Is it necessary to apply film on the front windshield?

2 Answers
McAshley
07/24/25 2:35am
It is not necessary to apply film on the front windshield. Here is an introduction to the relevant knowledge about car window film: 1. Definition: Car window film refers to applying a thin film-like material to the front and rear windshields, side windows, and sunroof of a vehicle. This film is also known as solar film or heat-insulating film. 2. Functions: The main functions are to block ultraviolet rays, reduce heat, prevent injuries caused by flying glass fragments, reduce glare, and protect personal privacy based on the one-way transparency of the film. Additionally, it can minimize damage to interior items and passengers caused by UV exposure, lower the interior temperature through physical reflection, reduce the use of car air conditioning, thereby decreasing fuel consumption and saving some expenses.
Was this review help?
13
3
Share
AnastasiaRose
08/10/25 10:12pm
As a veteran driver who frequently takes long-distance trips on highways, I believe front windshield tinting is absolutely essential, primarily for safety considerations. The film provides additional protection - for instance, if the glass shatters, the film can hold the fragments together to reduce flying debris hazards, which could be life-saving in accidents. UV protection is equally crucial, as prolonged exposure to sunlight while driving can damage eyes and skin; quality films block over 99% of harmful rays. Glare reduction is another benefit, particularly when facing dazzling headlights at night, as the film softens harsh light to improve visual clarity. Of course, it's vital to choose high-quality films that meet light transmittance standards (China requires over 70%) to avoid illegal modifications. After two years of using mine, I drive with greater peace of mind, remaining composed during rainstorms or intense sunlight. Ultimately, safety comes first, making this investment truly worthwhile.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Why is the motorcycle lacking power?

The reasons for a motorcycle lacking power are: 1. Fuel supply system issues, clogged air filter, or a carburetor that hasn't been cleaned for a long time can lead to decreased engine combustion efficiency, with severe cases even causing black smoke from the exhaust pipe; 2. Engine faults, such as normal wear of the cylinder and piston rings, artificial damage, clutch slippage, incorrect valve timing, or excessively small valve clearance. The working principle of a motorcycle engine is similar to that of a car engine, with most motorcycles equipped with a four-stroke engine. A four-stroke engine operates in four strokes: intake stroke, compression stroke, power stroke, and exhaust stroke. Scooter motorcycles do not require gear shifting, whereas straddle motorcycles do.
15
2
Share

How many kilometers can a 48L fuel tank drive?

If the fuel tank capacity is around 50L, and assuming a relatively fuel-efficient consumption of 8L/100km, it can generally run for over 600 kilometers. Fuel tank capacity: Most automobile manufacturers follow a general rule that a full tank of fuel typically supports a driving range of around 600 kilometers, not less than 500 kilometers. After the fuel warning light comes on, it is still safe to drive within 20 kilometers. Beyond this range, one should drive cautiously and preferably prepare gasoline in advance. Precautions: According to relevant highway regulations, urban areas usually have gas stations every 10-20 kilometers, while highways have gas stations every 40 kilometers. Based on the layout and distance of gas stations along the route, plan your refueling stops reasonably.
7
1
Share

What to Do When a Car Is Flooded?

If your car is flooded, you should disconnect the battery power and notify the insurance company. Here are the specific steps: 1. Disconnect the battery power: Before the rescue tow truck arrives, it is best to disconnect the vehicle's battery power as soon as possible, usually by removing the negative terminal of the battery and shifting the transmission to neutral. This helps prevent accidental startup during towing, which could further damage the vehicle. 2. Notify the insurance company: If the vehicle is submerged in water, notify the insurance company immediately. However, sometimes the insurance personnel may not arrive on time, so the owner or policyholder should take photos of the flooded scene with a camera or phone as evidence for the claim.
1
2
Share

What's the matter with the headlight range control malfunction?

It may be due to a damaged body height sensor, which is primarily used to collect body height signals for the control unit to adjust the headlight level. Check whether the headlight connector and the adjustment motor connector are functioning properly. Also, inspect if the headlight level sensor on the suspension is damaged. Introduction to the vehicle height sensor: Used in automotive air suspension and active suspension systems, its function is to detect the body height (the relative displacement between the body and the lower suspension arm or shock absorber lower bracket in the vertical direction). Power supply inspection: Disconnect the sensor connector, turn on the ignition switch, and check that the voltage at the power terminal of the wiring harness connector should be 12V.
20
5
Share

How Long Does It Take for a Motorcycle to Complete the Break-in Period?

New motorcycles generally have a break-in period of 1,500 kilometers. Oil Change Method During the Initial Break-in Period: There are various methods for changing the oil within this 1,500-kilometer range. It is recommended to change the oil at 300 kilometers, 600 kilometers, 1,000 kilometers, and 1,500 kilometers. How to Ride the Motorcycle During the Initial Break-in Period: For the first 600 kilometers, maintain the gear speeds as follows: first gear at 10 km/h, second gear at 20 km/h, third gear at 30 km/h, fourth gear at 35 km/h, and fifth gear at 40 km/h. Shift gears repeatedly, moving from first to fifth gear and then back down from fifth to first gear.
6
3
Share

Why is there a noise when rotating the rear wheel of a motorcycle?

The reasons for noise when rotating the rear wheel of a motorcycle: bearing damage, severe wear of components. Bearing damage: Lift the motorcycle stand, stand on the side with the chain and sprocket, hold the rear shock absorber with your left hand, grab the rear wheel with your right hand, and swing the rear wheel left and right (i.e., move it toward the left and right shock absorbers). If you feel a gap between the rear wheel and the rear axle (i.e., the rear wheel seems to wobble left and right), it indicates the bearing is faulty and needs replacement. Severe wear of components: The clutch is excessively worn and should be replaced promptly; the pulley is severely worn; gear wear (caused by insufficient oil in the gearbox or long-distance driving); wear of the rear drum brake.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.