···
Log in / Register

Is it mandatory to install a dash cam in the car?

4 Answers
Calvin
07/24/25 10:53am

There is no mandatory requirement for dash cams, so you don't have to install one. Here is more relevant information: 1. Benefits of installation: A dash cam can continuously record driving footage, which can be useful in cases of scratches, fraud, or traffic accidents. It can serve as evidence for traffic police to determine responsibility. If you want to avoid getting entangled in traffic disputes, it is recommended to install a dash cam. 2. Steps to install a dash cam: Remove the rearview mirror casing, detach the rearview mirror, slide the two metal clips downward, disconnect the rearview mirror cable after removing the casing, unplug the connector for the anti-glare rearview mirror, disassemble the dash cam mount, align the metal clips on both sides of the dash cam mount with the slots on the rain sensor mount, and push evenly upward on both sides until it slides to the bottom.

Was this review help?
10
5
Share
DiJames
08/11/25 2:31am

I don't think dash cams are legally required in vehicles, but based on my experience, I strongly recommend installing one. As a long-distance driver, I was once rear-ended on the highway, and the dash cam footage directly proved the other party was at fault, avoiding insurance disputes. It can also record unusual situations around you while driving, such as crash-for-cash scams or traffic violations, providing first-hand evidence. A high-quality one isn't expensive, just a few hundred yuan, and it's easy to install—you can stick it on the windshield yourself. During normal driving, it works automatically without disturbing you, yet brings peace of mind.

Was this review help?
18
0
Share
Expand All
PrestonRose
09/25/25 4:01am

From a safety perspective, I recommend equipping your car with a dashcam as it can capture accident scenes in real time and protect you from false accusations. Although it's not legally required, I've personally seen a friend suffer in an accident without a dashcam when the other party made false claims, slowing down the insurance claim process. A good dashcam is moderately priced and easy to maintain—just check the memory card and keep the lens clean. Having one installed gives you peace of mind while driving, especially in busy urban areas where minor collisions might occur, as video evidence can make the resolution process much smoother.

Was this review help?
18
1
Share
Expand All
Stuart
11/08/25 6:09am

The cost of installing a dash cam is actually quite low. I've seen basic models that only cost two to three hundred yuan and can last for several years. The benefits it brings are enormous: it records the driving process and provides direct evidence in case of a collision, saving time and effort. You can choose not to install one, but I've found it saves a lot of hassle, such as avoiding fraudulent claims or traffic violation records. I recommend choosing a model with night vision functionality. It's easy to install and doesn't take up much space in daily use.

Was this review help?
8
4
Share
Expand All
More Forum Discussions

Can the engine compartment be cleaned with a high-pressure water gun?

Engine compartment can be cleaned with a high-pressure water gun. Reasons for using a high-pressure water gun: The electrical component interfaces in the engine compartment are waterproofed and not afraid of water. Therefore, it is common practice in many places to directly rinse the engine compartment with a high-pressure water gun. This is routinely done by repair shops and 4S stores without damaging the components inside the engine compartment. Precautions when using a high-pressure water gun: Avoid rinsing with water when the engine is hot. Cleaning the engine when it is at high temperature can cause sudden cooling, which may lead to cylinder deformation or cracking in severe cases. Additionally, rinsing at high temperatures can produce a large amount of steam, which may affect the electrical circuits.
11
0
Share

Is the AC on or off when the light is on?

When the AC light is on, it indicates that the vehicle's compressor is in operation and the air conditioning system is activated. The AC button serves as the switch for the air conditioning compressor. During summer, when using the air conditioning, it is essential to press the AC button, with the AC light illuminated, to activate the cold air. Cold air is generated by pressurizing the refrigerant through the compressor, causing it to liquefy and then vaporize, absorbing a significant amount of heat from the air. When the cold air is on, the compressor pulley drives the compressor, increasing the engine load and consuming a certain amount of fuel. In contrast, warm air utilizes the vehicle's internal heat circulation and does not require the air conditioning compressor to be activated. Therefore, to use warm air, simply adjust the air conditioning controls without turning on the AC switch. Additional information: Considerations for car owners when pressing the AC button to activate the car air conditioning function in summer: 1. Open the windows before turning on the air conditioning: After the car has been exposed to the sun in summer, do not enter the vehicle immediately. Instead, either lower all windows or open the doors first, then turn on the fan to accelerate air circulation. Close the windows and turn on the air conditioning after a few minutes. 2. Direct the air conditioning vents upward: Choose to direct the airflow diagonally upward, taking advantage of the principle that hot air rises and cold air sinks, allowing the cold air to cool the interior from top to bottom.
20
0
Share

Can a Dash Cam See All Around the Vehicle?

A dash cam cannot see all around the vehicle; it can only capture the view in front of the car. The purpose of a dash cam: It effectively records drivers' violations such as speeding and fatigue driving, thereby monitoring the work quality of drivers, reducing the occurrence of traffic accidents, and improving vehicle operation standards. The functions of a dash cam: After powering on, the dash cam performs system checks on all components and interfaces; it has identity recognition capabilities; records and stores vehicle driving time, speed, and mileage; includes speeding alerts and recording functions; alerts and records for over-time driving and fatigue driving; features accident suspicion recording and analysis; data communication capabilities; and video image storage functions.
12
2
Share

Is ABS Plastic Durable?

ABS plastic is relatively durable. Properties of ABS plastic: It combines the common properties of its three components: A makes it chemically resistant, heat-resistant, and provides a certain surface hardness; B gives it high elasticity and toughness; S provides the processing and molding characteristics of thermoplastic plastics and improves electrical properties. Therefore, ABS plastic is a material that is easy to obtain, has good comprehensive performance, is inexpensive, and widely used, known for being "tough, hard, and rigid." Application fields of ABS plastic: The largest application areas are in the automotive, electronics, and construction industries. In the automotive sector, it is used for components such as car dashboards, body panels, interior trim panels, steering wheels, soundproof panels, door locks, bumpers, ventilation pipes, and many other parts.
17
2
Share

What is the Difference Between Yellow and White Parking Spaces?

The differences between yellow and white parking spaces lie in their usage standards and time restrictions. Different Usage Standards: Yellow line parking spaces indicate that the space is exclusive, designated for special vehicles such as fire trucks. If the marking appears as a single solid yellow line along the roadside, it means parking is prohibited in the area covered by the yellow solid line. White parking spaces, on the other hand, indicate paid parking spaces. Different Time Restrictions: Yellow line parking spaces have clear time restrictions. Near these spaces, there are usually relevant parking signs indicating the allowed parking times. White line parking spaces have no such restrictions and can be used 24 hours a day, but attention must be paid to the parking direction.
17
1
Share

What is the reason for oil level detection failure?

Oil level detection failure may be caused by a faulty oil level sensor or malfunctioning fuel gauge. The specific reasons and solutions are as follows: Faulty oil level sensor: The oil level sensor is a sliding rheostat connected to a float. When the liquid level changes, the float drives the rheostat, causing current changes, which in turn affects the gauge pointer. If the dashboard shows an oil level detection failure, it is highly likely due to a faulty oil level sensor. The solution is to replace the oil level sensor. Malfunctioning fuel gauge: If the fuel gauge readings fluctuate erratically or suddenly drop to zero, indicating an oil level detection failure, it may be due to a malfunctioning fuel gauge. The solution is to repair the fuel gauge.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.