Is it necessary to apply film on the front windshield of a car?

1 Answers
SilasFitz
07/29/25 11:26am
Applying film to the front windshield of a car is beneficial. It effectively blocks ultraviolet rays from outside, preventing the interior from becoming too hot during summer, which could otherwise affect the driver's comfort. Additionally, the film reduces the glare from oncoming headlights during nighttime driving, enhancing safety. Here are some additional details: 1. When applying film, choose a slightly lighter tint or a clear film for the front windshield to ensure it doesn't obstruct the driver's view. 2. Avoid using overly dark film on the side windows, as it may impair the driver's ability to judge surroundings at night. 3. When applying film to the driver and passenger side windows, it's advisable to leave a triangular area near the rearview mirrors. This allows for better visibility and helps prevent safety hazards caused by an obstructed view of vehicles behind.
Was this review help?
9
2
Share
More Forum Discussions

What's the reason for one car door not opening?

The reasons for a car door not opening are as follows: 1. The remote key is out of battery: If the door cannot be opened using the remote key, it is likely that the remote key is out of battery, the car battery is dead, or there is strong signal interference nearby. Generally, the remote key has a hidden mechanical key inside. 2. If you have the mechanical key but cannot find the keyhole on the door, it is because the manufacturer has hidden the keyhole for aesthetic reasons. 3. In this case, you need to carefully observe the door handle. Usually, there is a decorative piece at the end of the handle that is about the size of the key. You can pry it open to reveal the keyhole.
12
4
Share

How to Adjust for Vehicle Skidding?

When a moving vehicle experiences lateral movement of one or both axles due to braking, rotational inertia, or other reasons, it is referred to as skidding. Vehicle skidding poses a significant threat to safe driving, often leading to severe traffic accidents such as collisions, rollovers, or running off the road. Emergency adjustment methods for vehicle skidding are as follows: 1. When the vehicle skids, slowly release the accelerator pedal and gently steer the wheel in the direction of the skid to adjust the vehicle's position and prevent further skidding. Once the vehicle is straightened, continue driving. 2. If the skid is caused by steering, avoid using the service brake or making erratic steering inputs, as this can lead to severe skidding. If a major skid occurs, stop the vehicle safely as soon as possible, inspect the vehicle, and identify the cause. When turning at high speeds, the centrifugal force increases, making the vehicle more likely to run off the curve or skid. Emergency braking at speeds exceeding 60 km/h can easily cause skidding or fishtailing. 3. If the skid is caused by braking, immediately stop braking and steer the wheel toward the direction of the skid. Avoid steering too abruptly or for too long, as this may cause the vehicle to slide in the opposite direction. After stopping braking, the wheels will no longer be locked, improving lateral traction. Steer the wheel toward the skid direction to increase the turning radius, reducing centrifugal force and thereby mitigating the skid. Once the vehicle is straightened, smoothly return the steering wheel to its original position. 4. When driving on surfaces with low traction, especially when rain mixes with dust to form mud, the vehicle is most prone to skidding. Emergency braking or sharp steering on muddy or slippery roads can cause loss of control, skidding, or even rollovers, crashes, or collisions with other vehicles or pedestrians. When driving on muddy roads, drive at a lower speed uphill, minimize steering adjustments, and correct promptly. Avoid emergency braking downhill; instead, apply the brake gently and use engine braking to control speed as needed. Never coast in neutral. To reduce the likelihood of skidding, drive along existing tire tracks, avoid sudden acceleration or deceleration, and refrain from sharp steering. Additionally, drive cautiously and avoid reckless high-speed driving to minimize the risk of skidding.
16
1
Share

What is the best engine oil for the first maintenance of Qashqai?

Use Dongfeng Nissan's original engine oil, which is formulated according to the vehicle's performance requirements. As long as it is replaced regularly according to the manufacturer's maintenance manual requirements, it is acceptable. Alternatively, cost-effective full synthetic engine oil can also be used. The choice of engine oil mainly depends on the actual condition of the vehicle. The following is extended information about car engine oil: 1. The first car maintenance item is to change the engine oil and oil filter, and a comprehensive inspection and diagnosis of the vehicle's condition and usage will be conducted. The first car maintenance time is between 3-5 months, and the first maintenance mileage is between 3,000 kilometers to 5,000 kilometers, or even up to 8,000 kilometers for some cars, due to differences in the specific technical conditions of the vehicles. 2. The engine and the new car have a break-in period. Different brands and models of cars are equipped with different engines. Some engines use special technologies and have strict requirements for engine oil; some engines have special materials and high precision, resulting in relatively less wear, so the engine oil replacement cycle needs to be referenced based on the production date.
17
3
Share

How to Identify the Year of a Car?

Every car has a nameplate indicating its manufacturing date. Typically, there are two such nameplates: one located in the engine compartment and the other on the side of the driver's door. The manufacturing date of the car is clearly marked on these nameplates. Additionally, there are three other methods to determine the car's production date: 1. Check the VIN (Vehicle Identification Number) under the windshield: The 10th digit of the VIN represents the car's production date, and each car has a unique VIN. 2. The vehicle identification code consists of 17 characters, with the 10th digit from the left indicating the manufacturing time, allowing for a more accurate determination of the car's age. 3. Look at the car's VIN code: Each VIN code represents a unique vehicle, commonly referred to as the vehicle identification number or chassis number. The VIN code can be found under the front windshield, and its 10th digit indicates the car's production date.
19
4
Share

What to Do When Car Electronic Key Fails?

Solutions for car electronic key failure: Every remote key comes with a mechanical key, which can be used to open the car door: 1. Slide the safety switch on the remote key. There is a safety switch on the remote key; sliding it will reveal the hidden mechanical key. Remove the mechanical key. 2. Insert the mechanical key into the car door lock to open the door. You need to apply a bit of force when turning the mechanical key. Hearing an unlocking sound indicates that the car lock has been released. Possible causes and solutions for car electronic key failure: 1. The car electronic key may fail due to a dead battery. Solution: Replace the key battery with a new one promptly. 2. The car key or the car's anti-theft system may be malfunctioning. Solution: Take the car to a 4S shop for inspection and repair by a professional. 3. It may be caused by signal interference. Solution: If possible, switch to manual locking immediately. If manual locking is not available, move the car a certain distance before locking it. Also, be aware of any suspicious individuals nearby. If there are suspicious people around, call the police or seek help from the radio management department immediately.
7
4
Share

How to reset the maintenance light on a 2016 Octavia?

Turn off the ignition, press and hold the "0.0/SET" (reset/set) button on the instrument panel, then turn on the ignition while continuing to hold the "0.0/SET" button with your left hand. When one of the following messages appears on the instrument panel display, release the "0.0/SET" button. Here is additional information about car maintenance: 1. Car maintenance refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as a preventive measure, also known as car servicing. 2. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.