Is it necessary to buy a car cover?

Are Goodluck Tires and Chaoyang Tires Produced in the Same Factory?

Although Chaoyang Tires and Goodluck Tires are manufactured by different producers, they both belong to the Zhongce Rubber Group. Tire Shelf Life: The main component of tires is rubber, which has a shelf life, so tires also have a shelf life. Fresh rubber has the best performance in all aspects, hence newly produced tires perform the best. According to an ADAC survey on unused tires produced in different years, the longer a tire is stored, the worse its performance becomes. Tire Replacement Cycle: Tires are rubber products and will age even if not used. It is recommended to replace tires every four years, even if the mileage driven within the year is minimal.

15

0

Share

Will Delaying Maintenance by One Month Void the Warranty?

Delaying maintenance by one month will not void the warranty. Below is relevant information: Automobile Maintenance: Automobile maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a vehicle, also known as vehicle upkeep. Modern automobile maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas. Notes on Automobile Maintenance Timing: After the vehicle's regular maintenance is completed, urge the maintenance technician to address any other faults identified beforehand. Prepare the user manual (must bring) for maintenance. Also, organize items in the car and avoid leaving valuables inside to prevent loss.

4

2

Share

How Often Should Brake Fluid and Transmission Fluid Be Replaced?

Brake fluid and transmission fluid should be replaced every two years. Below are the relevant introductions: The function of automotive brake fluid: Brake fluid, also known as hydraulic brake fluid, is a functional liquid in a vehicle's braking system that transmits pressure to enable the braking action on the wheels. Its main roles include energy transmission, heat dissipation, anti-corrosion and anti-rust, as well as lubrication. The function of automotive transmission fluid: Automotive transmission fluid is an oil product that keeps the gear system clean and plays a role in lubrication to extend the lifespan of the transmission device. It provides effective lubrication even at low temperatures and reduces fluid loss under harsh operating conditions. Depending on the structure of the transmission, transmission fluid is further categorized into automatic transmission fluid and manual transmission fluid.

19

1

Share

Does the P0017 trouble code indicate a skipped tooth?

Fault code P0017 refers to an unreasonable correlation between the crankshaft position and the exhaust camshaft position. There are multiple causes for the P0017 trouble code, with a skipped tooth being just one of them. Not every occurrence of the P0017 fault code is caused by a skipped tooth. The main causes of the P0017 fault code can be categorized into the following six types. 1. Oil pressure and oil quality: A malfunctioning or clogged oil pump, or blocked oil passages, can lead to abnormal oil pressure, preventing the VVT actuator from establishing the ideal oil pressure, thereby causing the P0017 fault. In such cases, an oil pressure gauge should be used to measure the oil pressure, or the oil pan should be removed to check if the filter screen is clogged. If these components are functioning normally, the focus should shift to inspecting whether the engine oil passages are blocked, followed by repairs based on the specific fault condition. Oil quality issues mainly arise when substandard lubricants are used, such as replacing the engine's required low-viscosity oil with a high-viscosity oil, which can also trigger the P0017 fault. The solution is to replace the oil with one suitable for the engine. 2. VVT solenoid valve sticking: VVT stands for variable valve timing technology, which adjusts the overlap time and timing of the engine's intake and exhaust systems to enhance power and fuel economy. The VVT solenoid valve, as a critical component of this system, works directly with the VVT actuator. If the oil is dirty and clogs the VVT filter screen, or if the solenoid valve itself is damaged or stuck, it can cause misalignment in the timing system. The remedy involves removing the VVT solenoid valve for cleaning or replacing it with a new one. 3. VVT actuator failure: The VVT actuator, also known as the variable timing wheel, alters the camshaft's angle through oil pressure. If the VVT actuator is internally fractured or the oil chamber loses pressure, it will either stop working or function abnormally. Since the actuator is irreparable, it must be replaced with a new one. 4. Chain skipped tooth or tensioner pressure loss: Due to the material used in timing chains, they can experience metal fatigue after a certain period or mileage, leading to elongation and incorrect ignition timing. The solution is to replace the timing chain. The tensioner, which controls the chain's tightness, is driven by oil pressure. If the tensioner loses pressure, the chain will loosen, resulting in the P0017 fault. Replacing the tensioner resolves this issue. 5. Camshaft and crankshaft position sensor and signal disc failure: The angles of the crankshaft and camshaft are typically detected by the crankshaft position sensor and camshaft position sensor. A malfunction in either sensor can cause the P0017 fault code. The solution involves checking whether the sensors or signal discs are dirty, inspecting the wiring for faults, and performing repairs based on the findings. 6. ECU damage: The ECU, or engine control unit, processes signals from sensors and sends commands to control the actuators. If the ECU malfunctions, it may issue incorrect commands, leading to the P0017 fault. The solution is to repair or replace the engine control unit.

3

2

Share

Is it acceptable for a car's front wheels to be one size larger than the rear wheels?

It is not acceptable for a car's front wheels to be one size larger than the rear wheels. Here are the relevant explanations: Reasons why front wheels cannot be one size larger than rear wheels: Uneven friction distribution between front and rear wheels will lead to increased fuel consumption. The vehicle will fail relevant annual inspections. Automotive wheel regulations: The total lateral runout and radial runout of wheel assemblies should not exceed 5mm for vehicles with total mass ≤3500kg. The length of tread wear or sidewall damage must not exceed 25mm in length or depth, as this may cause abnormal wear and deformation. Special school buses must use tubeless radial tires; highway coaches, tour buses and school buses must use retreaded tires for all wheels and undergo regular inspections.

17

3

Share

What kind of engine oil should be used for Mercedes-Benz A200L?

Mercedes-Benz A200L uses 5w40 (5L) fully synthetic engine oil, with a replacement cycle of 10,000 kilometers. Car fuel consumption: Generally, the car's onboard computer will provide an average fuel consumption value, which is displayed on the dashboard, but it usually differs from the actual fuel consumption. Specific car fuel consumption can be calculated using a formula. Car fuel consumption considerations: Plan your route before driving, check traffic conditions, and try to avoid roads prone to traffic jams. Maintain a steady speed while driving, as unstable driving speeds can increase fuel consumption by about 6% in suburban areas and 2% in urban areas. Avoid carrying unnecessary items in the car to reduce weight.

12

2

Share

Is it necessary to buy a car cover?

Are Goodluck Tires and Chaoyang Tires Produced in the Same Factory?

Will Delaying Maintenance by One Month Void the Warranty?

How Often Should Brake Fluid and Transmission Fluid Be Replaced?

Does the P0017 trouble code indicate a skipped tooth?

Is it acceptable for a car's front wheels to be one size larger than the rear wheels?

What kind of engine oil should be used for Mercedes-Benz A200L?

What Causes Engine Knock and Misfire in BMW?

What are the five forms of gear failure?

When should the first maintenance for a new car be done?

What engine does the Dodge Ram use?