Is it mandatory to use an oil can for refueling motorcycles at gas stations?

1 Answers
MaverickDella
07/29/25 11:51pm
National regulations stipulate that motorcycles must use an oil can for refueling. Reasons why motorcycles must use an oil can for refueling: During the operation of a motorcycle's engine, a significant portion of the exhaust is emitted into the exhaust pipe without complete combustion, along with a considerable amount of spark particles. Due to high temperatures in summer, it poses a significant hazard if a motorcycle enters a gas station without turning off the engine. Additionally, immediately starting the motorcycle near the fuel dispenser after refueling can create a major safety risk due to spark particles in the exhaust or sparks generated during ignition. Precautions for motorcycle refueling: It is mandatory to use oil cans made of conductive materials such as iron or aluminum; plastic containers must not be used as oil cans, as they can easily cause electrostatic reactions leading to fires. During the movement of the oil can, it may also be affected by other static electricity, so the refueling operator must remain vigilant. Since motorcycle fuel tanks are generally small, gasoline spillage is likely, and because motorcycle engines are exposed, careful operation is required to prevent gasoline from dripping onto the hot engine and causing a fire.
Was this review help?
12
2
Share
More Forum Discussions

How to adjust the time on the Suzuki SX4 S-Cross dashboard?

The Suzuki SX4 S-Cross dashboard has two rods. To adjust the time, press and hold both rods simultaneously. After holding for a while and releasing, you will enter the time adjustment interface. Then use the right rod to adjust the time. Below is some relevant information: The Suzuki SX4 S-Cross is equipped with two engines, a 1.4-liter turbocharged engine and a 1.6-liter naturally aspirated engine. The 1.4-liter turbocharged engine has the code name K14C, with a maximum power of 103 kW, a maximum torque of 220 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 1700 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The transmission options paired with this engine are a 6-speed automatic transmission or a 6-speed manual transmission.
8
4
Share

What Causes High Temperature in Power Steering Pump Oil?

The main reasons for high temperature in power steering pump oil are as follows: 1. Dirty power steering fluid causing pipeline blockage, poor circulation, and insufficient heat dissipation (recommend replacing the steering fluid). 2. The steering wheel being held at extreme positions for extended periods, such as fully turned left or right, leading to high internal oil pressure in the steering gear. Operating in excessively high-temperature environments with prolonged high-load usage and insufficient cooling can also cause the oil temperature to rise. 3. Water entering the power steering fluid lowers its boiling point, reduces viscosity, and impairs cooling, leading to increased oil temperature. Conversely, excessively high viscosity increases fluid flow resistance and friction, also raising the temperature. 4. Quality issues with the power steering pump, such as overly tight internal bearing fits generating excessive heat, which is then transferred to the power steering fluid, resulting in high oil temperature in the pump.
8
5
Share

What colors does the Leiling have?

The Leiling is available in a variety of colors including Pearl White, Flame Red, Crystal Silver, Lemon Yellow, Sparkling Crystal Black, Nebula Purple, Sapphire Blue, and Coral Red. Among these, Lemon Yellow and Flame Red were added later, while Nebula Purple is exclusive to the hybrid version. The Leiling measures 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. The new Leiling sports version comes with additional sporty features such as front and rear aerodynamic bumpers, a sporty mesh piano black front grille, and exclusive sport-style seats. The gasoline sports version also features a lowered body stance. All new Leiling models come standard with LED headlights, one-touch up/down power windows for all four doors, and rear air vents.
20
0
Share

Which Button is for Cruise Control?

Currently, most cruise control systems primarily feature the following buttons: power key (ON/OFF), cancel key (CANCEL), set current speed (SET), resume set speed (RES). Acceleration is typically combined with the RES key, while deceleration is paired with the SET key. The specific usage methods are as follows: 1. Press the power key to activate the system, at which point the cruise control indicator on the dashboard will light up. 2. Accelerate to the desired speed and press the SET key, allowing you to release the throttle with your right foot as the speed is now set at the current rate. 3. Press "RES+" to increase speed at the current rate, or press "SET-" to decrease speed at the current rate. 4. There are three ways to deactivate cruise control: pressing the brake, pressing the cancel (CANCEL) key, or pressing the power (ON/OFF) key. 5. If cruise control is canceled by pressing the brake or the cancel key, you can press the RES key to resume the previous cruise control speed.
6
0
Share

How to Clean Off Adhesive from Film?

Methods to clean off adhesive from film include: 1. Use a cotton swab to apply vinegar on the residual adhesive. After the vinegar blends with the adhesive, wipe it off patiently with a cloth; 2. Apply essential balm on the adhesive, then scrape it off with a knife; 3. Evenly apply alcohol on the residual adhesive, which will soften as the alcohol erodes it, then wipe it off slowly; 4. Spray a specialized heat-insulating cleaner on the residual adhesive, which will melt in a short time, then wipe it clean with a cloth. The purposes of film are: 1. Reduce sunlight exposure and ensure safety; 2. Block UV rays, prevent skin damage, and reduce aging of car interiors; 3. Protect privacy and ensure safe driving performance; 4. Compensate for the loss of air conditioning cooling capacity, lower the interior temperature, and reduce air conditioning energy consumption; 5. Prevent secondary injuries to passengers from accidental glass breakage.
18
2
Share

Which transmission model is used in the Fengxing T5?

The Fengxing T5 is equipped with a BMW-licensed CE16 1.6TD turbocharged engine produced by New Torch Power. The Fengxing T5 is a compact 5-door, 5-seat SUV with body dimensions of 4460mm in length, 1820mm in width, and 1720mm in height, featuring a 2720mm wheelbase and a 45L fuel tank capacity. It is powered by a 1.5T turbocharged engine delivering a maximum power of 115 kW at 5000 rpm and a peak torque of 230 Nm between 1750 to 4600 rpm. The vehicle adopts a front-engine, front-wheel-drive layout, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.