquid used to reduce friction in mechanical equipment or wear pairs, such as gear oil, anti-wear hydraulic oil, and even grease. 2. Engine oil is special because the structure of a car engine is more complex, requiring higher precision in the fit between parts, and thus higher demands on the lubricating oil. It can be said that the engine is the heart of a car, and engine oil is the blood of the engine. 3. Inside the engine, there are many metal surfaces that rub against each other. These components operate at high speeds, in harsh environments, and at temperatures ranging from 400°C to 600°C. Under such extreme conditions, only specific lubricating oils can reduce wear on engine parts and extend their service life. Although engine oil is also composed of base oil and additives, the base oil is the main component of lubricating oil, determining its basic properties. However, different additives compensate for the shortcomings of the base oil and provide new properties, enabling the oil to have corresponding effects on different components.

11

1

Share

Where is the engine number located on the new Focus?

The engine number of the new Focus is located on the cylinder block, specifically on the rear sides. The engine model is marked by the manufacturer in accordance with relevant regulations or industry practices, indicating information such as the production company, specifications, performance, features, manufacturing process, intended use, and product batch of the engine. The new Focus is a compact car with body dimensions of 4647 mm in length, 1810 mm in width, and 1468 mm in height, and a wheelbase of 2705 mm. In terms of suspension, the new Focus employs a MacPherson independent front suspension and a multi-link independent rear suspension.

9

4

Share

How to Reset the Lincoln Maintenance Light?

Lincoln maintenance light reset method is: 1. Press the one-touch start button to start the vehicle engine; 2. Press the MUTE button on the right multifunction steering wheel; 3. Then press the OFF button on the left multifunction steering wheel, observe the vehicle dashboard, you can see that the oil light has been reset. Taking the Lincoln MKZ as an example, its body dimensions are 4931mm in length, 1864mm in width, and 1468mm in height, with a wheelbase of 2848mm. In terms of power, the Lincoln MKZ is equipped with three engines in total, namely a 2.0-liter naturally aspirated engine, a low-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine.

20

3

Share

How to Check the Wear Degree of Tiggo 3 Brake Pads?

There are three methods to check the thickness of Tiggo 3 brake pads: 1. When the brake pads are visibly only 1/3 remaining: When the brake pads are visibly only 1/3 of their original thickness, increase the frequency of self-inspection and prepare for replacement; 2. There are raised marks on both sides of the brake pads: When the thickness of these raised marks on both sides of the brake pads is about 2-3 millimeters, it's time to replace them; 3. When the thickness difference between the two sides of the brake pads reaches 1.5mm: For brake pads on fixed calipers, replace them when the thickness difference between the two sides reaches 1.5mm. For brake pads on floating calipers, replace them when the thickness difference reaches 3mm. Below is an introduction to brake pads: 1. Composition of brake pads: Brake pads are generally composed of a steel plate, a bonded heat insulation layer, and a friction block. The heat insulation layer is made of non-heat-conducting materials to insulate heat. The friction block consists of friction materials and adhesives, which generate friction when pressed against the brake disc or drum during braking; 2. Function of brake pads: They generate friction when pressed against the brake disc or drum during braking, thereby slowing down or stopping the vehicle.

16

5

Share

Is it necessary to change the transmission fluid during the first maintenance?

How to Determine Engine Cylinder Scoring When Engine Oil Is Completely Leaked?

What Causes Body Shaking When Braking in an A6L?

What is the Difference Between Lubricating Oil and Engine Oil?

Where is the engine number located on the new Focus?

How to Reset the Lincoln Maintenance Light?

How to Check the Wear Degree of Tiggo 3 Brake Pads?

How to Resolve 4000 RPM at 120 km/h?

What Does the Motor Vehicle Type Classification Table Include?

What brand is the car with the T logo?

What is the difference between the Dodge Demon and Hellcat?