Is it necessary to apply a car wrap for a new car?

2 Answers
DiValeria
07/29/25 3:30am
It is necessary to apply a car wrap for a new car. Here are the relevant details: 1. The original factory paint on the car body is unique; if scratches occur later without an invisible car wrap, the touch-up paint used won't be the original factory paint, potentially leading to color discrepancies. 2. Advantages of applying a car wrap: New cars are prone to scratches due to unfamiliarity with the vehicle or poor driving skills. Applying an invisible car wrap can reduce the appearance of scratches, and small stones hitting the body while driving won't leave marks. The invisible car wrap contains a special material that can automatically repair itself to its original state when scratched by external objects.
Was this review help?
15
1
Share
SanRebecca
08/12/25 7:21am
As someone who frequently washes and maintains my own car, I think it's quite necessary to apply a paint protection film (PPF) on a newly purchased vehicle. Its primary advantage is the best scratch protection—whether it's branches scraping while parking, door edges in parking lots, or even small stone chips, the paint surface is less likely to get damaged. A high-quality transparent PPF material like TPU costs between 2,000 to 6,000 RMB, but it's cost-effective in the long run because a single paint repair can cost over a thousand RMB, which is too much hassle. Additionally, PPF blocks UV rays, preventing color fading and aging, keeping the car's shine intact for three to five years. Choosing a reputable brand and professional installer is crucial to avoid issues like bubbling or yellowing. Washing the car also becomes much easier, as stains wipe right off. Of course, if the budget is tight, you can wait and observe whether your driving environment is safe. Overall, applying PPF is a great way to protect your investment, but don't skimp on quality.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How to Turn on the Headlights of Borgward?

Method to turn on the headlights of Borgward: The headlight switch is located on the lighting control lever to the left of the steering wheel. Rotate the lever to the headlight symbol to turn them on. Headlights are mainly used for daily driving, nighttime, and poor visibility conditions to provide illumination and alert other vehicles, ensuring driving safety. Taking the Borgward BX7 as an example, this model is a mid-size car under the Borgward brand, with dimensions of 4715 mm in length, 1911 mm in width, and 1690 mm in height, and a wheelbase of 2760 mm. In terms of configuration, the car comes standard with a 12.3-inch LCD screen and is equipped with the BLink system, which enables functions such as requesting road assistance, locating the vehicle, checking vehicle status, sending navigation locations, and remote start.
4
2
Share

What to Do When a Wheel Gets Punctured by a Nail?

Solutions for a wheel punctured by a nail: 1. Place a warning sign: Park the car on the emergency lane or in a place where it does not obstruct other vehicles, and place a triangular warning sign 150 meters behind to alert oncoming traffic; 2. Check for air leakage: Apply soapy water to the punctured area and observe if bubbles form. Bubbles indicate air leakage, while no bubbles mean there is no leakage. Do not remove the nail; 3. Replace the spare tire: Do not continue driving. Instead, replace the tire with the spare on the spot. After changing the tire, drive to a repair shop promptly. If the nail is small, a simple tire repair may suffice.
8
4
Share

How to Replace the Spark Plugs on a Prado?

Prado spark plug replacement method: Remove the engine cover, clean the dust and oil around the high-voltage wire terminals, then use a socket wrench to loosen the fixing screws of the high-voltage wire terminals, unscrew the high-voltage wire terminals, use the socket to remove the spark plugs, and install the new spark plugs. The main types of spark plugs include: standard spark plugs, insulator-tip spark plugs, electrode spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs, etc. In terms of configuration, the Prado comes standard with ABS, ESC, tire pressure monitoring, cruise control, hill start assist, hill descent control, front and rear parking sensors, etc.
6
3
Share

Where is the car's air conditioning filter located?

The car's air conditioning filter is located behind the glove box, and in a few models, it is installed under the windshield on the passenger side. Under normal circumstances, it is recommended to replace the car air conditioning filter every 10,000 kilometers or about one year. If the vehicle is frequently driven in areas with severe air pollution, or if the owner pays more attention to the hygiene of the air conditioning and their own health, it is recommended to replace it every six months. The function of the air conditioning filter is to filter impurities such as dust particles in the air, providing clean air for the car's air conditioning system. It can improve air cleanliness, provide a good air environment for passengers in the car, and protect the health of the occupants.
7
1
Share

What is the reason for the heater not being hot after adding antifreeze?

After adding antifreeze, the heater not being hot may be due to a clogged radiator. Another possibility is that the cylinder head gasket has blown, causing the antifreeze to deteriorate. It is recommended to go to a 4S shop for maintenance and inspection. The car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the compartment, providing a comfortable environment for passengers, reducing the driver's fatigue, and improving driving safety. The full name of antifreeze is antifreeze coolant, meaning it is a coolant with antifreeze function. It can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head when the car is parked in cold winter.
4
3
Share

What is the correct way to stop at a red light with an automatic transmission?

When encountering a red light with an automatic transmission, the correct stopping methods are to shift into neutral and engage the handbrake, or to remain in D gear while applying the brakes. The neutral gear and handbrake method is suitable for situations where the light has just turned red or when there is a long remaining duration for the red light. Staying in D gear and applying the brakes is appropriate when the red light has about ten seconds left or during stop-and-go traffic, allowing for a prompt start without frequent gear changes. Automatic transmission vehicles automatically select the appropriate gear based on the car's speed and traffic conditions, adjusting the transmission according to the degree of accelerator pedal pressure and speed changes. The driver only needs to control the speed using the accelerator pedal.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.