Is it mandatory to wear seat belts in the rear seats in Guangzhou?

1 Answers
StAlexandra
07/30/25 9:12am
It is mandatory to wear seat belts in the rear seats in Guangzhou. Seat belts are safety components used in equipment, such as when flying in aircraft, working at heights, or performing acrobatics, to ensure safety. The main materials used are polyester, polypropylene, and nylon. Seat belts do not only refer to the webbing; besides the webbing, seat belts are also assembled with other components. Traditional components that ensure safe driving include rearview mirrors, side mirrors, seat belts, airbags, and ABS. The function of seat belts is to reduce the possibility of death or serious injury in traffic collisions by minimizing the secondary impact force that poses an internal collision risk. They also ensure the maximum effectiveness of airbags by properly positioning the occupants and prevent occupants from being ejected from the vehicle or the vehicle from rolling over during a collision.
Was this review help?
15
2
Share
More Forum Discussions

Which car has the 'Song' character logo?

BYD's car logo features the 'Song' character. Here is some relevant information about the BYD Song: 1. Exterior: It adopts an X-shaped front grille, giving it a sporty appearance. On the side profile, the vehicle features concealed A/B/C pillar designs, creating a floating roof visual effect. 2. Powertrain: The BYD Song is equipped with a hybrid system consisting of a 1.5T engine and two electric motors. These two motors are positioned on the front and rear axles respectively, enabling all-wheel drive functionality.
16
1
Share

How to Clean Suede Leather Seats?

You can use a vacuum cleaner, universal foam cleaner, specialized suede leather cleaner, and professional softener for cleaning. When using a specialized suede leather cleaner, it is necessary to dissolve it in warm water first. Add the cleaner for dilution. After wetting the suede leather seats, start cleaning, and finally use a suede leather grooming brush to tidy up the suede. Place them in a well-lit environment to dry.
12
1
Share

Can a Cracked Rear Bumper Be Repaired?

After a car's rear bumper is cracked, it can be repaired. First, use a plastic welding gun to fix the crack by heating and melting the plastic welding rod and the surface of the film to achieve fusion and bonding. After repairing the crack, apply touch-up paint and then dry it to complete the repair. Here is some information about car bumpers: A car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. It acts as a buffer when the car or the driver is subjected to collision forces. Plastic bumpers consist of three parts: the outer panel, cushioning material, and crossbeam.
8
2
Share

How to Clean a Car Engine Bay?

Open the hood, cover the distributor, battery, and brake fluid reservoir with plastic sheets, then rinse the engine with a water gun. Rinse the air intake vents and remove dirt from the engine bay insulation. Use a flannel cloth dipped in water to clean the radiator, cooling fins, and condenser. Carefully wash the engine bay support bars with a water gun, and use an air gun to blow away dust particles inside the bay. Remove the plastic sheets and thoroughly dry all parts of the engine bay with a towel or flannel cloth.
3
4
Share

How to Adjust Car Audio Settings for Optimal Sound?

It is necessary to boost the bass and treble while reducing the mid-range to compensate for the weak reproduction capability of high and low frequencies by the audio equipment. Generally, increasing the mid-range and slightly lowering the treble and bass can achieve good results. Boost the bass and mid-range more, and adjust the left-right and front-rear balance according to personal preference. Set the bass to 80Hz, treble to 12.5K, subwoofer filter to 120Hz, bass Q value to 1.25, and mid-range to 1.5K or 2K.
3
2
Share

How to Reset the Maintenance Light on a Nissan Murano?

Here are the specific steps to reset the maintenance light on a Nissan Murano: 1. Insert the key, but do not turn it. 2. Press and hold the trip odometer reset button for 5-10 seconds, then turn the ignition to the "ON" position. 3. After another 5-10 seconds, start the engine. Keep holding the reset button throughout this process. 4. If the wrench indicator does not disappear, repeat the procedure several times. 5. Note that maintenance intervals vary by manufacturer and model. Refer to your vehicle's owner's manual for the correct maintenance schedule. After servicing, technicians can reset the maintenance light using the proper procedure.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.