Is it necessary to arrive 30 minutes early for Subject 1 test?

1 Answers
StGemma
07/30/25 2:46am
It is recommended to arrive at least half an hour early before taking the Subject 1 test. Here are the relevant details: Test content: Includes the most basic knowledge such as driving theory foundation, road safety laws and regulations, traffic signals, traffic rules, plus local regulations. The scheduling of driver's theory test is arranged by local vehicle management offices. Subject 1: Part of the teaching and examination outline for motor vehicle driver training. This outline divides the examination into three subjects, organized by the traffic management department of public security authorities. The examination sequence proceeds as Subject 1, Subject 2, and Subject 3. After passing the previous subject, candidates can proceed to the next subject; if failed, they must retake the current subject.
Was this review help?
12
1
Share
More Forum Discussions

How Often Should Volvo Brake Fluid Be Replaced?

Volvo recommends inspecting the brake fluid approximately every 4 years or replacing it every 60,000 kilometers. However, this is only a general guideline and should be adjusted based on the vehicle's usage. Brake fluid is somewhat corrosive and highly hygroscopic. A dedicated brake fluid tester can be used to check the moisture content in the brake fluid to determine if replacement is necessary. Additionally, the color of the brake fluid can be observed—if it appears black, it should be replaced. Extended Information: 1. Criteria for Brake Fluid Replacement: The sole criterion for determining whether brake fluid needs replacement is its moisture content. It is generally advised to visit a professional repair shop where a brake fluid moisture tester can accurately measure the moisture level. If the moisture content exceeds 5%, the brake fluid is deemed unfit for use and must be replaced immediately. If the moisture content is found to be above 3%, it indicates that the brake fluid has begun to deteriorate significantly. Although it hasn't reached the 5% threshold, the owner should be prepared to replace it as soon as possible. 2. Hazards of Not Replacing Brake Fluid Promptly: Prolonged failure to replace brake fluid can reduce braking force, leading to air resistance in the brake lines, which affects braking performance. Additionally, it may corrode the brake lines, damaging the internal valves of the anti-lock braking hydraulic assembly and severely impairing the responsiveness of the braking system. Furthermore, prolonged use of old brake fluid can cause wear to the pistons in the brake pump, resulting in contaminated brake fluid.
13
0
Share

How to Replace the Octavia Wiper Blades?

Octavia wiper blade replacement steps are as follows: 1. First, use a suitable screwdriver to open the plastic cover at the connection between the wiper arm and the wiper blade, then hold the wiper blade with your hand. 2. Pull firmly along the direction of the wiper arm (the part where the base of the arm connects to the wiper pivot), and the wiper blade can be removed. 3. For installation, follow the reverse steps of removal. Fit the new wiper blade into the groove of the wiper arm, cover it with the plastic cap, and the replacement is complete. Relevant information about wiper blades is as follows: 1. Wiper blades generally come in three types: vacuum wipers, electric wipers, and wipers with electronic control units. 2. The disadvantage of vacuum wipers is the unstable speed of the wiper blade. When the engine's vacuum decreases (for example, when the car is climbing a slope), the wiper blade may stop, obscuring the driver's vision. 3. In electric wipers, the motor drives the output shaft via a worm gear on the armature shaft and then drives the output gear through an idler gear and idler shaft. The output shaft then operates the output arm connected to the wiper linkage. When the motor rotates, the output arm and linkage are driven to move back and forth.
4
3
Share

What is the age limit for a large vehicle driver's license?

The minimum age requirement for a large bus or tractor driver's license is 22 years old; for urban buses, medium-sized buses, and large trucks, the minimum age is 20 years old. The maximum age limit for all these licenses is 60 years old. Relaxing the age limit and shortening the time required for license upgrades are part of the 12 measures in the public security traffic management's 'streamlining administration, delegating powers, improving regulation, and upgrading services' reform to optimize the business environment. The details of shortening the upgrade time are as follows: For applying to upgrade to a large bus driving permit, the requirement of having held an urban bus or medium-sized bus driving permit for more than five years has been adjusted to more than two years. The requirement of having held a large truck driving permit for more than five years has been adjusted to more than three years, or having held a tractor driving permit for more than two years has been adjusted to more than one year. Additionally, there must be no record of accumulating 12 penalty points in the last three consecutive scoring cycles before the application. For applying to upgrade to a tractor driving permit, the requirement of having held a medium-sized bus or large truck driving permit for more than three years has been adjusted to more than two years, or having held a large bus driving permit for more than one year. There must also be no record of accumulating 12 penalty points in the last two consecutive scoring cycles before the application. For applying to upgrade to a medium-sized bus driving permit, the requirement of having held an urban bus, large truck, small car, or small automatic transmission car driving permit for more than three years has been adjusted to more than two years. There must also be no record of accumulating 12 penalty points in the last two consecutive scoring cycles before the application.
13
4
Share

Can a Civic's 16-inch wheels be legally registered after upgrading to 17-inch wheels?

Upgrading a Civic's 16-inch wheels to 17-inch wheels is considered illegal modification and cannot be registered. While it is technically possible to replace 16-inch wheels with 17-inch ones, it is not permitted by law. According to relevant regulations, all parameters of the new wheels must match the original ones, with only stylistic modifications allowed. Legal car modifications include the following: 1. Replacing wheels of the same size: You can change the wheels without altering the vehicle's length, width, or main structure, but the wheel size must match the original factory specifications and must not extend beyond the fenders. 2. Changing the vehicle's color: National laws allow individuals to change the vehicle's color. However, if the color change covers more than 30% of the body, you must visit the vehicle management office within 10 days to take new photos and apply for the change. You cannot use colors reserved for official vehicles (e.g., police cars, fire trucks, ambulances) or reflective or 'chameleon' colors. 3. Installing a roof rack: The installed rack must not alter the vehicle's length, width, or main structure, and its height must not exceed 30 cm. It must also be securely attached. 4. Adding running boards: Running boards can be installed, but they must not change the vehicle's length, width, or main structure. 5. Replacing the grille or bumper: You can replace the grille or bumper as long as the vehicle's length and width remain unchanged. 6. Modifying the interior: Interior modifications are more lenient compared to exterior changes. Examples include installing carbon fiber panels, an Alcantara steering wheel, upgrading the audio system, or adding leather seats. 7. Modifying headlights: As long as the color is not changed, the color temperature is below 6000K, and the dual-lens setup does not cause glare that could affect other drivers, the modification is legal and will pass annual inspections. 8. Upgrading the braking system: This includes replacing performance brake pads, discs, or even calipers. Reasonable upgrades to the braking system not only enhance appearance but also significantly reduce braking distance and improve pedal feel.
10
2
Share

What to Do When Four Warning Lights Illuminate in the Sagitar?

Generally, when warning lights illuminate in the Sagitar, it is often due to a fuel emission system malfunction. The following steps can be taken: When the warning light is on, start and turn off the vehicle three times, then observe whether the warning light remains illuminated. If it stays on, it is necessary to promptly visit a service center to check the fault codes, as this typically indicates an engine or sensor issue. If the light does not stay on, it may be an intermittent fault that does not require immediate inspection. Below is a detailed introduction to various vehicle indicator lights: 1. Seat Belt Indicator: This light indicates whether the seat belt is locked. When illuminated, it means the seat belt has not been properly fastened. Some models may also emit a warning sound. The light will turn off automatically once the seat belt is fastened. 2. Door Indicator: This light shows the status of all vehicle doors. If any door is not closed or not properly closed, the corresponding door indicator will light up, alerting the driver. The light will turn off once the door is properly closed. 3. Oil Pressure Indicator: This light displays the oil pressure status in the engine. It illuminates when the ignition is turned on and the vehicle performs a self-check, then turns off after the engine starts. If the light remains on, it indicates that the engine oil pressure is below the required standard and requires servicing. 4. Fuel Level Indicator: This light shows the amount of fuel in the vehicle. During the self-check when the ignition is turned on, the fuel level indicator will briefly illuminate and then turn off. If it stays on after starting the engine, it means the fuel level is low. 5. ABS Indicator: This light indicates the status of the ABS system. During the self-check when the ignition is turned on, the ABS light will illuminate for a few seconds and then turn off. If it does not light up or remains on after starting, it indicates an ABS malfunction. 6. Handbrake Indicator: This light shows the status of the handbrake. Normally, it is off. When the handbrake is engaged, the light turns on automatically and turns off when the handbrake is released. Some models may emit a warning sound if the handbrake is not released while driving. 7. Coolant Temperature Indicator: This light displays the temperature of the engine coolant. During the self-check when the ignition is turned on, it will illuminate briefly and then turn off. If it stays on, it means the coolant temperature exceeds the specified limit, and the vehicle should be stopped immediately. The light will turn off once the temperature normalizes. 8. Brake Pad Indicator: This light shows the wear status of the brake pads. Normally, it is off. If the brake pads are faulty or excessively worn, the light will illuminate and turn off after repairs. 9. Airbag Indicator: This light indicates the status of the airbag system. During the self-check when the ignition is turned on, it will illuminate briefly and then turn off. If it stays on, it indicates an airbag malfunction. 10. Battery Indicator: This light shows the status of the battery. It illuminates during the self-check when the ignition is turned on and turns off after the engine starts. If it stays on after starting, it indicates a battery issue that requires replacement.
17
4
Share

Which intersections have red light cameras?

If there are cameras, they will capture violations. Whether a motor vehicle runs a red light while turning left or going straight, it constitutes illegal behavior. According to the relevant provisions of the "Road Traffic Safety Law," Article 44 states that motor vehicles passing through intersections must follow traffic signals, traffic signs, road markings, or the instructions of traffic police. When passing through intersections without traffic signals, signs, markings, or police direction, vehicles must slow down and yield to pedestrians and vehicles with the right of way. Here are some tips to avoid running red lights: First look at arrow signals, then circular signals: Currently, there are two types of traffic lights: arrow signals and circular signals. When arrow signals are present, drivers should first observe the arrow signals and then the circular signals to avoid running red lights. Note: When encountering a circular red light, right turns are allowed; when encountering an arrow signal where the right-turn arrow is red, right turns are prohibited, and violations will be penalized as running a red light. Brake in time: When a red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, electronic cameras will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must wait for the next green light before proceeding. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, drivers can judge accordingly. If there is no countdown, and the vehicle is close to the intersection with high speed, it may proceed to avoid running a red light due to delayed braking. If the speed is low and the vehicle is far from the intersection, it should brake immediately to avoid running the red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the violation. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, and even electronic police cannot clearly see the traffic lights. Blurred evidence photos may result in no penalty for mistakenly running a red light. Emergency situations: Transporting critically ill patients to the hospital may involve running multiple red lights. After delivery, drivers can provide hospital or patient proof to the traffic police for verification. If confirmed, the violations will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the gestures of the traffic police. The traffic police department states that according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," vehicles that have crossed the stop line when the yellow light flashes may continue. If drivers rush through after the yellow light turns on, it will still be considered running a red light.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.