Is it necessary to add gasoline additive for a new car?

1 Answers
MacCharlotte
07/30/25 1:37am
New cars do not need gasoline additive. The relevant introduction about 95 gasoline is as follows: Introduction to 95 gasoline: 95 gasoline is 95% isooctane and 5% n-heptane. When the engine compression ratio is high, high-octane gasoline should be used. If low-octane gasoline is used with a high compression ratio, it will cause abnormal combustion, resulting in knocking, increased fuel consumption, and weak driving performance. Introduction to refueling precautions: High-compression engines can use low-grade gasoline, but you should not blindly choose gasoline grade based on compression ratio. Instead, you should add the corresponding gasoline as required by the manufacturer.
Was this review help?
12
0
Share
More Forum Discussions

How Many Kilometers for the First Oil Change in a New Car?

New cars require their first oil change between 3,000 to 5,000 kilometers. Below are the items included in the first maintenance for a new car: 1. Oil change. 2. Oil filter replacement. 3. Full vehicle inspection. 4. Computer fault code diagnosis. 5. Body cleaning. 6. Check for paint cracks and peeling. Here is more information about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. 2. Modern car maintenance mainly includes the maintenance scope of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
2
0
Share

What is the Function of Engine Run-in Protector?

Engine run-in protector is a type of lubricating oil additive that provides strong protection for new vehicles during the break-in period, preventing severe engine damage such as cylinder scoring and bearing seizure. Additionally, engine run-in protector for new vehicles also offers benefits such as anti-wear, friction reduction, and fuel economy. The following is a detailed introduction: 1. Anti-wear: Engine run-in protector safeguards the internal components of the engine during high-speed operation, reducing temperature and noise, and extending the engine's service life. 2. Fuel economy: By enhancing the lubricity of the engine oil and reducing friction between components, it improves mechanical efficiency, thereby lowering fuel consumption. 3. Friction reduction: Engine run-in protector decreases the frictional resistance of internal engine components during movement and also improves the efficiency of cold starts. 4. Cleaning: The unique cleaning and dispersing properties of engine run-in protector can dissolve and remove carbon deposits and gum from areas such as piston rings and throttle valves, effectively protecting the engine's precision components.
11
2
Share

What are the main components of a car air conditioning system?

Car air conditioning consists of a refrigeration system, heating system, ventilation and air purification devices, and a control system. Here are some precautions for using car air conditioning: 1. Do not turn on the heating air conditioning immediately when warming up the car in the morning. Wait until the engine coolant temperature rises before turning on the air conditioning. 2. Do not set the air conditioning temperature too high. Prolonged exposure to excessively hot temperatures can cause drowsiness and affect driving. 3. If the airflow is weak, check if the air conditioning filter is clogged with too much dust. 4. During long-distance driving, ventilate the car periodically. Poor air circulation in a confined space can lead to breathing difficulties for passengers over time. 5. Turn off the air conditioning before parking and switch to the external circulation mode with natural air. This helps clean the air conditioning system's ducts and prevents bacterial growth.
16
5
Share

What is the displacement of the Volkswagen Passat 380TSI?

The displacement of the Passat 380TSI is 2.0L. The engine model is EA888-DKX, with a maximum output power of 162kW and a maximum torque of 350Nm. The engine type is turbocharged. An engine is a machine that converts other forms of energy into mechanical energy, such as internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Precautions for using car engines: 1. Difficulty in cold starting the engine is mainly due to the engine temperature being too low. Therefore, it is necessary to keep the engine warm and prevent cold wind from directly blowing into the engine compartment to avoid failure to start. When parking in winter, pay attention to the direction of the car's front. It is best to have the front of the car facing a building to use the building as a windbreak and prevent the engine from being overcooled by cold wind. 2. Engine stalling during gear shifting may be due to idle speed being too low, the idle cutoff valve not being tightened, the gear being too high, or the oil-gas separator being severely clogged. Normally, start in first gear, check if the idle cutoff valve is tightened and if the plug is securely connected. If necessary, clean the oil-gas separator. 3. Regularly clean the fuel system. During the process of supplying fuel to the combustion chamber through the fuel lines, it is inevitable that gum and carbon deposits will form, depositing in the fuel lines, carburetor, fuel injector, and combustion chamber, interfering with fuel flow, disrupting the normal air-fuel ratio, causing poor fuel atomization, and leading to engine shuddering, knocking, unstable idle, poor acceleration, and other faults. Using a strong and efficient cleaner to clean the fuel system and control carbon deposit formation can always keep the engine in optimal condition.
9
5
Share

Is the GM L2B engine based on Suzuki technology?

Is the GM L2B engine based on Suzuki technology? The durability and reliability of this engine are quite good, and it can be found in many models under the Chevrolet brand. Here is some extended information: 1. The 1.5-liter naturally aspirated engine in the Cavalier is the L2B engine. This engine has a maximum power of 83 kW, a maximum torque of 141 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4000 rpm. The engine is equipped with DVVT technology and uses an aluminum cylinder head and an iron cylinder block. 2. All-aluminum engines are lighter and have better heat dissipation performance, but aluminum cylinder blocks cannot withstand too high pressure and temperature. Although cast iron engines are heavier and have inferior heat dissipation performance compared to all-aluminum engines, they can withstand higher temperatures and pressures, making them more durable.
7
4
Share

Will points be deducted for crossing the line at a traffic light intersection?

When a vehicle crosses the line at a traffic light, if it has just slightly crossed the stop line but stops immediately, no points will be deducted. However, if there is significant movement after crossing the line, points will be deducted. Relevant information is as follows: 1. The three photos taken by electronic surveillance for running a red light are: the vehicle crossing the stop line, the vehicle reaching the middle of the intersection, and the vehicle arriving at the opposite intersection. Only when all three photos are present will it be considered running a red light, which results in a 6-point deduction under the new regulations. 2. When the red light is on, vehicles are prohibited from going straight or turning left. However, right turns are allowed if they do not interfere with pedestrians or other vehicles. When the green light is on, vehicles are permitted to go straight or turn. When the yellow light is on, vehicles must stop at the stop line or within the pedestrian crossing line, and vehicles that have already passed may continue. A flashing yellow light warns vehicles to pay attention to safety.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.