···
Log in / Register

Is it necessary to apply film on double-silver coated glass?

4 Answers
SophiaFitz
07/29/25 11:18pm

It is still necessary to apply film on double-silver coated glass. Introduction to coated glass: Coated glass, also known as reflective glass, involves coating one or multiple layers of metal, alloy, or metal compound films on the glass surface to alter its optical properties and meet specific requirements. Based on different product characteristics, coated glass can be categorized into the following types: heat-reflective glass, low-emissivity glass, conductive film glass, etc. Production methods of coated glass: Vacuum magnetron sputtering, vacuum evaporation, chemical vapor deposition, and sol-gel methods. Magnetron sputtering coated glass utilizes magnetron sputtering technology to design and manufacture multi-layer complex film systems, allowing for the application of various colors on white glass substrates. The film exhibits excellent corrosion resistance and wear resistance, making it one of the most widely produced and used products. Vacuum evaporation coated glass, in terms of variety and quality, falls short compared to magnetron sputtering coated glass and has gradually been replaced by vacuum sputtering methods.

Was this review help?
15
0
Share
Rita
08/16/25 1:43am

I think this is a pretty common issue. As someone who enjoys traveling with family, I particularly value comfort and safety when driving. The double silver-coated glass itself is excellent—it effectively blocks UV rays and heat, preventing the car from turning into an oven in summer and offering good skin protection. However, I still choose to apply a tint film because it adds privacy, making it harder for outsiders to see inside, which gives me peace of mind when my kids are in the back. The film also has anti-shatter properties, preventing glass fragments from flying in case of breakage, which is especially useful in minor accidents. An added benefit is glare reduction, making long drives easier on the eyes. When choosing a film, pay attention to light transmittance—lighter tints don’t affect nighttime driving. Once applied, it requires minimal maintenance; just be careful not to scratch it during car washes. Spending a little extra for safety is well worth it, and I recommend considering professional brands.

Was this review help?
5
5
Share
Expand All
SpencerDella
10/18/25 8:02am

As a young car owner, I value both personality and practicality in driving. The dual-silver coated glass already provides excellent heat insulation, reducing temperature fluctuations inside the car and protecting against UV damage. However, window tinting makes the car look cooler—I opted for dark tint for a stylish appearance and enhanced privacy, so others can't see what I have inside. The tint also reduces glare, making daytime driving more comfortable without needing sunglasses. From a safety perspective, high-quality film reinforces the glass against shattering, offering better protection in case of a collision. After tinting, the air conditioning works slightly more efficiently, saving a bit of fuel. The downside is the cost, ranging from a few hundred to over a thousand, and maintenance requires care to avoid scratches. For young people, this small investment for multiple benefits is quite worthwhile—just make sure to choose reputable brands and avoid cheap options.

Was this review help?
3
1
Share
Expand All
StTanner
12/01/25 8:37am

Having driven for many years and being frugal with household expenses, I find that double-silver coated glass provides sufficient functionality without the need for additional window film. It offers strong heat insulation and UV protection, and car manufacturers have already considered energy efficiency and safety in their designs. Spending extra on film is unnecessary and could waste hundreds or even thousands. If the film is of poor quality, it may darken nighttime visibility, posing risks. I once used light-colored film and found it troublesome when driving in the rain due to blurred vision. Cleaning windows also becomes more difficult after applying film, and improper washing can cause bubbles. If privacy or explosion-proofing is truly needed, opting for reinforced original glass is more economical. Saving this money to buy car accessories or for vehicle maintenance is much more practical. The best way is to keep life simple.

Was this review help?
7
4
Share
Expand All
More Forum Discussions

Do you need a driver's license to buy a car in full payment?

You don't need a driver's license to buy a car in full payment. To purchase a car, you only need an ID card, bank card, household registration book, residence certificate, income certificate, work certificate, marriage certificate, spouse's ID card, etc. Choosing a brand: For most people, choosing a suitable brand is crucial. For example, some prefer Japanese cars, some like German cars, some favor domestic cars, while others may prefer less popular Korean or French cars. Each car series has its unique highlights, so it's important to find the car brand you like the most. Choosing a model: Car models can be divided into sedans, SUVs, MPVs, crossover vehicles, hatchbacks, etc. You need to choose the most suitable model based on your personal needs and preferences. For instance, a compact and agile hatchback is ideal for personal commuting, while a spacious SUV is better for family users, and an MPV (often called a "dad car") is suitable for families with two children. Choosing a price range: Cars are consumables, so it's essential to choose a model within your financial means when selecting a car. Additionally, purchasing a car often involves paying purchase tax, vehicle and vessel tax, insurance, and license plate fees. Therefore, it's crucial to consider the total cost of the car to avoid budget shortfalls.
7
0
Share

What Are the Brands of Brake Pads?

Brake pad brands include Bosch, Jurid, Ferodo, Safeway, TMD, Akebono, Wagner, Gold Phoenix, ACDelco, Sumitomo, etc. Classification of brake pads: Asbestos brake pads, semi-metallic brake pads, low-metallic brake pads, NAO formula brake pads, ceramic brake pads, NAO ceramic brake pads. Advantages and disadvantages of brake pads: In traditional brake pads, metal is the main material that generates friction, providing strong braking force but with significant wear and a tendency to produce noise. After installing ceramic brake pads, no abnormal squealing (clicking sounds) occurs during normal driving. Since ceramic brake pads do not contain metal components, they avoid the metal screeching noise caused by the friction between traditional metal brake pads and their counterparts. Friction coefficient of brake pads: Ordinary brake pads have immature friction materials, and a friction coefficient that is too high can lead to unsafe factors such as loss of control during braking, pad burning, and scratching of the brake disc. Even when the brake disc temperature reaches as high as 650 degrees, the friction coefficient of ceramic brake pads remains around 0.45-0.55, ensuring the vehicle maintains good braking performance.
18
0
Share

Why Has the Car's Noise Increased?

The reasons for increased car noise are as follows: Engine Overheating: Engine overheating can cause a loss of power. If the engine operates for an extended period, leading to surface overheating, the cooling system may fail. The first step in this situation is to check the cooling system. If there is an issue with the cooling system, it could lead to exhaust blockage, as the vacuum tube might be broken. Internal Engine Problems: Internal engine issues, such as valve blockage, may not show obvious external symptoms while driving. However, if you notice a lack of power when accelerating, it could indicate an engine problem. This is because when the throttle is increased, the engine's RPM rises, but the speed does not increase, suggesting internal engine issues. Fuel Quality Issues: If the engine makes a "popping" sound, it is recommended to change the engine oil. Another unpleasant engine noise is most likely due to the engine being too hot or too cold, or it could be caused by insufficient oil. Cylinder Valve Problems: If the engine produces a sound similar to a tapping noise, it is mostly due to cylinder valve issues. During operation, if the engine emits a dull tapping sound, it could indicate a problem with the cylinder valves.
6
1
Share

How Long Can You Drive with Low Brake Fluid?

It is recommended not to continue driving when the brake fluid is low, as insufficient brake fluid can lead to brake failure. Below are detailed explanations of why you should not continue driving and important usage precautions: Reasons to avoid continued driving: Brake fluid transmits the driver's braking force to the vehicle's brakes. The quality and proper use of brake fluid directly affect the braking performance and driving safety. When the brake fluid is insufficient, you must not continue driving, as air can enter the brake lines or wheel cylinders. Since air is compressible, it can cause insufficient pressure in the wheel cylinders, resulting in inadequate or failed braking. Brake fluid usage precautions: If gasoline, diesel, or windshield washer fluid mixes with the brake fluid, it can severely impair braking performance, and the fluid should be replaced immediately. Under normal driving conditions, brake fluid should be replaced every 40,000 kilometers or after two years of continuous use, as prolonged use can cause the fluid to deteriorate. Vehicles equipped with a brake fluid level warning system should have the warning light monitored regularly to ensure the sensor is functioning properly. When the brake fluid is low, it should be replenished promptly. The stored brake fluid level should always be maintained between the minimum and maximum capacity marks.
13
4
Share

Can You Shift Directly from Fifth Gear to First Gear in a Manual Transmission?

It is possible to shift directly from fifth gear down to first gear, but in most cases, many drivers do not adopt this practice. In such a scenario, it is necessary to apply the brakes. Failing to do so can subject the transmission and engine to significant shock. Additionally, the vehicle's speed will drop sharply, and the high speed will cause the engine's RPM to surge abruptly. Principles of Downshifting: The general rule for operating the transmission is: upshifting should be done sequentially, while downshifting can be performed by skipping gears. Shift from a higher gear to a lower gear that can maintain appropriate torque based on the current speed. Scenarios for Skipping Gears When Downshifting: One is naturally downshifting when the speed decreases to a certain extent, and the other is forced downshifting, also known as "grabbing a gear." Generally, you should first use the brakes to reduce the speed to a level suitable for the lower gear before downshifting; otherwise, it can cause significant damage to the transmission.
3
0
Share

What engine does the new Santana use?

The engine of the new Santana is developed by the Volkswagen Group and produced by FAW-Volkswagen Engine (Chengdu) Co., Ltd. The engine model of the new Santana is EA211, with a maximum power of 82kw, a maximum torque of 145 Nm, and a maximum horsepower of 112. For daily maintenance of the new Santana's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and the usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid faults, the oil should be changed regularly according to the usage conditions, and the oil quantity should be moderate; When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to pass through the bypass valve and still bring dirt back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it suspends in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.