···
Log in / Register

Is it mandatory to complete all driving license training hours?

5 Answers
GabrielleFitz
07/29/25 7:46am

It is mandatory to complete all driving license training hours before being eligible to schedule the exam. Below are the specific details regarding driving license training hours: 1. Duration: Subject 1 requires 12 training hours, Subject 2 requires 16 hours, Subject 3 (road driving) requires a minimum of 300 kilometers and 24 hours, and Subject 4 (safe and civilized driving) requires 10 hours. Each training hour consists of 60 minutes, with effective training time not less than 45 minutes. The total training hours for C1 and C2 licenses are 62 and 60 hours respectively, which is over 10 hours less than previous requirements. Each training hour is 60 minutes, with effective instruction time not less than 45 minutes. Each student's daily classroom learning and practical operation time must not exceed 4 hours. 2. Standards: Training begins with Subject 1 system learning time tracking, while Subjects 2 and 3 require system check-in photos + training mileage. All requirements must be met; failure to meet the standards will make the candidate ineligible to schedule the exam.

Was this review help?
17
0
Share
EllieAnn
08/13/25 2:18am

As a novice who just got my driver's license, I deeply understand the importance of completing all required driving course hours. The driving school mandates that all theoretical and practical lessons must be fully attended before taking the exam—this is a strict requirement. My friend was lazy and only completed most of the lessons, resulting in poor familiarity with parallel parking during the test. He failed twice and had to make up the lessons, wasting more time and money. The course hours cover everything from basic traffic rules to hands-on practice, and repeated practice naturally improves driving skills. From a safety perspective, insufficient training leads to weak skills, increasing the risk of accidents on the road. I recommend not skipping any lessons—completing them thoroughly is crucial for passing the test and ensuring safe driving. The attendance tracking system is strict, and missing classes can disqualify you from the exam. Overall, completing all required hours is essential for smoothly obtaining your license.

Was this review help?
20
5
Share
Expand All
Corbin
10/05/25 2:18am

I believe the required driving hours must be fully completed, especially for those who prioritize safety. The mandatory hours are set by regulatory authorities to ensure every trainee solidly masters driving skills. The curriculum covers critical content like emergency stops and curve handling – skipping any part might expose weaknesses during the road test. I've seen news reports about novices causing accidents due to insufficient training, which serves as a grave lesson. Even when pressed for time, prioritizing course completion is advisable. These hours aren't procedural; they genuinely build foundational skills to reduce on-road risks. Safety comes first – never take it lightly. Insufficient hours may lead to exam disqualification or expensive makeup sessions. Ultimately, honestly completing all hours benefits both individuals and society.

Was this review help?
19
1
Share
Expand All
Arya
11/18/25 3:49am

I always insist on completing the required driving hours. The hours are rules, and they must be fulfilled before taking the exam. If the hours are insufficient, the system will detect it and disqualify you. My experience: attend all classes on time, pass the exam in one go. The hours are limited, practice more to stay sharp. Don't try to save time or cut corners.

Was this review help?
15
5
Share
Expand All
RuthRose
01/08/26 5:28am

It's best to complete all the driving lessons, but if there's a time conflict, you can make up for them strategically. For example, arrange a concentrated make-up day to efficiently finish them. Driving schools allow for missed lessons to be made up, but they charge extra, which is more costly than failing the exam. The key is to master the skills, not just rush through the required hours. I missed two lessons and made them up later, and it went smoothly. Not completing all the lessons carries a high risk, making it easy to make mistakes during the road test. Ensuring the full number of lessons helps with passing.

Was this review help?
8
3
Share
Expand All
More Forum Discussions

Is it mandatory to have the first car maintenance at the designated 4S store?

The first car maintenance does not have to be done at the 4S store where the car was purchased. Relevant information is introduced as follows: The 4S store where the car was purchased usually offers free maintenance services. If the vehicle has exceeded the warranty period, you can choose to go to other professional car maintenance shops for service. When visiting the 4S store for the first maintenance, you need to bring the first maintenance voucher and the vehicle maintenance manual. The content of the first car maintenance includes: 1. Changing the engine oil, oil filter, and cleaning the air filter, as well as checking whether the generator belt and wiper blades are damaged. 2. Checking whether the levels of various fluids are normal. 3. Checking whether the tire pressure is normal and whether there is any uneven wear, bulging, or damage on the tires. 4. Inspecting the car chassis, including checking for any scratches on the brake pads, brake discs, connecting rods, ball joints, and CV joints. 5. Checking whether all switches and lights in the car are working properly.
8
2
Share

What is the following distance when the speed exceeds 100 km/h?

The following distance when the speed exceeds 100 km/h should be more than 100 meters. Below is additional information on following distances: 1. When visibility is less than 200 meters: Turn on fog lights, low beams, marker lights, and front and rear position lights. The speed should not exceed 60 km/h, and the distance from the vehicle in front in the same lane should be more than 100 meters. 2. When visibility is less than 100 meters: Turn on fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 km/h, and the distance from the vehicle in front in the same lane should be more than 50 meters. 3. When visibility is less than 50 meters: Turn on fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 km/h, and you should exit the highway at the nearest exit as soon as possible.
1
0
Share

What is the actual fuel consumption of the Polo 1.6?

The actual fuel consumption of the Polo 1.6 is 5.5 liters per 100 kilometers. There are many factors that affect actual fuel consumption, and the actual comprehensive fuel consumption depends on the actual driving conditions. Method to determine fuel consumption: You can judge the fuel consumption through the car's dashboard, where F=full (representing full) and E=empty (representing empty). When the fuel tank warning light comes on, record the mileage, then note how much fuel is added. When the fuel is next depleted, record the mileage again. Subtract the initial recorded mileage from the current mileage, then divide by the amount of fuel consumed to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but higher fuel consumption does not necessarily mean larger displacement. In a relative sense, the size of a car's engine displacement does not directly correlate with fuel consumption. Besides engine size, factors such as the car's shape, weight, and engine technology are also important factors affecting fuel consumption. Among models with the same displacement, the more advanced the engine technology, the more fuel-efficient the car will be.
13
3
Share

What is the content of the motorcycle charger wiring tutorial?

Motorcycle charger wiring tutorial: 1. Wiring: Connect the two metal clips from the charger output—the red clip is the positive pole and should be attached to the positive terminal of the battery; the black (or sometimes green or blue) clip is the negative pole and should be attached to the negative terminal of the battery. Remove all the caps from the battery to prevent the bubbles generated during charging from causing the battery case to burst. 2. Voltage adjustment: Set the charger output voltage to match the battery's rated voltage. Typically, motorcycle batteries are 12 volts, but some are 6 volts. 3. Power on: Reset the charging level to zero and turn on the charger power. 4. Increase the charging level: Gradually increase the charging level based on your desired charging speed—the lowest level is the slowest but ensures the most thorough charging. 5. Power off: When charging is complete, bubbles will appear in the battery acid, indicating that the battery is fully charged. Return the charging level to zero, turn off the charger power, and remove the metal clips.
14
2
Share

How to set up LuckyCam dash cam?

The setup method for the dash cam is as follows: 1. Resolution: Generally, dash cams offer four resolution options: 1080FHD, 720P, WVGA, and VGA. For memory cards below 8GB, it is recommended to choose 720P, while for those 16GB and above, 1080FHD is preferable. For daily urban use, setting it to 1080FHD can capture more detailed footage; for long-distance travel, it is advisable to set it to 720P to achieve longer recording times and avoid mid-journey video overwriting. 2. Loop recording: Most dash cams provide three time options: 1 minute, 2 minutes, and 3 minutes, dividing the video into segments of different durations for storage. It is recommended to choose 2-minute segments as they are more suitable. 3. Audio recording: The dash cam's audio recording setting records sounds inside the vehicle while driving. If privacy is a concern, you can choose to turn it off to avoid privacy leaks and unnecessary troubles. 4. Motion detection: The motion detection setting of the dash cam automatically records whenever there is movement in the frame, usually with a 2-5 second delay. It is not recommended to enable this feature while driving, as sensitivity and algorithm issues may cause significant frame loss.
5
3
Share

Are the speed limits for pickup trucks the same as for sedans on highways?

The speed limits for pickups and sedans on highways are different. The speed limit for pickups on highways is 100km/h. Here is an introduction to highway speed limit knowledge: 1. Maximum speed: Highways should indicate the driving speed of lanes. The maximum speed should not exceed 120 kilometers per hour, and the minimum speed should not be less than 60 kilometers per hour. The maximum speed of small passenger cars on highways should not exceed 120 kilometers per hour, other motor vehicles should not exceed 100 kilometers per hour, and motorcycles should not exceed 80 kilometers per hour. 2. Minimum speed: According to the "Regulations for the Implementation of the Road Traffic Safety Law," if there are 2 lanes in the same direction, the minimum speed of the left lane is 100 kilometers per hour; if there are 3 or more lanes in the same direction, the minimum speed of the leftmost lane is 110 kilometers per hour, and the minimum speed of the middle lane is 90 kilometers per hour. If the speed indicated by the road speed limit signs is inconsistent with the above lane driving speed regulations, drive according to the speed indicated by the road speed limit signs.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.