Is it necessary for the owner to be present for the annual vehicle inspection?

1 Answers
OLillian
07/29/25 3:06pm
For the annual inspection of motor vehicles, the owner does not need to be present. A representative can directly carry the relevant documents of the motor vehicle, including the vehicle registration certificate, compulsory traffic insurance policy, the original or a copy of the owner's ID card, and the representative's ID card, to the vehicle management office or the traffic management department of the public security authority to complete the procedure. Time frame for early annual vehicle inspection: The annual inspection of motor vehicles can be completed three months in advance, whether it is for vehicles that require on-site testing or those that do not. Completing the annual inspection of motor vehicles in advance helps ensure the normal use of the vehicle without any disruptions, as driving a vehicle with an expired inspection is illegal. Methods of annual inspection: There are two methods for the annual inspection of motor vehicles. The first method is through the mobile app "Traffic Management 12123," which is applicable to motor vehicles exempt from on-site testing. The second method is through the vehicle management office or the traffic management department of the public security authority, which requires an inspection at a vehicle testing facility.
Was this review help?
18
3
Share
More Forum Discussions

How to Check Engine Oil in a Car?

To check the engine oil in a car, follow these steps: 1. Locate the oil dipstick in the engine compartment and pull it out, then wipe off the oil traces with a cloth; 2. Reinsert the dipstick fully and then slowly pull it out again to check the oil traces on the dipstick; 3. If the oil level is between the upper and lower marks, the oil amount is appropriate. If the oil level is very close to or below the lower mark, you need to add oil as soon as possible. If the oil is overfilled beyond the upper limit, drain the excess oil from the oil pan. The functions of engine oil include: lubrication, assisting in cooling, cleaning, sealing to prevent leaks, rust and corrosion prevention, shock absorption, and reducing wear.
1
1
Share

Will a vehicle be automatically deregistered if it fails inspection for three years?

A vehicle failing inspection for 3 years (3 inspection cycles) will result in mandatory scrapping, but it will not be automatically deregistered. In such cases where the vehicle is forcibly scrapped due to inspection failure, the owner must not only send the vehicle to a recycling plant for scrapping but also complete the vehicle deregistration process. If this is not done within the stipulated time, the vehicle management office can legally declare the owner's registration certificate, license plate, and driving license invalid. According to relevant laws and regulations, China implements a mandatory vehicle scrapping system. Registered vehicles that fail to obtain an inspection compliance mark for 3 consecutive inspection cycles after the expiration of the inspection validity period must be forcibly scrapped. Three consecutive inspection cycles do not necessarily mean three years; this depends on the actual inspection cycle of the vehicle. For example, cars older than 15 years require a semi-annual inspection. If the owner fails to inspect the vehicle for 3 consecutive times (i.e., within 1.5 years), it will be forcibly scrapped. Refer to the following vehicle inspection regulations: Small and micro non-operational passenger vehicles must be inspected every 2 years within the first 6 years; annually after exceeding 6 years; twice a year after exceeding 15 years. Operational passenger vehicles must be inspected annually within the first 5 years; every 6 months after exceeding 5 years. Trucks and large or medium non-operational passenger vehicles must be inspected annually within the first 10 years; every 6 months after exceeding 10 years.
1
4
Share

What does Audi ABT mean?

Audi ABT refers to the official tuning manufacturer of the Volkswagen Group, and ABT is not a car model. Taking the 2021 Audi Q3 as an example, it belongs to the compact SUV category, with body dimensions of: length 4495mm, width 1848mm, height 1616mm, wheelbase of 2680mm, fuel tank capacity of 60 liters, and luggage compartment capacity of 450 liters. The 2021 Audi Q3 features a front suspension with MacPherson independent suspension and a rear suspension with multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
16
1
Share

What are the body dimensions of the Jinbei F50?

The body dimensions of the Jinbei F50 are: length 4745mm, width 1810mm, height 1845mm, with a wheelbase of 2860mm. Taking the 2020 Jinbei F50 as an example, it belongs to the MPV category, with a fuel tank capacity of 50 liters and a curb weight of 1480kg. The 2020 Jinbei F50 features a MacPherson independent front suspension and a leaf spring rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 118PS, maximum power of 87kW, and maximum torque of 154Nm, paired with a 5-speed manual transmission.
2
4
Share

Is the Soueast A5 Yiwu compliant with China VI emission standards?

The Soueast A5 Yiwu is compliant with China VI emission standards, and it is a compact car. Taking the 2019 Soueast A5 Yiwu as an example, its body dimensions are: length 4588mm, width 1780mm, height 1485mm, with a wheelbase of 2625mm, a fuel tank capacity of 50 liters, a trunk capacity of 450 liters, and a curb weight of 1210kg. The 2019 Soueast A5 Yiwu features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 120PS, a maximum power of 88kW, and a maximum torque of 143Nm, paired with a 5-speed manual transmission.
18
4
Share

What Does Chassis Tuning Refer to?

Chassis tuning refers to the adjustment of chassis parameters and suspension geometry by automotive engineers. The chassis is a combination of the transmission system, running gear, steering system, and braking system on a vehicle. It supports and mounts the car engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation. The functions of an automotive chassis include: 1. Corrosion prevention; 2. Stone chip protection; 3. Vibration damping; 4. Heat insulation; 5. Noise reduction; 6. Underbody protection. Methods for maintaining an automotive chassis are: 1. Regularly inspect the condition of the car tires; 2. Periodically clean and wipe the car chassis; 3. Promptly check the operation of various components during vehicle movement; 4. Regularly maintain and inspect the car's shock absorbers.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.