Is it mandatory to wear glasses in driver's license photos for nearsighted individuals?

1 Answers
JoyFitz
07/29/25 6:40pm
It is mandatory to wear glasses in driver's license photos for nearsighted individuals. Daily driving precautions are as follows: 1. Carry emergency supplies: Equip your vehicle with emergency items such as a rescue hammer, fire extinguisher, and first aid kit. This not only enhances your sense of security while driving but also aids in self-rescue or assisting others in emergencies, serving as a crucial safety measure. 2. Check vehicle condition: Always inspect key components like tires, lights, and fluids before driving, and address any issues promptly. After driving on highways for more than two hours, take advantage of rest stops to check major vehicle parts, including tires, tire pressure, and engine oil. 3. Avoid reversing or U-turns on highways: Many rear-end collisions on highways are caused by drivers unfamiliar with the route, driving too slowly, reversing, or suddenly stopping. Plan your route in advance, use navigation, and pay attention to road signs, which typically provide exit reminders about 2 kilometers in advance. If you miss an exit, never reverse or make a U-turn; instead, proceed to the next exit and adjust your route accordingly. 4. Do not discard trash out of windows: At highway speeds, even a lightweight plastic bottle thrown from a vehicle ahead can shatter the windshield of a following car. Discarding trash on highways not only pollutes the environment but can also lead to severe accidents causing vehicle damage and fatalities.
Was this review help?
8
3
Share
More Forum Discussions

Has the Lexus CT200h been discontinued?

Lexus CT200h has not been discontinued. Lexus produces cars of exceptional quality, generally with extremely low failure rates, and this applies to hybrid models as well. As long as the vehicle is regularly maintained according to the specified schedule, you can use it with confidence. More details are as follows: 1. Power: The Lexus CT200h is equipped with a 1.8L naturally aspirated engine combined with an electric motor. The 1.8L naturally aspirated engine has a maximum power output of 99 horsepower, while the electric motor delivers a maximum power of 82 horsepower. The transmission is paired with an e-CVT continuously variable transmission, and the car's combined fuel consumption is 4.6L per 100 kilometers. 2. Fuel efficiency: As a hybrid model, the Lexus CT200h performs exceptionally well in terms of fuel consumption. The car utilizes the same third-generation hybrid system as the Prius, and during use, the fuel consumption remains around 4-5L per 100 kilometers.
8
2
Share

Can the license plate number follow the car when buying a used car?

When buying a used car, the license plate number cannot follow the car. During vehicle transfer, the license plate stays with the person, not the car. The license plate cannot be transferred with the car, nor can it be transferred separately. Below is some relevant information about used cars: 1. Overview: A used car refers to a motor vehicle that has been registered with the public security traffic management authorities, has not yet reached the national scrapping standards or is within its economic service life, and can still be used. 2. Suitable groups: The biggest selling point of used cars is their affordability. With the same amount of money needed to buy a new car, you can purchase a higher-grade used car. Therefore, from the perspective of reducing car purchase costs, buying a used car is a wiser choice for the general public. Additionally, for novice drivers who have just obtained their licenses but lack solid driving skills, buying a used car to practice is also a good option. For car enthusiasts who seek new experiences, used cars are an excellent choice.
7
0
Share

What does it mean when the ABS light is on in the car?

When the ABS light is displayed in the car, it indicates a malfunction in the vehicle's anti-lock braking system. If the wheels lock up during emergency braking, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. There are various states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections between system wires or poor contact in the ABS relay, leading to system failure. Solution: Check the wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. This may also occur if the ABS system's power supply voltage is too low, such as due to poor wire contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, poor contact in the ABS hydraulic valve body's wire connector, or ABS computer malfunction. Solution: Loosen the grounding screw of the hydraulic valve body, then retighten it, cleaning the contact surface if necessary. Check if the connector gap has widened. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant difference between the rear and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and use a finger to push the brake switch linkage down fully. Then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary.
6
5
Share

What to Do When Brakes Lock Up After Rain?

One method is to force start the engine and step hard on the accelerator; as long as the rear wheels move, the issue should resolve. Another approach is to remove the tire and lightly tap the brake drum with a hammer or similar tool a couple of times to loosen the contact surface between the brake drum and the brake pads. Below are the classifications related to brake lock-up: 1. Brake lock-up caused by the brake caliper not retracting: Simply put, even when not pressing the brake pedal, you still feel significant resistance from the vehicle. In severe cases, abnormal noises may occur, or the wheel may even lock up. If the brake fluid hasn't been changed for a long time, leading to internal rust in the brake caliper, it can be repaired by sanding with sandpaper and applying grease. If the caliper itself is faulty, it may need to be replaced directly. 2. Static wheel lock-up after parking: The vehicle is parked statically and locks up after sitting overnight. This phenomenon often occurs in vehicles with rear drum brakes. The friction pads are semi-metallic based, and the brake drums are made of cast iron. When the parking brake is engaged, the brake pads and brake drums are tightly pressed together. Exposure to water causes metal oxidation and rust, leading to adhesion. The solution is to spray rust remover or sand with sandpaper.
2
4
Share

Can a scooter carry passengers?

First of all, according to traffic regulations, light motorcycles are not allowed to carry passengers. Light motorcycles refer to those with an engine displacement greater than 36CC but less than 49CC (i.e., motorcycles with less than 50CC). Any motorcycle with a displacement greater than 50CC (including scooters) can carry passengers. Motorcycles, driven by gasoline engines and steered by handlebars to control the front wheel, are two-wheeled or three-wheeled vehicles that are lightweight, flexible, and fast. They are widely used for patrol, passenger and cargo transportation, and also serve as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. To drive a motorcycle, one needs an E or D driver's license, and the motorcycle must be registered to obtain a vehicle license for legal road use and passenger carrying. During operation, both the driver and passengers must wear safety helmets. Any motorcycle with a displacement greater than 50CC (including scooters) can carry passengers, regardless of the style; it is distinguished by displacement. No motorcycle is allowed to carry minors under the age of 12. When driving a two-wheeled motorcycle, if it is overloaded by one person—meaning the owner plus two passengers, totaling three people—even if the owner has all the necessary documents and everyone is wearing helmets, the mere act of overloading by one person will result in a fine and a deduction of three points by the traffic police. According to Article 92 of the "Road Traffic Safety Law": If a road passenger vehicle carries more passengers than the rated capacity, a fine of 200 to 500 yuan shall be imposed; if it exceeds the rated capacity by 20% or carries cargo in violation of regulations, a fine of 500 to 2,000 yuan shall be imposed. If a cargo motor vehicle exceeds the approved load capacity, a fine of 200 to 500 yuan shall be imposed; if it exceeds the approved load capacity by 30% or carries passengers in violation of regulations, a fine of 500 to 2,000 yuan shall be imposed.
12
5
Share

Why should you maintain a safe distance on waterlogged roads?

Water accumulation on the road can affect distance judgment due to reflections, make the surface slippery which increases braking distance, and create water spray from preceding vehicles that impairs visibility. Therefore, maintaining a safe distance is crucial. Below are relevant details about vehicle wading: 1. Introduction: Vehicle wading refers to driving through low-lying areas or waterlogged roads, typically occurring during rainy weather or in areas with inadequate drainage systems. 2. Precautions: Before wading, observe the road conditions carefully. Maintain steady power while driving through water, and inspect the electrical systems afterward. If the vehicle stalls in water, it should be towed to a 4S shop immediately for professional handling.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.