Is It Necessary to Apply the Brakes in School Zones?

1 Answers
JessicaMarie
07/29/25 4:37pm
Approximately 30 meters before entering a school zone, lightly apply the brakes to reduce speed below 30 km/h, observe the surroundings to ensure safety, and then proceed slowly. Key considerations when driving through school zones: Always slow down promptly, pay attention to the conditions on both sides of the road or the surroundings, and yield to students crossing the street. Especially during school hours or after dismissal, be prepared to stop for students and children crossing the road. When students are crossing, come to a complete stop and let them pass; avoid honking or driving alongside them. Heed warning signs. Most school zones are marked with warning signs indicating the presence of a school ahead. Upon seeing these signs, drivers must reduce speed and increase vigilance. In emergencies, avoid making left or right turns. If an emergency arises while driving, remember that the first response should be to brake, especially when approaching intersections—do not turn left or right. Check blind spots carefully. When driving near schools, be extra cautious when changing lanes or making turns. Students on bicycles may not ride slowly, and their small size makes them harder to spot. Therefore, when turning, not only should you check the mirrors and use turn signals, but also turn your head to check blind spots and ensure there are no obstacles before proceeding. Always be alert to the possibility of children darting out unexpectedly. Follow road deceleration instructions. When passing near schools or crosswalks, drivers must check for students waiting to cross the street and ensure it is safe before proceeding. Upon seeing speed bumps near school entrances, slow down to avoid driving too fast, which could lead to collisions with students playing nearby. Parking is prohibited at school entrances. Parking spaces near schools are often limited, and illegal parking for pickups and drop-offs is common, posing safety risks to children.
Was this review help?
16
5
Share
More Forum Discussions

How Many Liters of Oil Does a Cadillac Need?

Cadillac generally requires 5 liters of oil. Below are detailed instructions for oil changes: 1. When changing the oil, the oil filter must also be replaced. The new oil filter initially contains no oil; after starting the vehicle, oil will flow into the filter. Waiting 3 minutes after turning off the engine allows the oil to settle into the oil pan, ensuring a more accurate oil level reading. Never check the oil level on a slope, as the vehicle's tilt causes the oil in the pan to tilt as well, leading to an inaccurate measurement. The oil dipstick must be held perpendicular to the ground for the most precise reading. 2. Overfilling oil can interfere with the crankshaft's normal operation and increase fuel consumption. Specifically, when the crankshaft journal moves to the bottom dead center, it may come into contact with the excess oil, creating resistance that disrupts normal operation, which is not permissible. 3. Insufficient oil is also problematic, as it fails to provide adequate lubrication for the engine's moving parts, accelerating wear and potentially causing engine damage. Therefore, it is crucial to maintain the oil level within the specified range.
8
1
Share

How often should the spark plugs be replaced in a Sagitar 1.6?

The replacement interval for spark plugs in a Sagitar 1.6 primarily depends on the mileage. It is recommended to replace the spark plugs once every 40,000 to 60,000 kilometers. Spark plugs are a crucial component of the gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber and generate a spark by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. Steps for replacing spark plugs: Open the hood, lift the plastic engine cover, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover.
12
1
Share

What Causes High Idle Speed During Cold Starts in Winter?

Cold start idle speed suddenly increasing is a normal phenomenon, designed to help the engine quickly reach its optimal operating temperature. Below are the reasons for the sudden rise in idle speed during cold starts:1. During cold conditions, the coordination between various engine components is not at its best. The optimal operating temperature for engines after prolonged use is between 80-110 degrees Celsius. Therefore, during the design and manufacturing of the engine, each component is optimized to achieve the best coordination at this temperature. Increasing the idle speed helps the engine reach its working temperature faster.2. In cold conditions, the intake air temperature is low, leading to poor fuel atomization. Some fuel sprayed from the injectors does not atomize properly and instead adheres to the intake manifold, which can lead to carbon buildup. This also makes it difficult to control the concentration of the air-fuel mixture entering the engine. To address this issue, the best solution is to quickly raise the engine coolant temperature, hence increasing the idle speed during cold starts is the most effective method.3. This phenomenon varies depending on the climate and temperature. For example, in northern regions or extremely cold environments, the increase in idle speed after starting the car is more significant and lasts longer. Conversely, in higher ambient temperatures, the fluctuation in idle speed after engine startup is minimal or even unnoticeable.
5
2
Share

Can the BMW S1000RR be registered for license plates?

The maximum displacement allowed for road-legal motorcycles in China is 150CC. Officially imported large-displacement motorcycles can be registered for license plates as long as they have 3C certification and customs tax payment certificates, allowing them to be registered at the vehicle management office. The BMW S1000RR can be registered and driven on the road. Chassis Upgrades: The M1000RR has undergone some modifications to its chassis. These include an adjustment of the front rake angle to 23.6 degrees and a trail of 3.9 inches (compared to the S1000RR (HP4)'s 23.1 degrees and 3.7 inches). The total wheelbase has also increased from 56.7 inches to 57.4 inches, primarily due to a longer rear swingarm. Electronic Control Systems: The M1000RR offers four riding modes, including Rain, Road, Dynamic, and Race, as well as three freely configurable RacePro modes. Under various riding modes, the throttle response, ABS, traction control, engine braking level, and wheelie control system will respond differently.
17
0
Share

Can I Learn to Drive an Automatic Transmission Car?

You can learn to drive an automatic transmission car by applying for a C2 driver's license. Here is the relevant information: Both C1 and C2 driver's licenses allow you to drive small or mini passenger cars, light or mini cargo vehicles, light, mini, or micro special operation vehicles, and small passenger cars with fewer than 9 seats. The difference is that a C1 license permits driving all the above vehicle types, while a C2 license only allows driving automatic transmission vehicles. 1. The steps for starting an automatic transmission car are: 1. Fasten your seatbelt; 2. Start the engine; 3. Press the brake and shift to D gear; 4. Release the handbrake; 5. Turn on the left turn signal; 6. Release the brake, press the accelerator, and straighten the turn signal to complete the start. 2. The gears of an automatic transmission include: 1. P (Park) for parking and starting; 2. R (Reverse) for backing up; 3. N (Neutral) for neutral; 4. D (Drive) for driving forward; 5. L (Low) for low speed; 6. S (Sport) for sport mode; 7. OD (Overdrive) for overdrive.
16
0
Share

How to Turn Off the Auto Start-Stop in the Verano?

The methods to turn off the auto start-stop in the Verano: 1. The Verano has a dedicated switch button for the auto start-stop function. Press it once to turn off, and press again to turn on. The specific location of the button is next to the gear lever, where there are four small buttons. One of them has a letter A with OFF underneath. This button controls the auto start-stop switch. 2. The auto start-stop in the Verano is turned on by default. When the indicator light is off, it means the function is on. Press the button once, and the indicator light will turn on, indicating the function is off. 3. Turn on the front window defogger. In this case, the auto start-stop will be turned off. After turning it off, the auto start-stop will be back on once the engine is restarted. 4. During actual operation, the auto start-stop in the Verano will not be triggered if you press the brake pedal very lightly—just enough to barely stop the car. The auto start-stop only engages when you press the brake pedal firmly and come to a complete stop.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.