Is it necessary to change spark plugs for BMW at 20,000 kilometers?

1 Answers
MacNatalie
07/30/25 9:02am
BMW does not require spark plug replacement at 20,000 kilometers. The replacement cycle for BMW spark plugs: Under normal maintenance conditions, replacement is recommended between 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. You can refer to the following maintenance standards for replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs between 60,000 to 80,000 kilometers. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and center electrode, it ionizes the medium between the center electrode and ground electrode to produce a spark, thereby igniting the air-fuel mixture in the cylinder.
Was this review help?
8
0
Share
More Forum Discussions

Should You Press the Clutch When Braking?

During normal driving, you do not need to press the clutch when braking. Normal conditions: If the purpose is simply to reduce speed, gently pressing the brake is sufficient without engaging the clutch. This approach not only slows the vehicle but also minimizes damage to the car body. The correct operation is to brake early, downshift to reduce speed, and utilize engine braking without pressing the clutch. Engaging and disengaging the clutch unnecessarily can cause wear to the clutch plates. Emergency situations: In an emergency requiring sudden braking, simultaneously pressing the clutch and brake is the most effective way to control the vehicle's speed, ensuring safety and protecting both the car and its occupants from harm.
15
1
Share

How many ignition coils are there?

This depends on the type of vehicle. For example, in some microcars with a 4-cylinder engine, cylinders 1 and 4 share one ignition coil, while cylinders 2 and 3 share another. A 6-cylinder engine typically has three ignition coils, and some vehicles have one ignition coil per cylinder. Below is relevant information about ignition coils: 1. Types of coils: Ignition coils are categorized into open-magnetic and closed-magnetic types based on their magnetic circuits. Traditional ignition coils use an open-magnetic design, with their iron cores made of stacked silicon steel sheets about 0.3mm thick, around which the primary and secondary coils are wound. Closed-magnetic ignition coils feature an iron core shaped like "Ⅲ" for the primary winding, with the secondary winding wrapped around it, creating a closed magnetic circuit. The advantages of closed-magnetic ignition coils include less magnetic leakage, lower energy loss, and a more compact size, making them widely used in electronic ignition systems. 2. Precautions: Improper use of ignition coils can lead to damage, so the following points should be noted to prevent overheating or moisture exposure: Do not turn on the ignition switch when the engine is not running; regularly inspect, clean, and tighten wiring connections to avoid short circuits or grounding; manage engine performance to prevent excessive voltage; avoid prolonged "spark plug arcing." Moisture on ignition coils should only be wiped off with a cloth—never use heat to dry, as this can damage the coil.
11
5
Share

How to Identify a Car Engine Model Number?

The engine number of a car is generally located near the spark plug on the left side of the engine. You can find the engine number by opening the car's hood, and it is also listed on the vehicle's registration certificate. The exact position of the engine number may vary slightly depending on the car model. Here is some information about engine numbers: Contents: The sequence and contents of the engine number may differ among manufacturers. Typically, it includes the engine model, production date, and a unique serial number assigned randomly when the engine comes off the production line. Some may also include a place of origin code. Uniqueness: The uniqueness of the engine number ensures traceability, allowing for easier tracking when issues arise with the engine or when manufacturers conduct investigations to gather feedback.
17
5
Share

What is the issue with a flickering car reversing camera?

The phenomenon of a flickering reversing camera is most likely due to poor line contact. It is necessary to promptly inspect the wiring and the connection points of the entire vehicle installation to check for any loose connections. If after checking the above two situations, the reversing camera still flickers, it should be because the reversing camera has been used for too long, resulting in poor chip photosensitivity, and there may even be a lot of snowflake-like interference. Of course, it may also be due to defects in the car's circuit design. However, situations like chip abnormalities and design defects are beyond our ability to resolve, and it is necessary to go to a repair shop for inspection, repair, or direct replacement.
6
3
Share

Is It Necessary to Add Seat Covers to a Car?

The necessity of purchasing car seat covers mainly depends on personal preferences and willingness. Seat covers can reduce wear and tear, extending the lifespan of the original seats. Some car owners also buy seat covers for aesthetic reasons, as passengers might occasionally stain or accidentally damage the seats. Most new car seats, especially those made entirely of leather, are actually very comfortable, smooth, and durable, so purchasing seat covers may not be necessary. However, if the car seats have side airbags, careful consideration is required before installing seat covers. In the cold winter, for car owners whose vehicles lack seat heating functions, the icy seats can provide an uncomfortably chilling experience every time they drive. It takes at least five minutes to warm up the seats. In the scorching, humid summer, sweating profusely, long hours of driving, and the car being exposed to the sun are unavoidable. Seats without ventilation or cooling functions can give you an extremely opposite and unpleasant experience. Hot, non-breathable seats can leave sweat stains on your clothes and pants.
17
5
Share

What is the difference between adding a motorcycle license and taking the test directly?

There is almost no difference in the procedures between taking the test directly and adding a license. Explanation of adding a license: Adding a license is to combine two driving licenses into one. However, the motorcycle license and the C1 license still require taking their respective tests separately. If you do not have a motorcycle license, you can only take the test directly; if you already have one, you can only add the license. Requirements for applying for an added license: Hold any type of motorcycle license (D, E, or F license). The applicant must not have accumulated 12 or more penalty points in the current scoring cycle and the one before applying. Additionally, the following documents are required: (1) The applicant's identity proof. (2) A medical certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. (3) The original motor vehicle driving license. (4) A completed application form.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.