Is It Necessary to Apply Film on the Car's Front Windshield?

3 Answers
StAdalynn
07/28/25 10:52pm
Applying film on the car's front windshield is necessary. Here are the benefits of applying film to the front windshield: 1. Applying film to the car's front windshield is beneficial because it effectively blocks ultraviolet rays from outside the car, preventing excessively high temperatures inside the vehicle during summer, which could otherwise affect the driver's comfort. 2. After applying the film, it reduces the impact of oncoming vehicle lights on the driver's vision during nighttime driving, thereby improving driving safety. Here are some precautions for applying car film: 1. When applying the film, the color of the film for the front windshield should be slightly lighter, or a colorless glass film should be used. It is crucial not to obstruct the driver's view when applying the film to the front windshield. 2. The film on the four door windows should not be too dark, as it may impair the driver's judgment of the surroundings at night. When applying film to the front driver and passenger windows, it is advisable to leave a triangular area near the rearview mirror. This allows the driver to better observe the rearview mirror and prevents safety hazards caused by an inability to see vehicles behind.
Was this review help?
11
0
Share
DanielLee
08/12/25 3:19am
As a veteran driver with over 20 years of experience, the first thing I do after buying a new car is applying front windshield film. The biggest advantage is explosion-proof protection - last year a flying stone hit my windshield, but the film held all the fragments together, preventing glass shards from flying into my face. During summer drives when the sun scorches overhead, quality films block over 70% of heat and UV rays, protecting both my eyes from strain and my skin from tanning. Three key selection tips: Light transmittance must exceed 70% to meet national standards (low-quality films create fog-like visibility at night); avoid metallic reflective films that interfere with GPS signals; find installers with 10+ years experience for the curved windshield, as insufficient edge margins may cause cold weather cracking. This investment delivers both safety and comfort.
Was this review help?
15
3
Share
Expand All
BentleyLynn
08/12/25 3:20am
Just had the front windshield film installed on my new car, and based on my experience in automotive decoration, let me share some details. The most noticeable effect after installation is temperature reduction—after an hour of midday sun exposure, the steering wheel in a car without film becomes too hot to touch, whereas with the film, the thermometer shows about 9°C lower. Nowadays, mid-to-high-end films come with nano-ceramic layers that don’t block phone signals and also reduce glare. Pay special attention to the warranty period; major brands typically offer a ten-year warranty, covering free replacement for bubbles or discoloration. Cost-wise, a thousand-yuan-range film like Llumar is sufficient, while top-tier options like V-KOOL can cost three to four thousand but offer over 50% heat insulation. I recommend avoiding dark tints as they can cause mirror reflections that impair visibility—light gray is the most versatile choice.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

How to Turn on the High Beam on a Cruze?

The method to turn on the high beam on a Cruze is: push the left control lever towards the driver's direction to activate it. The high beam emits parallel light, which is more concentrated and brighter, allowing it to illuminate distant and high objects. The dimensions of the Cruze are: length 4450mm, width 1807mm, height 1459mm, with a wheelbase of 2700mm and a fuel tank capacity of 52 liters. The Cruze is equipped with a 1.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 84 kilowatts and a maximum torque of 146 Newton-meters. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
18
3
Share

Where is the thermostat located in the 8th generation Sonata?

The thermostat in the 8th generation Sonata is located at the water pump inlet. The thermostat is a valve that controls the flow path of the coolant and serves as an automatic temperature-regulating device. Typically, the thermostat contains a temperature-sensing component that opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. The 8th generation Sonata measures 4820mm in length, 1835mm in width, and 1475mm in height, with a wheelbase of 2795mm. In terms of features, the 8th generation Sonata is equipped not only with a panoramic sunroof but also with advanced technological configurations rarely seen in mid-to-high-end models, such as the VSM vehicle stability control system, TPMS tire pressure monitoring system, HAC hill-start assist system, and ESS emergency brake reminder system.
9
1
Share

What are the symptoms of a bad axle shaft?

The symptoms of a bad axle shaft are: abnormal vibration occurs when the car is driving, and it can also cause abnormal noises while the car is in motion. If the axle shaft is damaged, it needs to be replaced immediately. The axle shaft is the component that transmits power to the wheels. Without the axle shaft, power cannot be transmitted to the wheels. The axle shaft may become deformed or fractured. If the axle shaft is fractured, it needs to be replaced. If it is deformed, it also requires replacement. The axle shaft has a CV joint, which is also relatively prone to damage. There is a rubber dust boot outside the CV joint. This rubber dust boot prevents dust from entering the CV joint and also prevents the lubricating oil inside the CV joint from leaking.
11
4
Share

Does the Tiguan L use a dry or wet clutch?

The Tiguan L uses a wet clutch. The Tiguan L has dimensions of 4712mm in length, 1839mm in width, and 1673mm in height, with a wheelbase of 2791mm. In terms of safety features, the Tiguan L comes standard with an ESP vehicle stability system and front side airbags. The top-of-the-line flagship model includes a pre-collision safety protection system, knee airbags, a lane-keeping system, a 360-degree parking camera, and a HUD head-up display system. The Tiguan L offers two powertrain options: the 330TSI and 380TSI, equipped with the third-generation EA888 turbocharged engines in 1.8T and 2.0T displacements, respectively. The former delivers a maximum output of 180 horsepower and a peak torque of 300 Nm, while the latter provides a maximum output of 220 horsepower and a peak torque of 350 Nm.
3
5
Share

What Are the Reasons for a Car Spark Plug Not Firing?

Reasons for a car spark plug not firing: 1. Improper spark plug gap adjustment: If the gap is too small, it limits the contact area between the spark and the air-fuel mixture; if the gap is too large, the ignition system may not provide sufficient voltage to create a spark between the electrodes. 2. Cracked spark plug skirt: High-voltage current leaks through the crack, preventing sparking at the electrodes. 3. Low spark plug insulation resistance: This phenomenon reduces the ignition voltage applied to the spark gap, weakening the spark or even completely disabling the ignition function. 4. Short circuit in the high-voltage wire: If the high-voltage ignition wire from the ignition coil to the distributor is short-circuited, the entire engine may fail to start; if the wire from the distributor to the spark plug is short-circuited, the spark plug in one cylinder may not fire.
8
1
Share

How to reset the maintenance light on JAC Refine M5?

JAC Refine M5 maintenance light reset method: 1. Turn on the ignition switch, briefly press the right information display selector handle to set the information display screen to black screen; 2. Press and hold the left mileage button for more than 5 seconds until the oil lock display appears on the screen, then release the button, and the display area will show OIL for 2 seconds; 3. Release the button and immediately press it quickly 5 times within 3 seconds; 4. After OIL flashes 3 times and turns off, SUCESSFUL will be displayed. The JAC Refine M5 is powered by a 2.0T turbocharged engine with a maximum output of 177 horsepower and a peak torque of 260 Nm. In terms of the transmission system, it is paired with a 5-speed automatic transmission and adopts rear-wheel drive.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.