Is It Necessary to Apply Tire Wax?

How to fold and flatten the rear seats of the Tiguan L?

The method to fold and flatten the rear seats of the Tiguan L is: Pull the buckle handle at the headrest position of the rear seat upwards. To restore, simply push the rear seat forward until you hear a click, indicating the seat is locked. Car seats come with features such as automatic adjustment, seat memory, seat ventilation, and heating. Some seats also allow adjustment of the headrest, lumbar support, and leg rest for enhanced comfort. The Tiguan L is produced by SAIC Volkswagen, with the new model offering a total of 7 variants powered by 1.8T and 2.0T engines. The exterior design is clean and simple, featuring additional chrome accents compared to the standard wheelbase model, along with some changes to the C-pillar design. The vehicle dimensions are 4712mm in length, 1839mm in width, 1673mm in height, with a wheelbase of 2791mm.

4

5

Share

Where is the oxygen sensor located on the old Jetta?

The old Jetta has one oxygen sensor at the position where the exhaust pipe exits the engine and another behind the three-way catalytic converter, which are referred to as the front and rear oxygen sensors. The oxygen sensor primarily detects the oxygen content in the exhaust, and the ECU adjusts the fuel injection based on the data it transmits. There is no difference in structure or working principle between the front and rear oxygen sensors. The Jetta is a joint venture of the German Volkswagen Group in China and is a car brand under FAW-Volkswagen Automotive Co., Ltd. Its first product, the Jetta, was launched in Europe in 1979. Structurally, the Jetta is essentially a Golf with a trunk added to the rear, making it a derivative model of the Golf.

2

1

Share

Where is the trunk switch on the old Jetta?

The trunk switch on the old Jetta model is a contact point. There is a pressable area on the left side of the door lock position where the lid lifts up, which serves as the trunk switch. For the new Jetta models, the trunk is generally opened with the key, and some have a trunk release switch on the center console. Jetta is an automobile brand of Volkswagen AG in Germany, and it was launched in Europe in 1979. Structurally speaking, the Jetta, including the later Vento and Bora models, are essentially Golfs with an added trunk at the rear. The Jetta can be considered a derivative of the Golf. In China, the Jetta was the first to adopt the world's advanced 5-valve multi-point electronic fuel injection engine, and with its unique product design performance and comprehensive safety technology equipment, it formed a distinctive product personality for the Jetta series of sedans.

4

5

Share

Does the Lavida have a wagon version?

The Lavida does have a wagon version, which is referred to as the hatchback model. The Lavida wagon is equipped with two types of engines: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. The 1.2-liter turbocharged engine delivers a maximum power of 85 kW and a peak torque of 200 Nm, with the maximum power achieved at 5,000 rpm and the peak torque available between 2,000 to 3,500 rpm. The 1.4-liter turbocharged engine produces a maximum power of 110 kW and a peak torque of 250 Nm, with the maximum power achieved at 5,000 rpm and the peak torque available between 1,750 to 3,000 rpm. The Lavida is a sedan produced by Shanghai Volkswagen and was launched in June 2008. While retaining the design language of the A-segment car market, the Lavida embodies a completely new design concept.

3

Share

How Often Should Tire Rotation Be Performed?

Tire rotation does not have a fixed interval, but for safety reasons, it is recommended to perform it every 20,000 kilometers. Below are the requirements for tire rotation: 1. For unidirectional tread tires, avoid X-pattern cross rotation and instead use the H-pattern rotation method. 2. During rotation, new tires should be placed on the drive wheels. If the tread depth is less than 1.6mm, replace the tires and perform a wheel alignment instead of rotating to extend their lifespan. 3. The tires being rotated must be of the same size, specification, and tread pattern. Below are the precautions after tire rotation: 1. Rotated tires must undergo dynamic balancing before installation. Dynamic balancing eliminates tire bounce, which is crucial at high speeds; otherwise, it may lead to abnormal wear, shaking, or instability. 2. After rotation, it is advisable to perform a wheel alignment to adjust the toe-in and camber angles of the front and rear wheels.

17

4

Share

How to deal with the EPC light on in the Tiguan?

The method to deal with the EPC light on in the Tiguan is: first turn off the vehicle, then restart it. If the EPC light goes off, it is a system false alarm and you can use the car normally. If the EPC light remains on, you need to go to a repair shop or a 4S store for professional inspection and repair to prevent safety hazards. The reasons for the EPC light being on include: 1. The car's intake system is blocked or leaking; 2. Severe carbon buildup in the throttle; 3. The fuel quality added is too poor. The Tiguan is a compact SUV under SAIC Volkswagen, with body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, and a wheelbase of 2684mm.

19

4

Share

Is It Necessary to Apply Tire Wax?

How to fold and flatten the rear seats of the Tiguan L?

Where is the oxygen sensor located on the old Jetta?

Where is the trunk switch on the old Jetta?

Does the Lavida have a wagon version?

How Often Should Tire Rotation Be Performed?

How to deal with the EPC light on in the Tiguan?

Does the Tiguan L belong to SAIC Volkswagen or FAW-Volkswagen?

How to Start and Park the xrv?

What kind of engine oil does the Lavida need?

What are the steps to turn on the heating in an older Passat model?