Is It Necessary to Apply Engine Oil on a Sponge Filter?

Is it a single press or a long press for a one-button start car?

A one-button start car requires pressing the one-button start key once. The operation method is as follows: 1. Use the central control to open the car door. Press the one-button start key once, and after the dashboard lights up, press it again while stepping on the brake to start the car. 2. The functions of the one-button start intelligent system include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-button start, one-button shutdown, automatic locking before driving, and automatic unlocking and opening of the trunk when parking and shutting down. Below is additional information: Disadvantages of the car one-button start system: 1. Separation of the key and the car is the most common issue. Forgetting the key or leaving it in someone else's bag or pocket can prevent the car from shutting down after getting off halfway, requiring retrieval of the key. 2. Uncertainty about whether the car is locked. If the distance is too close, such as parking the car very near the house, the car can be started. However, most settings have reduced the sensing distance to solve this problem.

18

0

Share

How to Identify Whether a Car is a Stock Vehicle

There are several methods to determine whether a car is a stock vehicle, as follows: 1. Check the date on the vehicle's nameplate to identify the manufacturing time. Generally, the nameplate is located on the side of the engine or on the right door. If the production date exceeds 6 months, the car is usually considered a stock vehicle. 2. Examine the vehicle's nameplate. The nameplate contains various information, including the engine model, engine displacement, and the car's production date. The nameplate is typically located on the side of the engine, sometimes in a hidden spot. Some nameplates are also found on the left side of the right door when opened. Additionally, for vans, the nameplate is usually on the pillar behind the front passenger seat. 3. Check the production date of the front windshield glass. Unless the glass has been replaced due to damage, the production date of the glass should not differ significantly from the car's overall production date. 4. Look at the vehicle identification number (VIN). Below the front windshield, there is a 17-digit VIN code, also known as the chassis number.

14

2

Share

Why is the Car Film Applied on the Outside

Car film should be applied on the inside of the car. Actually, the film is not applied on the outside; it is only placed there temporarily. It is more convenient to cut the film on the outside of the glass because the interior space is limited, making it difficult for the technician to maneuver and operate. Cutting the film on the outside ensures greater precision and convenience. The steps are as follows: 1. When going to get the car film applied, first check the environment where the film will be applied, as dirt or debris might get trapped under the film. Therefore, it is best to choose an enclosed environment. 2. When applying the film, make sure it is genuine by checking the anti-counterfeit label. 3. The most challenging parts to apply the film are the front and rear windshields due to their curvature. To avoid bubbles, it is recommended to ask the installer to divide the film into smaller sections. 4. After application, carefully inspect for any defects. Sit inside the car and check if the edges are lifting or if they obstruct the driver’s view. 5. Request a warranty card. The reasons for not applying the film directly on the outside of the glass are as follows: 1. It gets dirty easily and is inconvenient to clean. 2. It is prone to damage, not just from human factors but also from external elements. 3. It ages faster due to the harsh and variable outdoor conditions, which accelerate the film’s deterioration.

19

3

Share

Does idling with the AC on damage the car?

Idling with the AC on can harm the vehicle. The reasons and solutions are detailed below: 1. When idling with the AC on, the engine not only drives the AC compressor but also maintains the normal operation of the power steering and brake booster pumps. The latter two functions are completely unnecessary when the car is parked, and keeping them running is a waste of power. 2. The fuel consumption of idling with the AC on is related to the car's displacement and even the engine tuning. According to relevant tests, for most common household cars, idling with the AC on for about an hour consumes approximately 1-2 liters of fuel, though this may vary by model. 3. Recommendation: Avoid keeping the AC on continuously, as the lack of air circulation inside the car can lead to the accumulation of carbon monoxide from the engine exhaust if it leaks into the cabin, potentially causing poisoning.

9

0

Share

Why Does Water Drip from the Exhaust Pipe When Starting the Car?

Water dripping from the exhaust pipe is caused by the evaporation of water vapor from gasoline during combustion and condensation. It is a normal phenomenon for a car's exhaust pipe to drip water. Here are the detailed explanations: 1. It indicates that the fuel is fully burned in the engine, causing water to drip from the exhaust pipe. This happens because the ambient temperature is relatively low. After combustion, fuel produces water and carbon monoxide. At high temperatures, water exists as vapor, which condenses in the exhaust pipe and muffler. 2. When the ambient temperature is high, the water vapor is expelled before it can condense. 3. When the ambient temperature is low, the water vapor condenses into water droplets on the walls of the exhaust pipe and flows out, especially in winter. During winter, the external environment is colder, and the air humidity is higher. After the vehicle is running, the temperature difference between the inside and outside of the engine is greater, making it more likely for water to drip from the exhaust pipe. 4. Many car models have a small hole at the lowest point of the exhaust pipe. The purpose of this hole is to drain water, as the main component of the exhaust pipe is iron. If water is not drained in time, it can cause the exhaust pipe to rust and become damaged. A damaged exhaust pipe will produce abnormal noises. To prevent this issue, the exhaust pipe is designed with a drainage hole.

20

5

Share

What Causes Rapid Consumption of Car Antifreeze?

Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing, boiling, scale formation, and corrosion. The reasons for rapid consumption of car antifreeze and their solutions are as follows: 1. Radiator damage, with poor sealing of the upper and lower water chambers causing coolant leakage. Solution: Replace the radiator. 2. Cylinder head gasket damage or poor flatness, warping of the joint surface between the cylinder head and cylinder block, and loose cylinder head fastening bolts. Solution: Replace the cylinder head gasket or tighten and seal the cylinder properly. 3. Loose connections and poor sealing at the overflow tank, water pump joint surface, and various pipe fittings in the cooling system. Solution: Regularly inspect all sealing points and connections of the coolant, ensuring to tighten where necessary without exceeding the specified tightening force.

13

3

Share

Is It Necessary to Apply Engine Oil on a Sponge Filter?

Is it a single press or a long press for a one-button start car?

How to Identify Whether a Car is a Stock Vehicle

Why is the Car Film Applied on the Outside

Does idling with the AC on damage the car?

Why Does Water Drip from the Exhaust Pipe When Starting the Car?

What Causes Rapid Consumption of Car Antifreeze?

Is Tire Shine Harmful to Tires?

How Long Can Tires Be Used?

Is Wheel Balancing Necessary During Tire Rotation?

What does the car's ECO prompt mean?