Is it necessary to apply a protective film on the side mirror housing?

1 Answers
MacNorah
07/25/25 11:02am
In the absence of other reasons, you can apply a protective film to the side mirror. The functions of the side mirror waterproof film: Waterproofing is the most important function of this side mirror film. In addition, it also has effects such as oil resistance, anti-fogging, scratch resistance, and anti-glare from high beams. The principle of the side mirror waterproof film: The side mirror water repellent (not called rainproof film), also known as glass rainproof film, has a very simple principle. It forms a layer of film on the glass surface, allowing rainwater to slide off quickly. In fact, applying dishwashing liquid or toothpaste can also achieve this effect, but the duration will be shorter. Using products specifically designed for glass will be much more effective.
Was this review help?
4
4
Share
More Forum Discussions

What is the weight of the Jeep Cherokee?

The Jeep Cherokee currently has 7 models on sale, with a total vehicle weight ranging from 1710kg to 1975kg. It is a 5-door, 5-seat SUV with dimensions of 4669*1865*1691mm. In the same class, the Tiguan L 2022 model has a total vehicle weight of 1665kg, while the Highlander 2022 model weighs 1930kg. In terms of power, the 2021 Cherokee features an 80th Anniversary Edition model. It is equipped with a 2.0L turbocharged engine and a 9-speed automatic transmission. The engine has 4 cylinders in a transverse layout, with a front-engine, four-wheel-drive configuration. Other configurations for the 2021 Cherokee include, in all or some models, front and side airbags, front/rear head airbags (curtains), ISOFIX child seat anchors, driving assistance imaging, automatic parking, and driving mode switching. It's important to note that the Cherokee sold in China is known as the Jeep Cherokee overseas, and the current models are the fifth-generation mid-cycle refresh. The exterior and powertrain have undergone some changes, with the most noticeable being the replacement of the split headlights with a single-unit design. The powertrain has also been updated from a naturally aspirated engine to a turbocharged engine.
19
1
Share

Where is the Mercedes-Benz GLC produced?

Mercedes-Benz GLC is produced in Germany. Mercedes-Benz: Mercedes-Benz is a German luxury automobile brand, the inventor of the automobile, and is considered one of the most successful high-end car brands in the world. Its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models are highly praised. The Mercedes three-pointed star has become one of the most famous automobile and brand logos in the world. Mercedes-Benz Headquarters: The Mercedes-Benz headquarters is located in Stuttgart, Germany, producing approximately 1 million vehicles annually. It has 14 direct factories domestically, 35 main subsidiaries, and over 100 sales and service stations. Internationally, it owns more than 50 production and assembly plants and over 6,300 agencies and maintenance centers, with products sold in more than 190 countries and regions.
18
0
Share

What type of engine oil should be used for the Yuexiang V7?

The Yuexiang V7 requires semi-synthetic or higher grade 5W30 engine oil. Semi-synthetic oil: It is a blended product made by mixing mineral oil and fully synthetic oil in a certain proportion, with additives added. It performs better than mineral oil, offering a balanced performance with high cost-effectiveness, and has an oil change interval of 7,500 kilometers. Oil grade: The oil grade model is a basic parameter indicated on the specifications marked on the oil container. The oil grade is a standard set by the American Petroleum Institute for engine oils. This grade is unrelated to the oil's quality or lubrication performance and is only used to indicate the oil's environmental standards. Oil model: The oil model refers to the viscosity grade of the oil. The 'W' stands for winter, with the number before it indicating the oil's low-temperature fluidity, and the number after 'W' representing the oil's viscosity grade at 100 degrees Celsius.
5
3
Share

Why is one side of the BMW X5 daytime running light not working?

BMW X5 daytime running light has one side not working for the following reasons: Circuit fault: One side of the BMW X5 daytime running light may not be working due to a short circuit in the wiring on that side, such as: aging wires, poor contact at the connector, etc., which can cause this situation. Daytime running light bulb failure: Damage to the daytime running light bulb can also cause this situation. In this case, you can go to a 4S shop for repair or bulb replacement. Function of daytime running lights: Daytime running lights on cars serve both a decorative and a warning function. They significantly improve the visibility of the vehicle to other road users. The benefit is that vehicles equipped with daytime running lights allow road users, including pedestrians, cyclists, and other motorists, to detect and recognize the vehicle earlier and better.
15
2
Share

What type of oil does the Changan Alsvin V7 use?

The Changan Alsvin V7 uses semi-synthetic or higher grade 5W-30 oil. This type of oil offers good fluidity and lubricity, providing excellent protection for the engine. 5W-30 refers to the SAE standard viscosity rating. This viscosity rating first indicates that the oil is a multi-grade oil. The 'W' stands for WINTER, and the number before the 'W' represents the oil's flow performance at low temperatures—the smaller the number, the better the starting performance in cold conditions. The number after the 'W' indicates the oil's stability at high temperatures (i.e., its resistance to thinning). A higher number means better high-temperature stability. The Changan Alsvin V7 is a new compact sedan from Changan. The car's dimensions are 4530mm in length, 1745mm in width, and 1498mm in height, with a wheelbase of 2610mm.
5
2
Share

Does the new Geely Binyue need a break-in period?

Geely Binyue new cars require a break-in period, which is typically 3,000 kilometers. The duration of the break-in period may vary depending on the frequency of car usage. Below are some precautions regarding the car break-in period: First Maintenance: When the car reaches 5,000 kilometers, the first maintenance should be performed. After the first maintenance, the car will reach its most balanced state. Avoid High-Speed Driving: During the break-in period, avoid driving at high RPMs, as this increases the engine's load. Not only does it raise fuel consumption, but it can also damage the engine and reduce its lifespan. Use High-Quality Fuel: During the break-in period, try to use high-quality fuel to keep the engine in good working condition. This not only speeds up engine lubrication but also extends the engine's lifespan.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.