Is it necessary to buy the quattro version of the Audi A4L?

2 Answers
DeJackson
07/28/25 9:07pm
Audi A4L is worth buying the quattro version. Quattro means all four wheels can receive driving force, providing relatively strong power, which is divided into part-time quattro and full-time quattro. The Audi A4L is a 4-door, 5-seat mid-size sedan under FAW-Volkswagen. Taking the Audi A4L 2020 Fashion Dynamic model as an example, its body dimensions are: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, and curb weight 1610kg. The Audi A4L 2020 Fashion Dynamic model is equipped with a 2.0L 4-cylinder turbocharged engine, with a maximum horsepower of 150ps and a maximum power of 110kw.
Was this review help?
9
3
Share
ODeclan
08/12/25 1:48am
As a car owner who has lived in northern regions for many years, I must emphasize the importance of 4WD when driving on icy and snowy roads. The quattro system in the Audi A4L shows clear advantages on slippery snow-covered surfaces, with significantly enhanced tire grip that enables smooth starts even at -20°C. While 2WD is sufficient for daily urban commuting, when encountering complex road conditions like heavy rain floods or steep mountain slopes, quattro's active torque distribution mechanism can effectively reduce loss-of-control risks. However, this system adds 10,000-20,000 RMB to the budget and increases fuel consumption by about 10%. For primarily flat urban use, the luxury trim with 2WD is completely adequate. During my recent ski trip to Changbai Mountain, the 4WD A4L in our convoy handled icy slopes noticeably more effortlessly than front-wheel-drive vehicles.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What is the ground clearance of the Sagitar?

Volkswagen Sagitar has a minimum ground clearance of 113mm. The following are the possible consequences of too low ground clearance: 1. Exhaust pipe rupture: The exhaust pipe is very fragile and located at the bottom of the vehicle. If it hits hard objects like stones or sharp edges, it can even be cut. Speed bumps are common and vary in height and shape. Some are higher or wider, and if the driver does not slow down when passing over them, it can easily lead to exhaust pipe rupture. 2. Trailing arm deformation: The car tire has five angle restrictions in space, which affect the steering control and torque transmission of the vehicle. When the car bottoms out, the trailing arm is highly likely to deform, greatly affecting the precise tire alignment parameters. This has a very negative impact on the handling safety during high-speed turns. Therefore, if the car bottoms out, it is best to go to a professional institution for four-wheel alignment parameter repairs.
6
3
Share

Where are Continental tires produced?

Continental tires are produced in Hefei, Anhui. Here are specific methods for tire maintenance: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should not be too high or too low; inflate according to the vehicle's indicated tire pressure. In summer, try to keep the tire pressure slightly lower. In winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. 2. Inspect wear conditions: Some vehicles may experience uneven tire wear. Frequently check the inner side of the tires for abnormal wear, focusing on whether the tread depth is consistent on both sides. 3. Remove foreign objects promptly: Foreign objects in the tire treads pose potential hazards and can be ejected while driving. Keep the tires as clean as possible. 4. Perform wheel alignment regularly: If the vehicle pulls to one side or exhibits other abnormal steering behaviors, perform wheel alignment promptly to prevent further tire issues. Wheel alignment ensures even force distribution across all four tires, avoiding excessive wear.
15
0
Share

Does a damaged car valve require a major overhaul?

The damaged car valve does not require a major overhaul. The function of the throttle valve is: to control the air entering the engine. After the gas enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to perform work. The effects of a clogged throttle valve include: 1. The vehicle idles roughly, and it is difficult to start when cold; 2. The engine is prone to stalling after rapid acceleration and releasing the throttle; 3. Increased fuel consumption and engine shaking. Precautions for using the throttle valve: 1. Clean the throttle valve frequently; excessive sludge on the throttle valve can cause insufficient engine power and increased fuel consumption; 2. Apply oil to the fixed metal retaining ring before disassembly to prevent thread stripping; 3. If the throttle valve opening remains the same as before cleaning after cleaning, it can cause excessive air intake, leading to engine shaking during startup and weak acceleration.
10
5
Share

What Causes the "Clunk" Sound When Braking in BMW 3 Series?

BMW 3 Series brake noise is caused by excessive wear of the brake discs or uneven wear due to the driving habits of the owner. Below are the specific explanations for BMW: 1. Background: BMW cars refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW), with main series models including 1, 2, 3, 4, 5, 6, 7, and 8. BMW is renowned worldwide for producing luxury cars, motorcycles, and high-performance engines. 2. Logo Meaning: The BMW logo features a double-circle design with the word "BMW" inscribed above the double circles. The entire emblem resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing BMW's long-standing history and its consistent mission and goals. It reflects the company's commitment to meeting customers' greatest desires with the latest technology and advanced concepts, showcasing its dynamic spirit and ever-evolving new image, while indicating the superior quality, technological leadership, and global presence of BMW cars.
6
0
Share

Is the Lynk & Co a Three-Cylinder Engine?

Lynk & Co's 1.5-liter and 2.0-liter turbocharged engines are three-cylinder engines. Introduction to the 1.5T Turbocharged Engine: The engine displacement is 1.5 liters; the engine intake method is turbocharged; the 'T' in 1.5T stands for Turbo, indicating turbocharging. Differences Between Three-Cylinder and Four-Cylinder Engines: A three-cylinder engine has three cylinders; a four-cylinder engine has four cylinders. Three-cylinder engines have a simpler structure, smaller size, lighter weight, and easier layout; four-cylinder engines have a relatively more complex structure. In a three-cylinder engine, the three pistons cannot move up and down simultaneously, making it difficult to suppress vibration; in a four-cylinder engine, cylinders 1 and 4, and cylinders 2 and 3 move up and down together, which helps suppress vibration. Due to their inherent structural advantages, three-cylinder cars perform better in fuel consumption control; four-cylinder cars have a more complex structure and higher fuel consumption.
3
2
Share

Can Driving Schools Provide Practice Driving?

Nationwide driving tests have resumed. In regions where exams have restarted, students can proceed with normal learning and practice driving. When going for driving lessons now, it is essential to take personal protective measures: avoid crowded areas, wear masks, and wash hands promptly for disinfection. Confirm in advance with the driving school whether the practice environment is regularly disinfected and the number of students practicing in the same vehicle during the same time slot. Adhere to the requirements of the driving school and test centers. Precautions for novice drivers: 1. Do not forget to engage the handbrake when parking: A slight oversight can lead to the danger of the vehicle rolling, which not only may damage your car but also could harm others' property or even lives. Though the mistake is small, the consequences can be severe. 2. Do not forget to release the handbrake when starting: When first learning to drive, always follow the correct sequence when starting the car. Regardless of whether the handbrake was engaged when parking, always check to release it when starting. 3. Do not forget to shift to neutral when exiting the vehicle: Forgetting to shift back to neutral or Park after parking can, at best, stall the engine. If combined with forgetting to engage the handbrake, it may cause the car to lurch forward from its parked position.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.